Details, datasheet, quote on part number: MIKROE-1715
PartMIKROE-1715
Category
TitleRF TXRX MOD BLUETOOTH TRACE ANT
Description

With the range up to a 100 meters and low power consumption, MikroElektronika's Bluetooth click is a great solution if users are looking for a simple way to integrate Bluetooth 2.1 communication to the device. It features the RN-41 low power, class 1 Bluetooth radio module. Bluetooth click communicates with the target board MCU via a UART interface and runs on 3.3 V power supply only. The RN-41 Class 1 Bluetooth radio module delivers up to a 3 Mbps data rate, for distances up to 100 meters (class 1 radio). Bluetooth 2.1 + EDR version includes sniff subrating, a feature that significantly increases battery life for devices that have long periods in idle mode, like home sensor networks, headsets, and more. The host can specify maximum transmit and receive latencies so that a device knows how often in a cycle it needs to enter sniff mode. The average power consumption in normal mode is 30 mA, 8 mA in low-power sniff mode, and only 2.5 mA in stand-by mode. Low power consumption and high data rates make this click the best choice in barcode scanners, measurement and monitoring systems, industrial sensors and controls, medical devices, asset tracking, and more. MikroElektronika's BLE2 click features the RN4020 module from Microchip, which integrates RF, a baseband controller, and a command API processor, making it a complete Bluetooth low energy (BLE) solution. The click communicates with the target board MCU through mikroBUS™ RX, TX and AN (CMD), PWM (con.), and RST (wake) lines. The BLE2 runs on a 3.3 V power supply.  The RN4020 has Microchip’s Low-energy Data Profile (MLDP), which enables an asynchronous serial data connection between two RN4020 devices (which could be two BLE2 clicks). The module can be remotely controlled or updated over-the-air by another module over a secure connection or can be controlled or updated through its UART interface. The RN4020 module aboard BLE2 click incorporates a PCB antenna with a range of at least 30 m.



CompanymikroElektronika
DatasheetDownload MIKROE-1715 datasheet
  
MIKROE-1715 photo

Others parts numbering
MIKROE-958: RF TXRX MODULE BLUETOOTH
RN4020-V/RM123
RN4020-V/RM120
RN4020-V/RM
RN41-I/RM: RF TXRX MOD BLUETOOTH CHIP ANT
RN41-I/RM630: BLUETOOTH 3.0+ EDR CLASS 1 MODUL
RN41SM-I/RM: RF TXRX MOD BLUETOOTH CHIP ANT
RN4020BCN-V/RM120: MODULE BLUETOOTH 4.1 W/ANT

 

Features, Applications
Features

Fully certified Bluetooth« version 4.1 module On-board Bluetooth Low Energy 4.1 stack ASCII command interface API over UART Device Firmware Upgrade (DFU) over UART or Over the Air (OTA) Microchip Low-energy Data Profile (MLDP) for serial data applications Remote commands over-the-air 64 KB internal flash Compact form factor: 2.5 mm Castellated SMT pads for easy and reliable PCB mounting Environmentally friendly, RoHS compliant Certifications: FCC, IC, CE, QDID, VCCI, KCC, and NCC

Applications

Health/Medical Devices - Glucose meters - Heart rate - Scale Sports Activity and Fitness - Pedometer - Cycling computer - Heart rate Retail - Point of Sale (POS) - Asset tagging and tracking - Proximity advertising Beacon Applications Internet of Things (IoT) Sensor tag Remote Control - Embedded Device Control - AV consoles and game controllers Wearable Smart Devices and Accessories Industrial Control - Private (custom) services - Low bandwidth cable replacement Smart Energy/Smart Home

Single operating voltage: 3.6V (3.3V typical) Temperature range: to 85░C Low-power consumption Simple, UART interface Integrated Crystal, I2C Interface, Internal Voltage Regulator, Matching Circuitry, and PCB Antenna Multiple IOs for control and status GPIO, ADC Three Pulse Width Modulation (PWM) outputs

ISM Band to 2.480 GHz operation Channels 0-39 RX Sensitivity: -92.5 dBm at 0.1% BER TX Power: -19.0 dBm to +7.5 dBm RSSI Monitor

Secure AES128 encryption GAP, GATT, SM, L2CAP, and integrated public profiles Create custom services using command API Keyboard I/O Authentication Software configurable role as peripheral or central and client or server Built-in scripting capabilities for hostless operation

Description

Microchip's RN4020 Bluetooth Low Energy Module provides a highly integrated solution for delivering low-power Bluetooth 4.1 solutions. The advanced command interface offers rapid time to market. The RN4020 module complies with Bluetooth specification version 4.1. The module integrates RF, a baseband controller, and a command API processor, making it a complete Bluetooth Low Energy solution. The RN4020 can be used with ultra-low cost microcontroller for intelligent Bluetooth Low Energy applications. For simple sensor applications, the RN4020 internal scripting capabilities enable basic functions to be implemented without the need for external host MCU or software development tools.

