Details, datasheet, quote on part number: HT82M28A
PartHT82M28A
CategoryMicrocontrollers => 8 bit
Description3/5-Key USB Vista Tilt Optical Mouse Controller
HT82M28A is a Plug and Play 3D USB Mouse controller. The HT82M28A can support the USB Standard Request
as well as HID Class Request version 1.1. The Z-axis can support only Z/2 encoder scroller input. It requires minimal external components to implement 3D and Windows Vista 7 key USB mouse. All its features combined and make up this versatile Holtek 8-bit MCU with an on-chip USB interface logic. The USB is specified by the Universal Serial Bus Specification V2.0.
CompanyHoltek Semiconductor Inc.
DatasheetDownload HT82M28A datasheet
Quote
Find where to buy
 
  

 

Features, Applications
Features

Operating voltage: 4.4V~5.25V Compatible with Microsoft Windows 2000 and USB transceiver Single chip solution especially for USB mouse func-

Supports 5/7 buttons and Z-axis input Z-axis can support only encoder Z/2 scroller input Complete Universal Serial Bus specs V2.0 compati-

HALT function and wake-up feature reduce power

Plug and Play functions Minimal external components 6MHz crystal oscillator for system clock Interface compliant with A2620, A5020, and

Vista tilt mouse protocol supported 3 key or 5 key mode can be selected by circuit DPI can be selected high or low by circuit Tilt or Non-tilt protocol can be selected by circuit Serial Bus Interface Engine (SIE)

is a Plug and Play 3D USB Mouse controller. The HT82M28A can support the USB Standard Request as well as HID Class Request version 1.1. The Z-axis can support only Z/2 encoder scroller input. It requires minimal external components to implement 3D and Windows Vista 7 key USB mouse. All its features combined and make up this versatile Holtek 8-bit MCU with an on-chip USB interface logic. The USB is specified by the Universal Serial Bus Specification V2.0. The USB product of 5 key mode is 2083H, and the USB product of 3 key mode is 2082H.

Pin Name VSS V33O USBD+ USBDRESET SDIO I/O ¾ O I/O I I/O O SCLK I Negative power supply, ground 3.3V voltage output USB data plus, F/W auto-detect USBD+ for USB. USB data minus, F/W auto-detect USB- for USB. Chip reset input, low active Serial data for optical sensor IC SDIO Serial data for optical sensor IC SCLK DPI selection, N/C or GND(connect a 5.1kW pull-down resistor) For N/C-800dpi; GND-400dpi For N/C-1000dpi; GND-500dpi For N/C-800dpi; GND-1600dpi Click button detection. Input ports with 30kW pull-high resistor. Input ports with pull-high resistor. These pads can function as Left, Right, Middle, RB0, RB1, L_TILT and R_TILT button input lines. Z-axis input supports only Z/2 encoder scroller input. Drives LED output 5V positive power supply 6MHz OSC output 6MHz OSC input Description

Supply to VSS+6V MCU Input to VDD+0.3V USB Input to V33O+0.3V Note: These are stress ratings only. Stresses exceeding the range specified under ²Absolute Maximum Ratings² may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability. Storage to 125°C Operating to 70°C

Symbol VDD IDD ISUS VIL2 VIH2 VPOR IOL Parameter Operating Voltage Operating Current (Crystal OSC) USB Suspend Mode Input Low Voltage M, R, L_TILT, R_TILT) Input High Voltage M, R, L_TILT, R_TILT) Input Low Voltage (RESET) Input High Voltage (RESET) Built-in Power on Reset VDD Detection Voltage Sink Current (LED) Test Conditions VDD VOL=0.8V No load, fSYS=6MHz Conditions ¾ USB mode Min. Typ. Max. Ta=25°C Unit V mA

Symbol fSYS Parameter System Clock (Crystal OSC) Test Conditions VDD 5V Conditions ¾ Min. 0 Typ. 6000 Max. ¾


 

