|Category||Microcontrollers => 8 bit|
|Description||USB Mouse Encoder 8-Bit MCU with EEPROM
The USB MCU OTP body is suitable for USB mouse and USB joystick devices. It consists of a Holtek high performance 8-bit MCU core for control unit, built-in USB SIE, 8Kx16 ROM and 224 bytes data RAM.
The mask version HT82M9BAE is fully pin and functionally compatible with the OTPversion HT82M9BEE device. There are two dice in the HT82M9BEE/HT82M9BAE package: one is the HT82M9BE/HT82M9BA MCU, the other is a 128x8 bits EEPROM used for data memory purpose. The two dice are wrie-bonded to from HT82M9BEE/HT82M9BAE.
|Company||Holtek Semiconductor Inc.|
|Datasheet||Download HT82M9BEE datasheet
Flexible total solution for applications that combine 6MHz/12MHz internal CPU clock 8-level stacks Two 8-bit indirect addressing registers One 8-bit programmable timer counter with overflowPS/2 and low-speed USB interface, such as mice, joysticks, and many others
USB Specification Compliance - Conforms to USB specification V1.1 - Conforms to USB HID specification V1.1 Supports 1 low-speed USB control endpoint and
Each endpoint has 8´8 bytes FIFO Integrated USB transceiver 3.3V regulator output External or 12MHz ceramic resonator or crystal 8-bit RISC microcontroller, with 8K´16 programOne USB interrupt input (vector 04H) HALT function and wake-up feature reduce power
Internal Power-On reset (POR) Watchdog Timer (WDT) 20 I/O ports 24/28-pin SOP package
The USB MCU OTP body is suitable for USB mouse and USB joystick devices. It consists of a Holtek high performance 8-bit MCU core for control unit, built-in USB SIE, 8K´16 ROM and 224 bytes data RAM. The mask version HT82M9BAE is fully pin and functionally compatible with the OTP version HT82M9BEE device. There are two dice in the HT82M9BEE/HT82M9BAE package: one is the HT82M9BE/HT82M9BA MCU, the other a 128´8 bits EEPROM used for data memory purpose. The two dice are wrie-bonded to from HT82M9BEE/ HT82M9BAE.
Bidirectional 8-bit input/output port. Each bit can be configured as a wake-up input by ROM code option. The input or output mode is controlled by PAC (PA control register). Pull-high resistor options: PA0~PA7 Pull-low I/O Pull-low resistor options: PA0~PA3 Wake-up CMOS/NMOS/PMOS options: PA0~PA7 Falling edge wake-up options: PA0~PA1, PA4~PA7 Rising and falling edge wake-up options: PA2~PA3 Bidirectional 8-bit input/output port. Software instructions determine the CMOS output or Schmitt trigger input with pull-high resistor (determined by pull-high options). PB4 is wire-bonded with the SDA pad of the Data EEPROM. PB7 is wire-bonded with the SCL pad of the Data EEPROM. Pull-high resistor options: PB0~PB7 Pull-low resistor for options: PB2, PB3 Falling edge wake-up options: PB4/SDA, PB7/SCL Bidirectional 8-bit input/output port. Software instructions determine the CMOS output or Schmitt trigger input with pull-high resistor (determined by pull-high options). Pull-high resistor options: PC0~PC3 Negative power supply, ground Schmitt trigger reset input. Active low. Positive power supply 3.3V regulator output USBD+ or PS2 CLK I/O line USB or PS2 function is controlled by software control register USBD- or PS2 DATA I/O line USB or PS2 function is controlled by software control register OSCI, OSCO are connected or 12MHz crystal/resonator (determined by software instructions) for the internal system clock.
