Details, datasheet, quote on part number: HT48R0AA-1
PartHT48R0AA-1
CategoryPower Management => Lighting Controllers
DescriptionCost-Effective I/O Type 8-Bit OTP MCU
The HT48R0AA-1 is an 8-bit high performance, RISC architecture microcontroller devices specifically designed for cost-effective multiple I/O control product applications.

The advantages of low power consumption, I/O flexibility, timer functions, oscillator configuration options, HALT and wake-up functions, Watchdog Timer, buzzer driver, as well as low cost, enhance the versatility of these devices to suit a wide range of application possibilities such as industrial control, consumer products, subsystem controllers, etc.
CompanyHoltek Semiconductor Inc.
DatasheetDownload HT48R0AA-1 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Holtek HT-IDEHT-ICEMarvel Speech Music Micro Adlib Micro Magic Voice Green Dialer PagerPro Q-Voice Turbo Voice EasyVoice HandyWriter




 

Some Part number from the same manufacture Holtek Semiconductor Inc.
HT82M28A 3/5-Key USB Vista Tilt Optical Mouse ControllerHT82M28A is a Plug and Play 3D USB Mouse controller. The HT82M28A can support the USB Standard Requestas well as HID Class Request version 1.1. The Z-axis
HT46RU75D-1 Dual Slope A/D Type MCU with LCD The HT46RU75D-1 is an 8-bit high performance, RISC architecture microcontroller device specifically designed for A/D with LCD applications that interface directly to analog
HT82M25A 3/5-Key USB+PS/2 Optical Mouse ControllerGeneral DescriptionThese devices are Plug and Play Windows 2000 and 5-button 3D USB+PS/2 Mouse controllers. Fully supporting the USB standard request as well
HT82M35A 3/5-Key 3D PS/2 Optical Mouse Controller General DescriptionThe HT82M35X are designed as 3/5-key 3D PS/2 optical mouse controller. These have serial interface to access the sensor ADNS-5020 or the same
HT82M9BEE USB Mouse Encoder 8-Bit MCU with EEPROMGeneral DescriptionThe USB MCU OTP body is suitable for USB mouse and USB joystick devices. It consists of a Holtek high performance 8-bit MCU core for control
HT82M9AEE
HT7727A PFM Step-up DC/DC ConverterGeneral DescriptionThe HT77XXA series is a set of PFM step-up DC/DC converter with high efficiency and low ripple. The series features extremely low start-up voltage
HT47R10A-1 R-F Type 8-Bit MCUGeneral DescriptionThe HT47R10A-1/HT47C10-1 are 8-bit, high performance, RISC architecture microcontroller devices specifically designed for applications that interface directly
HT1632 32x8 & 24x16 LED Driver The HT1632 is a memory mapping LED display controller/driver, which can select a number of out bits and commons. These are 32 out bits & 8 commons and 24 out bits & 16 commons.
HT1647 4-Level Gray Scale 64x16 LCD Controller for I/O MCUHT1647 is a peripheral device specially designed for I/O type MCU used to expand the display capability. The max. display segment of the device are 1024
HT1647A 4-Level Gray Scale 64x16 LCD Controller for I/O MCUHT1647A is a peripheral device specially designed for I/O type MCU used to expand the display capability. The max. display segment of the device are 1024
HT46R343 A/D Type 8-Bit OTP MCU with OPA and 8x8 LED Driver The HT46R343 is 8-bit, high performance, RISC architecture microcontroller devices. With their fully integrated A/D converter they are especially suitable
HT1117 1A General Purpose LDOThe HT1117 devices are a series of three-terminal high current low voltage regulators. They can deliver an output current of 1A and can accept input voltages up to 12V. The devices
HT82J927A USB GamepadHT82J927A is designed as USB+ Vibration interface gamepad controller,The HT82J927A can easily used via the game controller input function on Windows 98SE/ 2000/XP/XP SP1/XP SP2/2000 SERVER/2003
HT83R074 Q-VoiceTMThe HT83R074 is 8-bit high performance microcontroller with voice synthesizer and tone generator. The HT83R074 is designed for applications on multiple I/Os with sound effects, such as voice
HT46R4A Cost-Effective A/D Type 8-Bit MCUThe HT46R4A is a device from the Cost-Effective A/D Type Series of MCUs. As an 8-bit high performance RISC architecture microcontroller, the device is designed especially
HT1086 1.5A General Purpose LDOThe HT1086 devices are a series of three-terminal high current low voltage regulators. They can deliver an output current of 1.5A and can accept input voltages up to 12V. The devices
HT45R35 C/R To F Type 8-Bit OTP MCUThe HT45R35 is an 8-bit high performance, RISC architecture microcontroller device specifically designed for cost-effective multiple I/O control product applications.The
HT82K72E One Channel Keyboard With R-F Type MCUThe device is an 8-bit high performance, RISC architecture microcontroller devices specifically designed for multiple I/O control product applications. With its internal
HT82A523R USB 2.0 Full Speed 8-Bit OTP MCUThis device is an 8-bit high performance RISC-like microcontroller designed for USB product applications. It is particularly suitable for use in products such as USB mouse
HT46R92 A/D Type 8-Bit MCU With 16x16 High Current LED DriverThe HT46R92 is an 8-bit high performance RISC architecture microcontroller, the device is designed especially for applications that interface directly
Same catergory

BTS442E2 : Smart Highside Power Switch. Overload protection Current limitation Short-circuit protection Thermal shutdown Overvoltage protection (including load dump) Fast demagnetization of inductive loads Reverse battery protection1) Undervoltage and overvoltage shutdown with auto-restart and hysteresis Open drain diagnostic output Open load detection in ON-state CMOS compatible input Loss.

