Details, datasheet, quote on part number: ISL72813SEH
PartISL72813SEH
Category
TitleRad Hard 32-Channel Driver with Integrated Decoder for Satellite Applications
DescriptionThe ISL72813SEH is a radiation hardened, high-voltage, high-current, driver circuit fabricated using Intersils proprietary PR40 silicon-on-insulator process technology to mitigate single-event effects. This device integrates 32 driver circuits that feature high-voltage, common emitter, and open-collector outputs with a 42V breakdown voltage and a peak current rating of 600mA.

To further reduce solution size and increase system power density, the ISL72813SEH integrates a 5-bit to 32-channel decoder (plus enable pin) as well as level shifting circuitry to reference the output of the decoder to a negative voltage. This conveniently allows the user to select 1 of 32 available driver channels. The inputs to the decoder are TTL/CMOS compatible, allowing easy interface to CPUs, FPGAs, or μprocessors.

The ISL72813SEH operates across the military temperature range from -55C to +125C and is available in a 44 Ld hermetically sealed Ceramic Lead-Less Chip Carrier (CLCC) package.
CompanyIntersil Corporation
DatasheetDownload ISL72813SEH datasheet
  
ISL72813SEH photo

 

Features, Applications

The is a radiation hardened, high-voltage, high-current, driver circuit fabricated using Intersil's proprietary PR40 silicon-on-insulator process technology to mitigate single-event effects. This device integrates 32 driver circuits that feature high-voltage, common emitter, and open-collector outputs with a 42V breakdown voltage and a peak current rating 600mA. To further reduce solution size and increase system power density, the ISL72813SEH integrates to 32-channel decoder (plus enable pin) as well as level shifting circuitry to reference the output of the decoder to a negative voltage. This conveniently allows the user to select of 32 available driver channels. The inputs to the decoder are TTL/CMOS compatible, allowing easy interface to CPUs, FPGAs, or processors. The ISL72813SEH operates across the military temperature range from to +125C and is available 44 Ld hermetically sealed Ceramic Lead-Less Chip Carrier (CLCC) package.

Features

Electrically screened to SMD 5962-17208 Acceptance tested to 100krad(Si) (HDR) and to 50krad(Si) (LDR) wafer-by-wafer Integrated to 32-channel decoder Integrated level shifting circuit High collector current outputs High voltage outputs Grounded metal lid Full military temperature range operation to +150C Radiation tolerance - HDR 100krad(Si) - LDR (0.01rad(Si)/s). 50krad(Si) SEE hardness - No SEB/SEL LETTH, VCE 33V. 86.4MeVcm2/mg

For a full list of related documents, visit our website - ISL72813SEH product page
Applications
Waveguide switches and coaxial switches Relays Line drivers Logic buffers Lamp drivers

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-468-3774 | Copyright Intersil Americas LLC 2017. All Rights Reserved Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries. All other trademarks mentioned are the property of their respective owners.

FIGURE 3. FUNCTIONAL BLOCK DIAGRAM (Complementary Darlington)

ORDERING SMD NUMBER (Note 1) 5962R1720801VXA N/A 5962R1720801V9A N/A NOTES: 1. Specifications for Rad Hard QML devices are controlled by the Defense Logistics Agency Land and Maritime (DLA). The SMD numbers must be used when ordering. 2. These Intersil Pb-free Hermetic packaged products employ 100% Au plate - e4 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations. 3. The /PROTO and /SAMPLE are not rated or certified for Total Ionizing Dose (TID) or Single Event Effect (SEE) immunity. These parts are intended for engineering evaluation purposes only. The /PROTO parts meet the electrical limits and conditions across the temperature range specified in the DLA SMD and are in the same form and fit as the qualified device. The /SAMPLE die is capable of meeting the electrical limits and conditions specified in the DLA SMD at +25C only. The /SAMPLE is a die and does not receive 100% screening across the temperature range to the DLA SMD electrical limits. These part types do not come with a certificate of conformance because there is no radiation assurance testing and they are not DLA qualified devices. 4. Evaluation board uses the /PROTO parts. The /PROTO parts are not rated or certified for Total Ionizing Dose (TID) or Single Event Effect (SEE) immunity. PART NUMBER (Note ISL72813SEHVL ISL72813SEHL/PROTO, (Note ISL72813SEHVX ISL72813SEHX/SAMPLE, (Note 3) ISL72813SEHEV1Z (Note 4) TEMPERATURE RANGE (C) to +125 Evaluation Board PACKAGE (RoHS COMPLIANT) 44 Ld CLCC 44 Ld CLCC Die PACKAGE DRAWING J44.A