1.0 Device Overview........................................................................................................................................................................... 3 2.0 General Specifications.................................................................................................................................................................. 6 3.0 Microcontroller to RN4020 Interface............................................................................................................................................. 7 4.0 Physical Dimensions.................................................................................................................................................................... 8 5.0 Typical Application Schematic.................................................................................................................................................... 11 6.0 ASCII Command API.................................................................................................................................................................. 12 7.0 Supported Services.................................................................................................................................................................... 13 8.0 Regulatory Approval................................................................................................................................................................... 15 9.0 Ordering Information................................................................................................................................................................... 21 Appendix A: Revision History............................................................................................................................................................... 23 The Microchip Web Site....................................................................................................................................................................... 25 Customer Change Notification Service................................................................................................................................................ 25 Customer Support................................................................................................................................................................................ 25

It is our intention to provide our valued customers with the best documentation possible to ensure successful use of your Microchip products. To this end, we will continue to improve our publications to better suit your needs. Our publications will be refined and enhanced as new volumes and updates are introduced. If you have any questions or comments regarding this publication, please contact the Marketing Communications Department via E-mail at docerrors@microchip.com. We welcome your feedback.

To obtain the most up-to-date version of this data sheet, please register at our Worldwide Web site at: http://www.microchip.com You can determine the version of a data sheet by examining its literature number found on the bottom outside corner of any page. The last character of the literature number is the version number, (e.g., DS30000000A is version A of document DS30000000).

An errata sheet, describing minor operational differences from the data sheet and recommended workarounds, may exist for current devices. As device/documentation issues become known to us, we will publish an errata sheet. The errata will specify the revision of silicon and revision of document to which it applies. To determine if an errata sheet exists for a particular device, please check with one of the following: Microchip's Worldwide Web site; http://www.microchip.com Your local Microchip sales office (see last page) When contacting a sales office, please specify which device, revision of silicon and data sheet (include literature number) you are using.

Register on our web site at www.microchip.com to receive the most current information on all of our products.

The RN4020 Bluetooth Low Energy RF module integrates Bluetooth 4.1 radio baseband, MCU, digital analog I/O, on-board stack, and ASCII command API. Figure 1-1 shows the top view of the module. The pinout of the module is shown in Figure 1-2, and the description is presented in Table 1-1. Figure 1-3 lists all the key components of the module.

UART Radio 64KB serial Flash for User profiles and scripts
BTLE v 4.1 Core with BT SIG Certified Firmware GATT/GAP

 

Some Part number from the same manufacture mikroElektronika
MIKROE-958

With the range up to a 100 meters and low power consumption, MikroElektronika's Bluetooth click is a great solution if users are looking for a simple way to integrate Bluetooth 2.1 communication to the device.

Same catergory

1N5408 : Pakage = DO-201AD ;; Max. Reverse Voltage VRM (V)= 1000 ;; Max. Aver. Rect. Current io (A)= 3 ;; Ifsm (A)= 200.

74ABT125 : 74ABT125; Quad Buffer (3-State);; Package: SOT108-1 (SO14), SOT27-1 (DIP14), SOT337-1 (SSOP14), SOT402-1 (TSSOP14).

MPC973 : Clock Circuits. Low Voltage PLL Clock Driver. The MPC972/973 are 3.3V compatible, PLL based clock driver devices targeted for high performance CISC or RISC processor based systems. With output frequencies to 125MHz and skews of 550ps the MPC972/973 are ideally suited for most synchronous systems. The devices offer twelve low skew outputs plus a feedback and sync output for added flexibility and ease.

CX11656-11 : Home Networking Physical Layer Device with Integrated Analog Front End Circuitry Data Sheet (preliminary).

UM3161AG : Simple Melody Generator.

DRS4110 : Subminiature Code Switches.

34473C : Shielded Surface Mount Inductors. RoHS compliant Inductance range from to 1mH Small footprint Ultra-low profile UL 94V-0 packaging materials Tape & reel J-STD-020C reflow Custom inductance values available The 3400 series is a range of bobbin-wound, shielded inductors. They are suitable for powerline filtering found in consumer electronics such as desktop computers, handheld devices.

