Details, datasheet, quote on part number: TPS7A4700
| |
| Part number | TPS7A4700 |
| Category | |
| Title | Low Noise (3μVrms), 1A, High Voltage Low-Dropout Linear Regulator |
| Description | The TPS7A47 is a positive voltage (+36 V), ultralow-noise (4.17 µVRMS) linear regulator capable of sourcing a 1-A load.
In addition, the TPS7A47 output voltage is fully user-adjustable via a printed circuit board (PCB) layout without the need of external resistors or feed-forward capacitors, thus reducing overall component count.
The TPS7A47 is designed with bipolar technology primarily for high-accuracy, high-precision instrumentation applications where clean voltage rails are critical to maximize system performance. This feature makes the device ideal for powering operational amplifiers, analog-to-digital converters (ADCs), digital-to-analog converters (DACs), and other high-performance analog circuitry in critical applications (such as medical, RF, and test-and-measurement).
In addition, the TPS7A47 is ideal for post dc/dc converter regulation. By filtering out the output voltage ripple inherent to dc/dc switching conversions, maximum system performance is ensured in sensitive instrumentation, test-and-measurement, audio, and RF applications. |
| Company | Texas Instruments, Inc.
|
| |
|
 |
 |
| Some Part number from the same manufacture Texas Instruments, Inc. |
| DRV120 ACTIVE) PWM Solenoid Controller
The DRV120 is a PWM current driver for solenoids. It is designed to regulate the current with a well controlled waveform to guarantee activation and to reduce power dissipation |
| DRV2603 Haptic Driver With Auto Resonance Tracking For LRA And Optimized Drive For ERM
The DRV2603 is a haptic driver designed specifically to solve common obstacles in driving both Linear Resonance Actuator |
| DRV8806 2.0A Unipolar Stepper Motor Or 1A Quad Solenoid/Relay Driver With Open-Load Detection (Serial Ctrl)
The DRV8806 provides a 4-channel low side driver with overcurrent protection. It has built-in diodes |
| DRV8830 1A Low Voltage Brushed DC Motor Driver With Speed Regulation (I2C Ctrl)
The DRV8830 provides an integrated motor driver solution for battery-powered toys, printers, and other low-voltage or battery-powered |
| DRV8837 1.8A Low Voltage Brushed DC Motor Driver (PWM Ctrl)
The DRV8837 provides an integrated motor-driver solution for cameras, consumer products, toys, and other low-voltage or battery-powered motion-control |
| INA213 Voltage Output, High/Low-Side Measurement, Bi-Directional Zero-Drift Series Current Shunt Monitor
The INA210, INA211, INA212, INA213, and INA214 are voltage output current shunt monitors that can sense |
| INA827 Precision, G>5, 200uA, 2.7-V To 36-V Supply Instrumentation Amplifier
The INA827 is a low-cost instrumentation amplifier (INA) that offers extremely low power consumption and operates over a very wide |
| LMH6881 2.4GHz Programmable Differential Amplifier With Gain Control
The LMH6881 is a general purpose high performance differential amplifier with gain control. One of its main features is that it is very easy |
| LMH6882 2.4 GHz Dual Programmable Differential Amplifier With Gain Control
The LMH6882 is a general purpose high performance differential amplifier with gain control. One of its main features is that it is very |
| LMV601 General Purpose, Low Power CMOS Amplifier
The LMV601/LMV602/LMV604 are single, dual, and quad low voltage, low power Operational Amplifiers. They are designed specifically for low voltage general purpose |
| LMV602 |
| LMV604 |
| LMV611 Low Voltage, Low Power, RRIO General Purpose Amplifier
The LMV611/LMV612/LMV614 are single, dual, and quad low voltage, low power Operational Amplifiers. They are designed specifically for low voltage |
| LMV612 |
| LMV614 |
| LMV762Q Low Voltage, Precision Comparator With Push-Pull Output
The LMV761/LMV762/LMV762Q are precision comparators intended for applications requiring low noise and low input offset voltage. The LMV761 single |
| OPA4188 0.03µV/C, Low Noise, Rail-to-Rail Output, 36V Zero-Drift Operational Amplifier
The OPA4188 operational amplifier uses TI proprietary auto-zeroing techniques to provide low offset voltage (25 µV, max), |
| OPA4350-DIE High-Speed, Single-Supply, Rail-to-Rail Operational Amplifiers MicroAmplifier(TM) Series
The OPA4350 rail-to-rail CMOS operational amplifier is optimized for low voltage, single-supply operation. Rail-to-rail |
| PGA308-DIE Single-Supply, Auto-Zero Sensor Amplifier With Programmable Gain And Offset.
The PGA308 is a programmable analog sensor signal conditioner. The analog signal path amplifies the sensor signal and provides |
| THS3001-DIE 420-MHz High-Speed Current-Feedback Amplifiers
The THS3001 is a high-speed current-feedback operational amplifier, ideal for communication, imaging, and high-quality video applications. This device offers |
| TLV3202 Dual, 40ns, MicroPower, Rail-to-Rail Input Comparator With Push-pull Outputs
The TLV3201 and TLV3202 are single- and dual-channel comparators that offer the ultimate combination of high-speed (40 ns) and low-power |
|