Supply to VSS+6.0V Input to VDD+0.3V IOL Total..............................................................150mA Total Power Dissipation.....................................500mW Note: These are stress ratings only. Stresses exceeding the range specified under ˛Absolute Maximum Ratings˛ may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability. Storage to 125°C Operating to 70°C IOH Total............................................................-100mA
|Related products with the same datasheet|
|Some Part number from the same manufacture Holtek Semiconductor Inc.|
|HT82M9BAE USB Mouse Encoder 8-Bit MCU with EEPROMGeneral DescriptionThe USB MCU OTP body is suitable for USB mouse and USB joystick devices. It consists of a Holtek high performance 8-bit MCU core for control|
|HT7727A PFM Step-up DC/DC ConverterGeneral DescriptionThe HT77XXA series is a set of PFM step-up DC/DC converter with high efficiency and low ripple. The series features extremely low start-up voltage|
|HT47R10A-1 R-F Type 8-Bit MCUGeneral DescriptionThe HT47R10A-1/HT47C10-1 are 8-bit, high performance, RISC architecture microcontroller devices specifically designed for applications that interface directly|
|HT1632 32x8 & 24x16 LED Driver The HT1632 is a memory mapping LED display controller/driver, which can select a number of out bits and commons. These are 32 out bits & 8 commons and 24 out bits & 16 commons.|
|HT1647 4-Level Gray Scale 64x16 LCD Controller for I/O MCUHT1647 is a peripheral device specially designed for I/O type MCU used to expand the display capability. The max. display segment of the device are 1024|
|HT1647A 4-Level Gray Scale 64x16 LCD Controller for I/O MCUHT1647A is a peripheral device specially designed for I/O type MCU used to expand the display capability. The max. display segment of the device are 1024|
|HT46R343 A/D Type 8-Bit OTP MCU with OPA and 8x8 LED Driver The HT46R343 is 8-bit, high performance, RISC architecture microcontroller devices. With their fully integrated A/D converter they are especially suitable|
|HT1117 1A General Purpose LDOThe HT1117 devices are a series of three-terminal high current low voltage regulators. They can deliver an output current of 1A and can accept input voltages up to 12V. The devices|
|HT82J927A USB GamepadHT82J927A is designed as USB+ Vibration interface gamepad controller,The HT82J927A can easily used via the game controller input function on Windows 98SE/ 2000/XP/XP SP1/XP SP2/2000 SERVER/2003|
|HT83R074 Q-VoiceTMThe HT83R074 is 8-bit high performance microcontroller with voice synthesizer and tone generator. The HT83R074 is designed for applications on multiple I/Os with sound effects, such as voice|
|HT46R4A Cost-Effective A/D Type 8-Bit MCUThe HT46R4A is a device from the Cost-Effective A/D Type Series of MCUs. As an 8-bit high performance RISC architecture microcontroller, the device is designed especially|
|HT1086 1.5A General Purpose LDOThe HT1086 devices are a series of three-terminal high current low voltage regulators. They can deliver an output current of 1.5A and can accept input voltages up to 12V. The devices|
|HT45R35 C/R To F Type 8-Bit OTP MCUThe HT45R35 is an 8-bit high performance, RISC architecture microcontroller device specifically designed for cost-effective multiple I/O control product applications.The|
|HT82K72E One Channel Keyboard With R-F Type MCUThe device is an 8-bit high performance, RISC architecture microcontroller devices specifically designed for multiple I/O control product applications. With its internal|
|HT82A523R USB 2.0 Full Speed 8-Bit OTP MCUThis device is an 8-bit high performance RISC-like microcontroller designed for USB product applications. It is particularly suitable for use in products such as USB mouse|
|HT46R92 A/D Type 8-Bit MCU With 16x16 High Current LED DriverThe HT46R92 is an 8-bit high performance RISC architecture microcontroller, the device is designed especially for applications that interface directly|
|HT46R94 A/D Type 8-Bit MCU With 16x16 High Current LED DriverThe HT46R94 is an 8-bit high performance RISC architecture microcontroller, the device is designed especially for applications that interface directly|
|HT82A834R USB Audio MCUThe HT82A834R is an 8-bit high performance RISC-like microcontroller designed for USB Phone product applications. The HT82A834R combines a 16-bit PCM ADC, USB transceiver, SIE (Serial Interface|