PIN NUMBER LID PIN NAME VEE Ax EN GND VCC N/A ESD CIRCUIT Circuit 3 Circuit 2 Circuit 1 Circuit 1 Circuit 3 Circuit 3 N/A Common emitter of all 32 channels. Channels 0 through 31 collector output. Address lines for the decoder. Active high enable input to the decoder. Supply ground. Connect this pin to the PCB ground plane. Bias supply for the decoder and the level shift circuit, connect to 5V. Package Lid is internally connected to GND.

DESCRIPTION

 

Some Part number from the same manufacture Intersil Corporation
24502BVA 1024 X 4 CMOS RAM
29102BJA 2k X 8 CMOS RAM
29103BRA 16k X 1 Asynchronous CMOS Static RAM
29104BJA 2k X 8 Asynchronous CMOS Static RAM
29109BRA 16k X 1 Asynchronous CMOS Static RAM
29110BJA 2k X 8 Asynchronous CMOS Static RAM
2N6790 3.5a, 200v, 0.800 Ohms, N-channel Power MOSFET: 200v, 3.5a
2N6796 8A, 100V, 0.180 Ohm, N-channel Power MOSFET
2N6975 5a, 400v And 500v N-channel Igbts
2N6976
2N6977
2N6978
2N7288D Radiation Hardened N-channel Power MOSFETs
5962-85016013A CMOS Priority Interrupt Controller
5962-8501601YA
5962-85016023A
5962-8501602YA
5962-85528012A CMOS Bus Arbiter
5962-8552801RA
5962-8601601QA CMOS 8/16-bit Microprocessor
5962-8601601XA
Same catergory

CMX641A : Dual SPM/SecurityDetector/Generator . Two (12kHz/16kHz) SPM Detectors Selectable 12kHz/16kHz ASK Generator Selectable Tone Follower or Packet Mode 3-State Outputs Excellent Speech-Band Rejection Hardwired Control for Non-C Systems Selectable Bandwidth Limits and Stable Centre Frequency from a Standard Xtal Applications SPM for Pair-Gain Systems Payphone Security Applications Call Charge.

IRF3711ZCL : 20V Single N-channel HexFET Power MOSFET in a TO-262 Package. Applications l High Frequency Synchronous Buck Converters for Computer Processor Power Benefits l Low RDS(on) at 4.5V VGS l Ultra-Low Gate Impedance l Fully Characterized Avalanche Voltage and Current VDS VGS = 100C IDM PD @TC 25C PD @TC 100C TJ TSTG Drain-to-Source Voltage Gate-to-Source Voltage Continuous Drain Current, VGS @ 10V Continuous Drain.

S1R72003 : USB20 Device Controller.

AST31P1E : CIT Switch. S Electrical Ratings Electrical Life Contact Resistance Dielectric Strength Insulation Resistance Operating Temperature Storage Temperature @ 250VAC See Contact Options 30,000 cycles typical 20 m max initial 100mA 1500Vrms min > 100M min to 85C Actuator Housing Support Bracket Contacts Terminals Brass, Chrome Plated 4/6 Nylon, Glass Filled, Flame.

311100000 : Thumbwheel Switches. /Benefits Most complete product offering in the industry Spacers available to fit most panel cutouts Front or rear mounting options Typical Applications Test & measurement equipment Industrial equipment Computer devices s CONTACT RATING: CARRY: 1 AMP continuous. SWITCH: 100 mA max. OPERATING VOLTAGE: 120 V AC. ELECTRICAL LIFE: 100,000 actuations. CONTACT.

AV06XX-XX : Av/af06 Attenuator.

BF37931E : Single Phase Moulded Bridges 0,8 AMP TO 1,5 AMP.

831370C3.W : MICRO SWITCH, SIDE ROTARY, SPDT, 5A 250V. s: Contact Configuration: - ; Microswitch Type: Miniature ; Actuator Style: Side Rotary ; Switch Operation: - ; Operating Force Max: 0.12N-cm ; Contact Voltage AC Nom: 250V ; Contact Voltage DC Nom: - ; Contact Current Max: 5A ; Switch Terminals: Quick Connect.