LM8365 : Supervisory Function. LM8365 - Micropower Undervoltage Sensing Circuits With Programmable Output Delay, Package: SOT-23, Pin Nb=5.

LT1513 : Switching Chargers. LT1513, 2.5A High Current Sepic Constant Current/voltage Source.

LTC3728 : Step-Down. LTC3728, 36V Dual 550kHz, 2-Phase Synchronous Step-down Switching Regulator.

M54671SP : Drivers. 2-phase Stepper Motor Driver. The is a semiconductor IC to drive a bipolar stepper motor directly by controlling the coil current with the constant current method. q Wide output current control range 1200mA) q Bipolar and constant current q Built in a thermal shutdown circuit Comparator VR1 3 reference input(1) Bootstrap power 4 supply(1) Output power supply(1) Output(1) Current.

PT7708 : Non-Isolated DC-DC Converters. The is a next generation "Big Hammer", a high-performance Integrated Switching Regulator (ISR), which is made available in Power Trends' aluminum 27-pin SIP package. The PT7708 improves on the popular PT7706 with 20A of output current and short circuit protection. The PT7708 is suitable for existing 5V system designs that require power for the latest.

SC1551 : 1.5 Amp Low-dropout Regulator With Reset And Enable. The SC1551 high performance positive voltage regulator is designed for use in applications requiring low dropout performance to 1.5A. Additionally, the SC1551 provides excellent regulation over variations in line, load and temperature. Similar to Semtechs popular EZ1086, the SC1551 includes extra for maximum flexibility - a low power shutdown mode and a power-on.

SM6T : Transil->600W. Transil. PEAK PULSE POWER W (10/1000s) BREAKDOWN VOLTAGE RANGE : From 220 V. UNI AND BIDIRECTIONAL TYPES LOW CLAMPING FACTOR FAST RESPONSE TIME UL RECOGNIZED Transil diodes provide high overvoltage protection by clamping action. Their instantaneous response to transient overvoltages makes them particularly suited to protect voltage sensitive devices such as MOS Technology.

SPX8863 : 120 Ma, Low Dropout Voltage Regulator. Low Noise Output LDO 1% Initial Accuracy At 120mA Very Low Quiescent Current Low Dropout Voltage Current & Thermal Limiting Reverse-Battery Protection Wide Range of Fix Output Voltages 5.0V, & ADJ Zero Off-Mode Current Small 5-Pin SOT-23 Pin Compatible to MAX8863 APPLICATIONS PDA Battery Powered Systems Cellular Phone Cordless Telephones Radio Control.

S7AH-03C1A0 : NON-ISOLATED DC/DC CONVERTERS The Bel x7AH-03C1A0 modules are a series of non-isolated, step down DC/DC converters that operate from a nominal 3.3V source. These converters are available in a range of output voltages from 0.9V to 2.5V. It is packaged in a compact, overmolded package rated at 3A. Optional lead forming provides a vertical mount product.

SSM3J111TU : The ever-increasing functionality of portable devices like cell phone, DSC and portable audio device is increasing their battery loading. In order to realize longer set operation, we are trying to decrease the system power consumption by lowering the internal operating voltage. Especially, lowering the voltage of the power supply and decreasing the internal.

L6563S : AC-DC Conversion Enhanced transition-mode PFC controller. Tracking boost function Fast "bidirectional" input voltage feedforward (1/V2 correction) Interface for cascaded converter's PWM controller Remote ON/OFF control Accurate adjustable output overvoltage protection Protection against feedback loop disconnection (latched shutdown) Inductor saturation protection Low ( 100 A) start-up current 6 mA max. operating.

IR1152SPBF : One Cycle Control PFC IC Designed To Operate In Continuous Conduction Mode (CCM), Fixed 66kHz Switching Frequency PFC IR1152 power factor correction IC, based on IR proprietary \"One Cycle Control\" (OCC) technique, provides for high PF and excellent DC Bus regulation while enabling drastic reduction in component count, PCB area and design time as compared.

PT7M7823T : P Supervisor Circuits The PT7M7xxx family microprocessor (P) supervisory circuits are targeted to improve reliability and accuracy of power-supply circuitry in P systems. These devices reduce the complexity and number of components required to monitor power-supply and battery functions..

CM2830XIM89 : 300mA CMOS LDO The CM2830/CM2830A family is a positive voltage linear regulator developed utilizing CMOS technology featured low quiescent current (30 ÂA typ.), low dropout voltage, and high output voltage accuracy. Built-in low on-resistance transistor provides low dropout voltage and large output current. A 2.2 ÂF or greater can be used as an output.

 
0-C     D-L     M-R     S-Z