|HT46R4AE Cost-Effective A/D Type 8-Bit MCUThe HT46R4AE is a device from the Cost-Effective A/D Type Series of MCUs. As an 8-bit high performance RISC architecture microcontroller, the device is designed especially|
|HT46RU67 A/D Type 8-Bit MCU With LCDThe HT46RU67/HT46CU67 are 8-bit, high performance, RISC architecture microcontroller devices specifically designed for A/D product applications that interface directly to analog|
HI-8444 : ARINC 429 Databus Quad Arinc 429 Line Receiver
HI-8585PSI : Arinc 429 Line Driver
HI-8589PJI : Arinc 429 Transceiver With Line Driver & Dual Line Receiver
HT7330 : Low Power Consumption LDO The HT73XX Series is a Set of Three-terminal, Low Power, High Voltage Regulators Implemented in CMOS Technology. The Series Features Extremely Low Quiescent Current Which is Typically 4mA. They Allow Input Voltages as High as 12V. The Device Provides Large Current Wit
HT48R12 : 8-bit Microcontroller Series
HI-8591CRM : Arinc 429 LINE Driver AND DUAL Receiver
HI-8591PDM-40 : Arinc 429 LINE Driver AND DUAL Receiver
LTC6247CKC#TRMPBF : 180MHz, 1mA Power Efficient Dual Rail-to-Rail I/O Op Amps The LTC6246/LTC6247/LTC6248 are single/dual/quad low power, high speed unity gain stable rail-to-rail input/output operational amplifiers. On only 1mA of supply current they feature an impressive 180MHz gain-bandwidth product, 90V/?s slew ra
LTC6991IS6#TRMPBF : Resettable Low Frequency Oscillator The LTC6991 is a silicon oscillator with a programmable period range of 1.024ms to 9.54 hours (29.1?Hz to 977Hz), specifically intended for long duration timing events. The LTC6991 is part of the TimerBlox™ family of versatile silicon timing devices. A single
HI-3583ACJT : 2 CHANNEL(S), 125K bps, SERIAL COMM CONTROLLER, CQCC52 Specifications: Technology: CMOS ; Device Type: Line / Bus Controller ; Supply Voltage: 3.3V ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Package Type: CERAMIC, QUAD-52 ; Pins: 52
HI-8596PCIF : LINE DRIVER, CDIP16 Specifications: Technology: CMOS ; Device Type: Line / Bus Driver ; Supply Voltage: 3.3V ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Package Type: DIP, ROHS COMPLIANT, CERAMIC, SIDE BRAZED, DIP-16 ; Pins: 16
CXP820P60 : CMOS 8-bit Single Chip Microcomputer. The is a CMOS 8-bit single chip microcomputer integrating on a single chip an A/D converter, serial interface, timer/counter, time-base timer, capture timer/counter, fluorescent display panel controller/driver, remote control reception circuit, and PWM output circuit besides the basic configurations of 8-bit CPU, ROM, RAM, and I/O port. The CXP820P60.
CXP87240A : CMOS 8-bit Single Chip Microcomputer. The is a CMOS 8-bit microcomputer which consists of A/D converter, serial interface, timer/counter, time base timer, vector interruption, high precision timing pattern generation circuit, PWM generator, PWM for tuner, VISS/VASS circuit, 32kHz timer/event counter, remote control receiving circuit, general purpose prescaler, HSYNC counter, VCR vertical.
HTG12B0 : 4-bit Microcontroller. Operating voltage: 2.4V~3.6V Eight input lines Eight input/output lines Five working registers 4K program ROM bits data memory RAM Sound effect circuit 40 segment ´ 16 common, 1/4 bias LCD driver LCD output is fixed at 4.4V RC oscillator & 32768Hz crystal oscillator 8-bit timer with internal or external clock source Internal timer overflow to 4ms instruction.
KMP47C210 : 4-bit Microcontrollers.
KS57C21832 : The Ks57c21832 Single-chip CMOS Microcontroller Has Been Designed For High Performance Using Samsungs Newest 4-bit Cpu Core, Sam47 ( Samsung Arrangeabl.
KS86C0004 : S3C9(KS86) Series. = KS86C0004 Single-chip 8-bit Microcontroller ;; ROM(KB) = 4 ;; RAM(bytes) = 208 ;; I/o Pins = 32 ;; Interrupt (Int/Ext) = 1/12 ;; Timer/counters = BT/WDT/8T ;; Serial Interface = - ;; LCD (Seg/Com) = - ;; ADC (BitxCh) = - ;; PWM(BitxCh) = (8x1) ;; Max. OSC.Freq. (MHz) = 4 ;; VDD(V) = 4.5~5.5 ;; Other = RC Osc. Only ;; Package = 40DIP.
MC9S12DB128 : M68HC12 Family. Mc9s12dt128 Device User Guide V02.09. Original Release Date: 18 June 2001 Revised: 15 October 2003 Motorola reserves the right to make changes without further notice to any products herein to improve reliability, function or design. Motorola does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license.
