Digchip : Database on electronics components
Electronics components database



Details, datasheet, quote on part number: LTC3115-1
 
 
Part numberLTC3115-1
Category => LTC3115-1 - 40V, 2A Synchronous Buck-Boost DC/DC Converter
TitleLTC3115-1 - 40V, 2A Synchronous Buck-Boost DC/DC Converter
DescriptionThe LTC3115-1 is a high voltage monolithic synchronous buck-boost DC/DC converter. Its wide 2.7V to 40V input and output voltage ranges make it well suited to a wide variety of automotive and industrial applications. A proprietary low noise switching algorithm optimizes efficiency with input voltages that are above, below or even equal to the output voltage and ensures seamless transitions between operational modes.

Programmable frequency PWM mode operation provides low noise, high efficiency operation and the ability to synchronize switching to an external clock. Switching frequencies up to 2MHz are supported to allow use of small valued inductors for miniaturization of the application circuit. Pin selectable Burst Mode operation reduces standby current and improves light load efficiency which combined with a 3μA shutdown current make the LTC3115-1 ideally suited for battery-powered applications. Additional features include output disconnect in shutdown, short-circuit protection and internal soft-start. The LTC3115-1 is available in thermally enhanced 16-lead 4mm 5mm 0.75mm DFN and 20‑lead TSSOP packages.
CompanyLinear Technology Corporation
DatasheetDownload LTC3115-1 datasheet
 
Click to zoom LTC3115-1 photo


 
Specifications, Features, Applications

DESCRIPTION

The is a high voltage monolithic synchronous buck-boost DC/DC converter. Its wide to 40V input and output voltage ranges make it well suited to a wide variety of automotive and industrial applications. A proprietary low noise switching algorithm optimizes efficiency with input voltages that are above, below or even equal to the output voltage and ensures seamless transitions between operational modes. Programmable frequency PWM mode operation provides low noise, high efficiency operation and the ability to synchronize switching to an external clock. Switching frequencies to 2MHz are supported to allow use of small valued inductors for miniaturization of the application circuit. Pin selectable Burst Mode operation reduces standby current and improves light load efficiency which combined with a 3A shutdown current make the LTC3115-1 ideally suited for battery-powered applications. Additional features include output disconnect in shutdown, short-circuit protection and internal soft-start. The LTC3115-1 is available in thermally enhanced 0.75mm DFN and 20lead TSSOP packages.

L, LT, LTC, LTM, Burst Mode, LTspice, Linear Technology and the Linear logo are registered trademarks and No RSENSE is a trademark of Linear Technology Corporation. All other trademarks are the property of their respective owners. Protected by U.S. Patents including 6404251, 6166527 and others pending.

Wide VIN Range: to 40V Wide VOUT Range: 40V 1A Output Current for VIN 3.6V, VOUT 5V 2A Output Current in Step-Down Operation for VIN 6V Programmable Frequency: to 2MHz Supports Synchronization with an External Clock to 95% Efficiency 50A Burst Mode Quiescent Current Ultralow Noise Buck-Boost PWM Internal Soft-Start 3A Supply Current in Shutdown Programmable Input Undervoltage Lockout Small 0.75mm DFN Package Thermally Enhanced 20-Lead TSSOP Package

APPLICATIONS

24V/28V Industrial Applications Automotive Power Systems Telecom, Servers and Networking Equipment FireWire Regulator Multiple Power Source Supplies

VIN, PVIN, VOUT, PVOUT............................... VSW1, VSW2 DC............................................ 0.3V to (PVIN + 0.3V) Pulsed (<100ns).......................1.5V to (PVIN + 1.5V) VRUN........................................................... + 6V

Voltage, All Other Pins.................................. to 6V Operating Junction Temperature Range (Notes to 125C Storage Temperature Range................... to 150C Lead Temperature (Soldering, 10 sec) FE...................................................................... 300C

TOP VIEW RUN SW2 PVOUT GND FB RT PGND 17 16 PWM/SYNC SW1 14 PVIN BST2 11 PVCC 10 VIN 9 VCC

DHD PACKAGE 4mm) PLASTIC DFN TJMAX = 4.3C/W EXPOSED PAD (PIN 17) IS PGND, MUST BE SOLDERED TO PCB

FE PACKAGE 20-LEAD PLASTIC TSSOP TJMAX = 10C/W EXPOSED PAD (PIN 21) IS PGND, MUST BE SOLDERED TO PCB FOR RATED THERMAL PERFORMANCE

LEAD FREE FINISH LTC3115EFE-1#PBF LTC3115IFE-1#PBF TAPE AND REEL LTC3115EFE-1#TRPBF LTC3115IFE-1#TRPBF PART MARKING* 31151 LTC3115FE-1 PACKAGE DESCRIPTION 4mm) Plastic DFN 4mm) Plastic DFN 20-Lead Plastic TSSOP 20-Lead Plastic TSSOP TEMPERATURE RANGE to 125C

Consult LTC Marketing for parts specified with wider operating temperature ranges. *The temperature grade is identified by a label on the shipping container. Consult LTC Marketing for information on non-standard lead based finish parts. For more information on lead free part marking, go to: http://www.linear.com/leadfree/ For more information on tape and reel specifications, go to: http://www.linear.com/tapeandreel/

LTC3115-1 ELECTRICAL CHARACTERISTICS The l denotes the specifications which apply over the full operating

junction temperature range, otherwise specifications are for = 25C (Note 2). VIN = 24V, VOUT = 5V, unless otherwise noted.