Some Part number from the same manufacture Holtek Semiconductor Inc.
HT46RU75D-1 Dual Slope A/D Type MCU with LCD The HT46RU75D-1 is an 8-bit high performance, RISC architecture microcontroller device specifically designed for A/D with LCD applications that interface directly to analog
HT82M25A 3/5-Key USB+PS/2 Optical Mouse ControllerGeneral DescriptionThese devices are Plug and Play Windows 2000 and 5-button 3D USB+PS/2 Mouse controllers. Fully supporting the USB standard request as well
HT82M35A 3/5-Key 3D PS/2 Optical Mouse Controller General DescriptionThe HT82M35X are designed as 3/5-key 3D PS/2 optical mouse controller. These have serial interface to access the sensor ADNS-5020 or the same
HT82M9BEE USB Mouse Encoder 8-Bit MCU with EEPROMGeneral DescriptionThe USB MCU OTP body is suitable for USB mouse and USB joystick devices. It consists of a Holtek high performance 8-bit MCU core for control
HT82M9AEE
HT7727A PFM Step-up DC/DC ConverterGeneral DescriptionThe HT77XXA series is a set of PFM step-up DC/DC converter with high efficiency and low ripple. The series features extremely low start-up voltage
HT47R10A-1 R-F Type 8-Bit MCUGeneral DescriptionThe HT47R10A-1/HT47C10-1 are 8-bit, high performance, RISC architecture microcontroller devices specifically designed for applications that interface directly
HT1632 32x8 & 24x16 LED Driver The HT1632 is a memory mapping LED display controller/driver, which can select a number of out bits and commons. These are 32 out bits & 8 commons and 24 out bits & 16 commons.
HT1647 4-Level Gray Scale 64x16 LCD Controller for I/O MCUHT1647 is a peripheral device specially designed for I/O type MCU used to expand the display capability. The max. display segment of the device are 1024
HT1647A 4-Level Gray Scale 64x16 LCD Controller for I/O MCUHT1647A is a peripheral device specially designed for I/O type MCU used to expand the display capability. The max. display segment of the device are 1024
HT46R343 A/D Type 8-Bit OTP MCU with OPA and 8x8 LED Driver The HT46R343 is 8-bit, high performance, RISC architecture microcontroller devices. With their fully integrated A/D converter they are especially suitable
HT1117 1A General Purpose LDOThe HT1117 devices are a series of three-terminal high current low voltage regulators. They can deliver an output current of 1A and can accept input voltages up to 12V. The devices
HT82J927A USB GamepadHT82J927A is designed as USB+ Vibration interface gamepad controller,The HT82J927A can easily used via the game controller input function on Windows 98SE/ 2000/XP/XP SP1/XP SP2/2000 SERVER/2003
HT83R074 Q-VoiceTMThe HT83R074 is 8-bit high performance microcontroller with voice synthesizer and tone generator. The HT83R074 is designed for applications on multiple I/Os with sound effects, such as voice
HT46R4A Cost-Effective A/D Type 8-Bit MCUThe HT46R4A is a device from the Cost-Effective A/D Type Series of MCUs. As an 8-bit high performance RISC architecture microcontroller, the device is designed especially
HT1086 1.5A General Purpose LDOThe HT1086 devices are a series of three-terminal high current low voltage regulators. They can deliver an output current of 1.5A and can accept input voltages up to 12V. The devices
HT45R35 C/R To F Type 8-Bit OTP MCUThe HT45R35 is an 8-bit high performance, RISC architecture microcontroller device specifically designed for cost-effective multiple I/O control product applications.The
HT82K72E One Channel Keyboard With R-F Type MCUThe device is an 8-bit high performance, RISC architecture microcontroller devices specifically designed for multiple I/O control product applications. With its internal
HT82A523R USB 2.0 Full Speed 8-Bit OTP MCUThis device is an 8-bit high performance RISC-like microcontroller designed for USB product applications. It is particularly suitable for use in products such as USB mouse
HT46R92 A/D Type 8-Bit MCU With 16x16 High Current LED DriverThe HT46R92 is an 8-bit high performance RISC architecture microcontroller, the device is designed especially for applications that interface directly
HT46R94 A/D Type 8-Bit MCU With 16x16 High Current LED DriverThe HT46R94 is an 8-bit high performance RISC architecture microcontroller, the device is designed especially for applications that interface directly
Same catergory

DS5000TK : DS5000TK Microcontroller Evaluation Kit. The is a development support system which allows immediate evaluation of the DS5000(T) Soft Microcontroller Module. It can also be easily modified to work with the DS2250(T) and DS2252T Microcontroller module as described later in this document. Materials provided with the kit include a DS5000T with 32 kilobytes of RAM, In-System Loader hardware, KIT.EXE.

GMS81C50xx : Remote Controller->Universal Remote Controller.

HT36A4 : MusicMCU Series. HT36A4 8-Bit Music Synthesizer MCU. Operating voltage: 2.4V~5.0V Operating frequency: 3.58MHz~12MHz (typ. 8MHz) 8 bidirectional I/O lines Two 8-bit programmable timer with 8 stage prescaler Watchdog Timer Built-in 8-bit MCU with 208´8 bits RAM Built-in 32K´16-bit ROM for program/data shared Mono output High D/A converter resolution: 16 bits Polyphonic to 8 notes Independent volume mix can be assigned.