NT68F62 : 8-Bit Microcontroller For Monitor. Operating voltage range: to 5.5V CMOS technology for low power consumption 6502 8-bit CMOS CPU core 8 MHz operation frequency 32K bytes of flash memory for Multi -Times Program 512 bytes of RAM 2Kbytes Masked BootROM for ISP. One 8-bit base timer 13 channels of 8-bit PWM outputs with 5V open drain 4 channel A/D converters with 6-bit resolution 25 bi-directional.
PCD5003A : PCD5003A; Enhanced Pager Decoder For Pocsag. Product File under Integrated Circuits, IC17 1999 Jan 08 CONTENTS APPLICATIONS GENERAL ORDERING INFORMATION BLOCK DIAGRAM PINNING FUNCTIONAL Introduction The POCSAG paging code Error correction Operating states ON status OFF status Reset Bit rates Oscillator Input data processing Battery saving Synchronization strategy Call termination Enhanced call.
S3C7528 : S3C7(KS57) Series. = S3C7528 Single-chip CMOS Microcontroller ;; ROM(KB) = 4,8 ;; RAM Nibble = 768 ;; I/o Pins = 35 ;; Interrupt (Int/Ext) = 3/3 ;; Timer/counters = BT/WT/WDT/8Tx2 ;; Sio = - ;; LCD (Seg/Com) = - ;; ADC (BitxCh) = - ;; PWM(BitxCh) = - ;; Max. OSC.Freq. (MHz) = 6 ;; VDD(V) = 1.8~5.5 ;; Other = DTFM Generator,watchdog Timer Function ;; Package.
SAF-C505L-4EM : 8-bit Microcontroller With On-chip LCD. C505L Data Sheet Revision History: Previous Releases: Page (new Page (prev. Subjects (changes since last revision) version) - For questions on technology, delivery and prices please contact the Infineon Technologies Offices in Germany or the Infineon Technologies Companies and Representatives worldwide: see our webpage at http://www.infineon.com. Enhanced.
ST10C167 : ST10 Family. 16-BIT MCU - 4KB RAM - 32KB ROM - 111 I/o - 1 CAN 2.0B Interface.
TS83C251G2D : 8051 Architecture. 8/16-bit Microcontroller With Serial Communication Interfaces - 32Kbytes ROM.
UPD78F4225Y : CISC->uPD. 16/8-bit Single-chip Microcontrollers. The is a product in the µPD784225Y subseries in the 78K/IV series. The µPD78F4225Y has a flash memory in the place of the internal ROM of the µPD784225Y. Data can be written to or erased from the flash memory of the µPD78F4225F with the microcontroller mounted on a printed wiring board. The µPD78F4225Y is based on the µPD78F4225 with I 2C bus control.
Z86E04 : OTP (KB) = 1 ;; RAM = 125 ;; Speed = 12 ;; I/O = 14 ;; 8-bit Timers = 2 ;; Comm Interfaces = -- ;; Other = Por, LV Protect ;; Voltage = 4.5-5.5V ;;.
SAF-C515C-8EM CA : 8-Bit Single-Chip Microcontroller The high peripheral performance and the CAN feature is ideal for automotive and industrial control applications. Due to EMC/RFI enhancements and power consumption reduction this design excels especially for car radio applications..
TMP92CM22FG : TOSHIBA Original CMOS 32-Bit Microcontroller TLCS-900/H1 Series TMP92CM22FG.
HT48F10E : The HT48F10E is an 8-bit high performance, RISC architecture microcontroller device specifically designed for multiple I/O control product applications. The advantages of low power consumption, I/O flexibility, timer functions, oscillator options, HALT and wake-up functions, watchdog timer, buzzer driver, as well as low cost, enhance the versatility.
MCF52110 : The MCF52110 is a member of the ColdFire® family of reduced instruction set computing (RISC) microprocessors. This document provides an overview of the 32-bit MCF52110 microcontroller, focusing on its highly integrated and diverse feature set.
MSP430F2618 : 16-Bit Ultra-Low-Power MCU, 92KB Flash, 4KB RAM, 12-Bit ADC, Dual DAC, 2 USCI, HW Mult, DMA The Texas Instruments MSP430 family of ultralow-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended.