Digchip : Database on electronics components
Electronics components database



Details, datasheet, quote on part number: CSI 100-24V-24AH-AA-PEL
 
 
Part numberCSI 100-24V-24AH-AA-PEL
Category
Title100VA Portable 115V/60Hz Sinewave Inverter with built-in Battery and Charger
DescriptionThe Absopulse Electronics CSI 100-24V24AH-AA-PEL is a compact, portable inverter with built-in battery bank and charger, designed for operation in heavy-duty field-environments.

This 100VA inverter provides a regulated pure sine-wave output voltage of 115Vac continuous at 60Hz. The built-in battery charger section operates from all typical AC voltages worldwide, and provides 27.6V float voltage at 2A current to charge the 24V/24Ah battery bank. The charger can be kept on standby mode indefinitely, ensuring that the battery is continuously maintained. The battery bank, which contains two 12V/24Ah sealed lead acid batteries with fused terminals, provides a minimum of 3 hours backup power at full 100VA output, and up to 7 hours at reduced power. A depleted battery bank takes approximately 15 hours to reach full charge. This design can be customized to meet customer application requirements.

In addition, 24Vdc power can also be drawn directly from the battery at 6A maximum to run other 24Vdc input equipment such as small motors, pumps and DC-input instruments.

This inverter system is heavily ruggedized and conformal coated, and housed in a splash proof Pelican top loader case with a sturdy handle for easy portability in the field. It is convection cooled and operates over a 0oC to +50oC temperature range without de-rating. Extended temperature ranges are available.
CompanyAbsopulse Electronics
DatasheetDownload CSI 100-24V-24AH-AA-PEL datasheet
 
CSI 100-24V-24AH-AA-PEL photo


 
Specifications, Features, Applications
100VA Portable 115V/60Hz Sinewave Inverter with builtin Battery and Charger CSI 10024V24AHAAPEL

Rugged portable construction Convection cooled no fan Full electronic protection Fieldproven design topology

The CSI is a compact, portable inverter with builtin battery bank and charger is designed for operation in heavyduty fieldenvironments. The output is a pure sinewave voltage of 115Vac/0.85A/60Hz. The builtin battery charger operates from all typical AC voltages worldwide, and provides 27.6V float voltage at 2A current. The charger can be kept on standby mode indefinitely and the battery is therefore continuously maintained. The battery bank, which contains two 12V/24Ah batteries, has a builtin safety fuse and provides a minimum of 3 hours backup power at full 100VA output. Also, 24Vdc power can be drawn directly from the battery at 6A maximum, for other 24Vdc input equipment. The batteries take approximately 15 hours to reach full charge for a depleted battery. This inverter system is heavily ruggedized and conformal coated, and is housed in a splash proof Pelican top loader case with a sturdy handle for easy portability in the field. It is convection cooled and operates over to +50oC temperature range without derating. Extended temperature ranges are available. The cover must be kept open during operation and charging. Full electronic protection minimizes the possibility of failure due to abnormal operating conditions, including application errors. Generous design headroom and the use of designedin components with established reliability result in a high MTBF.

Charger Input Voltage 95264Vac universal 4763Hz Input Current: 1Arms max.

Charger Input Protection Inrush current limiting Varistor Internal safety fuse Battery safety fuse Lower voltage than the specified minimum input will not damage the unit

Recharge Time Approx. 15 hours for empty battery. The builtin charger provides float charging and can be kept on standby mode infinitely.

Output Overvoltage Protection 140V by internal supply voltage limiting
Indicators Charger ON LED visible through cooling slots

Control input None Alarm Outputs None on this model Dimensions x D) Pelican Top Loader Case x 9.7") Weight Approx kg (48 lbs.) including battery Connections Line Cord for AC input, Standard AC outlet for 115Vac Battery terminals for 24V output are available by using alligator clamps RoHS Compliance Fully compliant Warranty Two years subject to application within good engineering practice.

AC Output Voltage/Current 0.85A 100VA max. (continuous) The output is floating, either terminal can be grounded

Operating Temperature +50 C without derating. Extended temperature range available

Battery Dimensions x L) Two 12V24A or equivalent for x 127mm total x 5" total) Placed on the bottom of the Pelican case

Battery Voltage/Current The fused battery terminals are accessible 24Vdc/6A max
Battery Temp. Compensation Not available on this model

Wave Form (AC output) Sinusoidal Total Harmonic Distortion less than 5% at full load Backup time: 3 hours at 100VA load 7 hours at 50VA load

Temperature Drift o 0.05% per C over operating temperature range

Isolation (Charger Input 2250VDC input to chassis 4300VDC input to output 8mm spacing 500VDC output and battery to chassis

Line/Load Regulation (AC output) Maximum 2% from no load to full load
Environmental Protection Heavy ruggedizing Conformal coating
Output Noise (AC output) High frequency ripple is better than 500mVrms (20MHz BW)

Output Overload Protection Current limiting with short circuit protection. At 120VA the output goes into cycling protection mode.

MTBF at 45C Battery excluded Demonstrated MTBF is significantly higher

Enhancements to these general specifications and customizing can be accommodated upon request. Specifications are subject to change.