HT83C51 : CISC->8051/80C51 Family->8031/8051. High Temperature 83c51 Microcontroller.

KMC908GZ16CFA : M68HC08 Family. MC68HC908GZ16 Technical Data. To provide the most up-to-date information, the revision of our documents on the World Wide Web will be the most current. Your printed copy may be an earlier revision. To verify you have the latest information available, refer to: http://motorola.com/semiconductors The following revision history table summarizes changes contained in this document. For your.

KS88P2148 : S3C8(KS88) Series. = KS88P2148 Single-chip CMOS Microcontroller ;; ROM(KB) = 48 ;; RAM(bytes) = 1040 ;; I/o Pins = 47 ;; Interrupt (Int/Ext) = 6/12 ;; Timer/counters = BT/WDT/WT/8T/16T ;; Serial Interface = Sio ;; LCD (Seg/Com) = 28/8 ;; ADC (BitxCh) = 8x4 ;; PWM(BitxCh) = (8x1) ;; Max. OSC.Freq. (MHz) = 8 ;; VDD(V) = 2.0~5.5 ;; Other = Buzzer Output,rc.

MB89625 : CISC->MB. 8-bit Proprietary Microcontroller. The MB89620 series has been developed as a general-purpose version of the F2MC*-8L family consisting of proprietary 8-bit, single-chip microcontrollers. In addition to the F2MC-8L CPU core which can operate at low voltage but at high speed, the microcontrollers contain a variety of peripheral functions such as timers, serial interfaces, an A/D converter,.

MSP430F122IDW : Ultra-Low Power Microcontrollers. ti MSP430F122, 16-Bit Ultra-low-power Microcontroller, 4kB Flash, 256B RAM, Usart, Comparator.

P87LPC767 : 80C51 architecture. P87LPC767; Low Power, Low Price, Low Pin Count (20 Pin) Microcontroller With 4-kbyte OTP And 8-bit A/D Converter;; Package: SOT146-1 (DIP20), SOT163-1 (SO20).

PIC16F73 : PICmicro with analog capability. Note the following details of the code protection feature on PICmicro® MCUs. The PICmicro family meets the s contained in the Microchip Data Sheet. Microchip believes that its family of PICmicro microcontrollers is one of the most secure products of its kind on the market today, when used in the intended manner and under normal conditions. There are dishonest.

SAB-C167CR-LMHA-step : High-end 16-bit Microcontroller With Optional On-chip CAN. Edition 2001-07 Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81541 München, Germany All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties,.

SAF-XC167CI-16F40F : Highest Performance For Industrial Applications. Edition 2003-06 Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81541 München, Germany © Infineon Technologies AG 2003. All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved.

ST2012 : LCD Controller. Working Voltage = 2.4~5.0 ;; ROM = 12 KB ;; RAM = 192B ;; Max. Display Size Com X Seg = 4X40 , 8 X 40 ;; I/o = Max.18 I/o (8 Output Only Share With LCD) ;; PWM DAC = Yes ;; LVD = no.

TMP47P823VF : CISC->TMP. CMOS 4-bit Microcontroller.

TMP87C874F : TLCS-870 Series. ROM Size = 8K X 8-bit ;; RAM Size = 512 X 8-bit ;; Supply Voltage = - ;; I/o Count = - ;; Unique = - ;; Additional Information = More Info.

SAF-XC164CM-8F20F : THE XC164CM series is the new family of the enhanced 16-bit microcontroller XC166 which offers impressive DSP performance and advanced interrupt handling combined with a powerful integrated peripheral set, high performance and reliable on-chip Flash memory..

MC8640DTVU1250HC : MPC8640 And MPC8640D Integrated Host Processor Hardware s Addendum s provided in this document supersede those in the MPC8640 and MPC8640D Integrated Host Processor Hardware s, Rev. 1 or later, for the part numbers listed in Table A only. s not addressed herein are unchanged..

HT45FM03B : Brushless DC Motor Flash Type 8-Bit MCU The HT45FM03B is 8-bit, high performance, RISC architecture microcontroller device which includes a host of fully integrated special specifically designed for brushless DC motor applications. The advantages of low power consumption, I/O flexibility, programmable frequency divider, timer functions, oscillator options,.

 
0-C     D-L     M-R     S-Z