|Category||Power Management => Battery Management => Battery Chargers|
|Description||Standalone Linear Li-Ion Charger with Micropower Low Dropout Linear Regulator
The LTC®4063 is a standalone linear charger for single cell lithium-ion batteries with an adjustable low dropout linear regulator (LDO). The adjustable LDO regulates an output voltage between 1.2V to 4.2V at up to 100mA load current. When the input supply (wall adapter or USB supply) is removed, the LDO regulates the output voltage without interruption. The battery charger and LDO regulator can be enabled individually.
No external sense resistor or external blocking diode is required for charging due to the internal MOSFET architecture. Internal thermal feedback regulates the charge current to maintain a constant die temperature during high power operation or high ambient temperature conditions. The float voltage is fixed at 4.2V and the charge current is programmed with an external resistor. Charge termination methods include minimum charge current or maximum time. With power applied, the LTC4063 can be put into shutdown mode to reduce the supply current to 35µA and the battery drain current to less than 2µA.
Other features include smart recharge, undervoltage lockout, LDO current limiting and a charge status pin to indicate when the charge cycle has completed.
|Company||Linear Technology Corporation|
|Cross ref.||Similar parts: LM3658|
|Some Part number from the same manufacture Linear Technology Corporation|
|LT3483 Inverting Micropower DC/DC Converter with Schottky in ThinSOT PackageThe LT®3483 is a micropower inverting DC/DC converter with integrated Schottky and one resistor feedback. The small package size,|
|LT5525 High Linearity, Low Power Downconverting MixerThe LT®5525 is a low power broadband mixer optimized for high linearity applications such as point-to-point data transmission, high performance radios and wireless|
|LTC3406B-1.2 1.5MHz, 600mA Synchronous Step-Down Regulator in ThinSOTThe LTC®3406B-1.2 is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. Supply current|
|LTC3803-5 Constant Frequency Current Mode Flyback DC/DC Controller in ThinSOTVIN and VOUT Limited Only by External Components 4.8V Undervoltage Lockout Threshold Operating Junction Temperature from –40°C to 150°C|
|LT3434 High Voltage 3A, 200kHz Step-Down Switching Regulator with 100µA Quiescent CurrentWide Input Range: 3.3V to 60V 3A Peak Switch Current Burst Mode® Operation: 100µA Quiescent Current** Low Shutdown|
|LTC2924 Quad Power Supply SequencerThe LTC®2924 is a power supply sequencer designed for use with external N-channel MOSFETs or power supplies with shutdown pins. Four power supplies can be fully sequenced by a single|
|LT3470 Micropower Buck Regulator with Integrated Boost and Catch DiodesThe LT®3470 is a micropower step-down DC/DC converter that integrates a 300mA power switch, catch diode and boost diode into a low profile|
|LTC3709 Fast 2-Phase, No RSENSE Synchronous DC/DC Controller with Tracking/SequencingThe LTC®3709 is a single output, dual phase, synchronous step-down switching regulator. The controller uses a constant on-time,|
|LT3782 2-Phase Step-Up DC/DC ControllerThe LT®3782 is a current mode two phase step-up DC/DC converter controller. Its high switching frequency (up to 500kHz) and 2-phase operation reduce system filtering capacitance|
|LTC3442 Micropower Synchronous Buck-Boost DC/DC Converter with Automatic Burst Mode OperationThe LTC®3442 is a highly efficient, fixed frequency, Buck-Boost DC/DC converter, which operates from input voltages|