PARAMETER Input Operating Voltage Output Operating Voltage Input Undervoltage Lockout Threshold Input Undervoltage Lockout Hysteresis VCC Undervoltage Lockout Threshold VCC Undervoltage Lockout Hysteresis Input Current in Shutdown Input Quiescent Current in Burst Mode Operation Oscillator Frequency Oscillator Operating Frequency PWM/SYNC Clock Input Frequency PWM/SYNC Input Logic Threshold Soft-Start Duration Feedback Voltage Feedback Voltage Line Regulation Feedback Pin Input Current RUN Pin Input Logic Threshold RUN Pin Comparator Threshold RUN Pin Hysteresis Current RUN Pin Hysteresis Voltage Inductor Current Limit Reverse Inductor Current Limit Burst Mode Inductor Current Limit Maximum Duty Cycle Minimum Duty Cycle SW1, SW2 Minimum Low Time N-Channel Switch Resistance

N-Channel Switch Leakage PVCC/VCC External Forcing Voltage VCC Regulation Voltage VCC Load Regulation VCC Line Regulation VCC Current Limit VCC Dropout Voltage VCC Reverse Current

(Note 3) (Note 3) (Note 3) Percentage of Period SW2 is Low in Boost Mode (Note 5) Percentage of Period SW1 is High in Buck Mode (Note = 35.7k (Note 5) Switch A (From PVIN to SW1) Switch B (From SW1 to PGND) Switch C (From SW2 to PGND) Switch D (From PVOUT to SW2) PVIN = PVOUT = 0V IVCC = 1mA IVCC to 20mA IVCC = 1mA, VIN to 40V VCC = 2.5V IVCC = 5mA, VIN = 2.7V VCC = 5V, VIN = 3.6V

Note 1: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to any Absolute Maximum Rating condition for extended periods may affect device reliability and lifetime. Note 2: The LTC3115-1 is tested under pulsed load conditions such that TJTA. The LTC3115E-1 is guaranteed to meet specifications from to 85C junction temperature. Specifications over the to 125C operating junction temperature range are ensured by design, characterization and correlation with statistical process controls. The LTC3115I-1 specifications

are guaranteed over the to 125C operating junction temperature range. The maximum ambient temperature is determined by specific operating conditions in conjunction with board layout, the rated package thermal resistance and other environmental factors. The junction temperature (TJ in C) is calculated from the ambient temperature (TA in C) and power dissipation (PD in Watts) according to the following formula: TA + (PD JA) where JA is the thermal impedance of the package.




Some Part number from the same manufacture Linear Technology Corporation
LTC2369-18 The LTC2369-18 is a low noise, low power, high speed 18-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply, the LTC2369-18 has a 0V to VREF pseudo-differential unipolar input
LTC2158-14 Dual 14-Bit 310Msps ADC The LTC2158-14 is a 2-channel simultaneous sampling 310Msps 14-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. It is perfect for demanding
LTC2369-18 8-Bit, 1.6Msps, Pseudo- Differential Unipolar SAR ADC With 96.5dB SNR The LTC2369-18 is a low noise, low power, high speed 18-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply,
LTC2370-16 16-Bit, 2Msps, Pseudo- Differential Unipolar SAR ADC With 94dB SNR The LTC2370-16 is a low noise, low power, high speed 16-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply,
LTC5593 Dual 2.3GHz To 4.5GHz High Dynamic Range Downconverting Mixer The LTC5593 is part of a family of dual-channel high dynamic range, high gain downconverting mixers covering the 600MHz to 4.5GHz RF frequency
LTC4313 2-Wire Bus Buffers With High Noise Margin The LTC4313 is a hot swappable 2-wire bus buffer that provides bidirectional buffering while maintaining a low offset voltage and high noise margin up to 0.3 VCC.
LTC4315 2-Wire Bus Buffer With High Noise Margin The LTC4315 is a hot-swappable 2-wire bus buffer that provides bidirectional buffering, while maintaining a low offset voltage and high noise margin up to 0.3 VCC.
LTM8048 3.1VIN To 32VIN Isolated μModule DC/DC Converter With LDO Post Regulator The LTM8048 is an isolated flyback μModule DC/DC converter with LDO post regulator. The LTM8048 has an isolation rating of 725VDC.
LT3973 42V, 750mA Step-Down Regulator With 2.5μA Quiescent Current And Integrated Diodes The LT3973 is an adjustable frequency monolithic buck switching regulator that accepts a wide input voltage range up to 42V,
LTC3838 Dual, Fast, Accurate Step- Down DC/DC Controller With Differential Output Sensing The LTC3838 is a dual, PolyPhase synchronous step-down DC/DC switching regulator controller. Two independent channels
LTC4415 Dual 4A Ideal Diodes With Adjustable Current Limit The LTC4415 contains two monolithic PowerPath ideal diodes, each capable of supplying up to 4A with typical forward conduction resistance of 50mΩ.