KAB-30 : SEMICONDUCTOR FUSE. s: Voltage Rating VDC: - ; Voltage Rating VAC: - ; Fuse Current: - ; Fuse Size Code: - ; Fuse Size Imperial: - ; Fuse Size Metric: - ; Series: - ; Blow Characteristic: -.

1536405 : Round Accessory Industrial Controls, Meter; CBL 4POS M12 R/A SOCKT-WIRE 1.5M. s: Cable Type: Round ; Connector Type: Circular 04 pos Female, Right Angle to Wire Leads ; Length: 4.92' (1.50m) ; Color: Black ; Usage: Panel Mount, Industrial ; Shielding: Unshielded ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

R-78HB3.3-0.5 : DC/DC Converters & Regulators 0.5A DC/DC REG 9-72Vin 3.3Vout. RECOM Power's Innoline non-isolated R-78 Series DC/DC Converters offer efficiency up to 97%, eliminating the need for heatsinks. These high efficiency regulators are highly suited to replace the LM78 Series linear regulators and are pin-out compatible with LM78XX linears. The high efficiency.

103168-9 : Gold Through Hole Rectangular - Headers, Male Pin Connectors, Interconnect Header, Shrouded; CONN HEADER VERT .100 22POS 30AU. s: Color: Black ; Connector Type: Header, Shrouded ; Contact Finish: Gold ; Contact Mating Length: 0.318" (8.08mm) ; : - ; Mounting Type: Through Hole ; Number of Positions Loaded: All ; Number of Rows: 2 ; Pitch: 0.100" (2.54mm).

74407000082 : Fixed Inductors, Coils, Choke 820nH 6A 0.315" L x 0.315" W x 0.071" H (8.00mm x 8.00mm x 1.80mm) -; INDUCTOR POWER .82UH 6.0A SMD. s: Inductance: 820nH ; Tolerance: 30% ; Package / Case: 0.315" L x 0.315" W x 0.071" H (8.00mm x 8.00mm x 1.80mm) ; Packaging: Cut Tape (CT) ; Type: - ; Current: 6A ; Mounting Type: Surface Mount ; Q @ Freq: - ; Frequency.

5-104550-7 : Gold Surface Mount Board To Board - Headers, Receptacles, Female Socket Connectors, Interconnect Receptacle; CONN RECEPT 60POS .050" GOLD SMD. s: Color: Black ; Connector Type: Receptacle ; Contact Finish: Gold ; Contact Finish Thickness: 30in (0.76m) ; : Board Lock ; Height Above Board: 0.370" (9.40mm) ; Height Stacking (Mating): 0.470", 0.515" (11.94mm,.

MFR-25FBF-12R4 : 12.4 Ohm 0.25W, 1/4W Through Hole Resistors; RES 12.4 OHM 1/4W 1% METAL FILM. s: Resistance (Ohms): 12.4 ; Power (Watts): 0.25W, 1/4W ; Tolerance: 1% ; Packaging: Bulk ; Composition: Metal Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

RT0805CRE07147KL : 147K Ohm 0.125W, 1/8W Chip Resistor - Surface Mount; RES 147K OHM 1/8W .25% SMD 0805. s: Resistance (Ohms): 147K ; Power (Watts): 0.125W, 1/8W ; Tolerance: 0.25% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: 50ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

A22L-HY-24A-11A : DPST (1-NO, 1-NC) Pushbutton Switch On-Off, Off-On 10A (AC/DC); SWITCH PUSH DPST 10A 110V. s: Type: Standard, Illuminated ; Circuit: DPST (1-NO, 1-NC) ; Switch Function: On-Off, Off-On ; Current Rating: 10A (AC/DC) ; Voltage Rating - AC: 110V ; Voltage Rating - DC: 24V ; Actuator Type: Round, Button, Half Guard ; Color - Actuator/Cap: Yellow ; Illumination.

A15339-01 : Thermal - Pads, Sheet Fans, Thermal Management; TFLEX 3190 9" X 9". s: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

LCA : CAPACITOR, CERAMIC, MULTILAYER, 50; 100; 200 V, THROUGH HOLE MOUNT, 0402. s: Configuration / Form Factor: Leaded Capacitor ; Technology: Multilayer ; Dielectric: Ceramic Composition ; Mounting Style: Through Hole ; EIA Case Size: 0402 ; Operating Temperature: -67 to 257 F (218 to 398 K).

 
0-C     D-L     M-R     S-Z