Designer and manufacturer of quality converters, inverters, UPS systems, complete rack mount systems and DCinput fluorescent lamp inverters since 1982. Custom or standard. Absopulse is a BABTapproved Facility ABOPULSE ELECTRONICS LTD 110 Walgreen Road, Ottawa, Ontario. K0A 1L0. CANADA. Tel: 8363511 | Fax: (613) 8367488 Email: absopulse@absopulse.com | http://www.absopulse.com For more information, please see: December 29, 2011/TS/CL Made in Canada http://www.absopulse.com/Absopulse_AC_DC_powersupplies_batterychargers.php




Some Part number from the same manufacture Absopulse Electronics
BAP 1K-U7712 The ABSOPULSE Electronics BAP 1K-U7712 series dc/dc converters generate up to 1kW output power with convection cooling. Housed in a compact, ruggedly constructed 173 x 173 x 314 mm chassis-mount enclosure,
W1043 Specifications: Frequency: 2.4GHz, 5GHz ; Number of Bands: 2 ; Mounting Type: Connector ; Packaging: Bulk ; VSWR: 2 ; Antenna Type: Whip: 1/4 Wave, Swivel, Tilt (Right Angle) ; Height (Max): - ; Termination:
W1010 Specifications: Frequency: 2.4GHz ; Number of Bands: 1 ; Mounting Type: Connector ; Packaging: Bulk ; VSWR: 2 ; Antenna Type: Whip: 1/4 Wave, Swivel, Tilt (Right Angle) ; Height (Max): 3.642" (109mm) ; Termination:
W1027 Specifications: Frequency: 2.4GHz ~ 2.5GHz ; Number of Bands: 1 ; Mounting Type: Connector ; Packaging: Bulk ; VSWR: 1.9 ; Antenna Type: Whip: 1/4 Wave, Swivel, Tilt (Right Angle) ; Height (Max): 5.913"
W1030
W1037
W1038
W1028 Specifications: Frequency: 5.15 ~ 5.85GHz ; Number of Bands: 1 ; Mounting Type: Connector ; Packaging: Bulk ; VSWR: 1.9 ; Antenna Type: Whip: 1/4 Wave, Swivel, Tilt (Right Angle) ; Height (Max): 5.913"
W1047 Specifications: Frequency: 900MHz ; Number of Bands: 1 ; Mounting Type: Connector ; Packaging: Bulk ; VSWR: - ; Antenna Type: Whip: 1/8 Whip: Swivel, Tilt (Right Angle) ; Height (Max): 8.0" (203.2mm) ; Termination:
W1063 Specifications: Frequency: 900MHz (868MHz ~ 928MHz) ; Number of Bands: 1 ; Mounting Type: Connector ; Packaging: Bulk ; VSWR: 2 ; Antenna Type: Whip: 1/8 Whip: Swivel, Tilt (Right Angle) ; Height (Max):
W3008 Specifications: Frequency: 2.4GHz ; Number of Bands: 1 ; Mounting Type: Surface Mount ; Packaging: Tape & Reel (TR) ; VSWR: - ; Antenna Type: Chip ; Height (Max): 0.04" (1.1mm) ; Termination: Surface
W4000D197 Specifications: Frequency: 1575.42MHz ; Number of Bands: 1 ; Mounting Type: Adhesive Tape ; Packaging: Bulk ; VSWR: 1.5 ; Antenna Type: Powered, Patch ; Height (Max): 0.21" (5.45mm) ; Termination: MMCX
W4000G197
W4000J197
W4000L197
W3000 Specifications: Frequency: 868MHz, 1.575GHz, 2.4GHz ; Number of Bands: 3 ; Mounting Type: Surface Mount ; Packaging: Tape & Reel (TR) ; VSWR: - ; Antenna Type: Chip ; Height (Max): 0.06" (1.6mm) ; Termination:
W3012 Specifications: Frequency: 902MHz ~ 928MHz ; Number of Bands: 1 ; Mounting Type: Surface Mount ; Packaging: Tape & Reel (TR) ; VSWR: - ; Antenna Type: Chip ; Height (Max): 0.157" (4mm) ; Termination:
W3013 Specifications: Frequency: 868MHz ~ 870MHz ; Number of Bands: 1 ; Mounting Type: Surface Mount ; Packaging: Tape & Reel (TR) ; VSWR: - ; Antenna Type: Chip ; Height (Max): 0.157" (4mm) ; Termination:
W3014 Specifications: Frequency: 880MHz ~ 960MHz ; Number of Bands: 1 ; Mounting Type: Surface Mount ; Packaging: Tape & Reel (TR) ; VSWR: - ; Antenna Type: Chip ; Height (Max): 0.059" (1.5mm) ; Termination:
W3016 Specifications: Frequency: 844MHz ~ 904MHz ; Number of Bands: 1 ; Mounting Type: Surface Mount ; Packaging: Tape & Reel (TR) ; VSWR: - ; Antenna Type: Chip ; Height (Max): 0.15" (4mm) ; Termination:
W3070 Specifications: Frequency: 880 ~ 960MHz, 1.71 ~ 1.88GHz ; Number of Bands: 2 ; Mounting Type: Surface Mount ; Packaging: Tape & Reel (TR) ; VSWR: - ; Antenna Type: Chip ; Height (Max): 0.07" (2.0mm)