S0784440 : LABEL PRINTER, LM 210D QWERTY UK. About Your New Label Maker. 5 Product Registration.5 Getting Started 5 Connecting the Power5 Inserting the Batteries.5 Connecting the Optional Power Adapter.6 Inserting the Tape Cassette.6 Using the Label Maker for the First Time. 7 Getting to Know the Label Maker. 7 Power.7 LCD Insert.8 Settings.8 CAPS Mode.8 Num Backspace9 Clear9 Navigation Keys9.

RTV670810.10ZCLR : SILICONE 1 PART ADHESIVE, CARTRIDGE. s: Sealant Type: Silicone ; Series: - ; Sealant Applications: Electronics ; Dispensing Method: Cartridge ; Chemical Color: Transparent ; Volume: 10.1fl.oz. (US) ; Weight: -.

M1RXK-5040K : Plug to Cable Rectangular Cable Assembly 3.34' (1.02m) Polarizing Key, Strain Relief; IDC CABLE - MPR50K/MC50F/X. s: Connector Type: Plug to Cable ; Number of Positions: 50 ; Contact Finish: Gold ; Number of Rows: 2 ; : Polarizing Key, Strain Relief ; Color: Multiple, Twisted Pair (Flat) ; Length: 3.34' (1.02m) ; Usage: - ; Shielding: Unshielded ; Contact.

FI-X30HL : Free Hanging (In-Line) Rectangular - Housing Connectors, Interconnect Male Pin; CONN PLUG HSNG LEVER 1MM 30POS. s: Color: - ; Contact Termination: Crimp ; Contact Type: Male Pin ; Mounting Type: Free Hanging (In-Line) ; Number of Rows: 1 ; Pitch: 0.039" (1.00mm) ; Packaging: Bulk ; Connector Type: Plug ; Fastening Type: Latch Lock ; : - ; Number of Positions:.

OCP-PCT218/E : Optoisolator - Transistor, Photovoltaic Output Channel Through Hole 8-DIP (0.300", 7.62mm); OPTOCOUPLER 2-CH TRANS OUT 8DIP. s: Voltage - Isolation: 5000Vrms ; Input Type: DC ; Output Type: Transistor ; Current - Output / Channel: 50mA ; Voltage - Output: 60V ; Vce Saturation (Max): 300mV ; Current Transfer Ratio (Min): 60% @ 2mA ; Mounting Type: Through.

RMCF1210FT80R6 : 80.6 Ohm 0.333W, 1/3W Chip Resistor - Surface Mount; RES 80.6 OHM 1/3W 1% 1210 SMD. s: Resistance (Ohms): 80.6 ; Power (Watts): 0.333W, 1/3W ; Tolerance: ▒1% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: ▒100ppm/░C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

TNPW2010232RBETF : 232 Ohm 0.4W Chip Resistor - Surface Mount; RES 232 OHM .40W 0.1% 2010. s: Resistance (Ohms): 232 ; Power (Watts): 0.4W ; Tolerance: ▒0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: ▒25ppm/░C ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant.

03028-BP102WFM-B : CAPACITOR, CERAMIC, MULTILAYER, 6.3 V, BP, 0.001 uF, SURFACE MOUNT, 0603. s: Configuration / Form Factor: Chip Capacitor ; Technology: Multilayer ; Dielectric: Ceramic Composition ; RoHS Compliant: Yes ; Capacitance Range: 1.00E-3 microF ; Capacitance Tolerance: 1 (+/- %) ; WVDC: 6.3 volts ; Temperature Coefficient: 30 ppm/┬░C ; Mounting Style: Surface.

DEA351453LT-1047 : CERAMIC LPF. s: Filter Type: Low Pass ; Filter Design: Ceramic Filter.

QT78N-1-133.000MHZ : CRYSTAL OSCILLATOR, CLOCK, 133 MHz, LVHCMOS OUTPUT. s: Oscillator Type: XO ; Package / Form Factor: Surface Mount ; / Standards: RoHS, Lead-Free ; Frequency: 133 MHz ; Operating Temperature: 0 to 70 C (32 to 158 F) ; Supply Voltage: 2.5 V ; Output Type: LVHCMOS.

SR121A221KAR : CAPACITOR, CERAMIC, MULTILAYER, 100 V, C0G, 0.00022 uF, THROUGH HOLE MOUNT. s: Configuration / Form Factor: Leaded Capacitor ; Technology: Multilayer ; Dielectric: Ceramic Composition ; RoHS Compliant: Yes ; Capacitance Range: 2.20E-4 microF ; Capacitance Tolerance: 10 (+/- %) ; WVDC: 100 volts ; Temperature Coefficient: 30 ppm/┬░C ; Mounting Style:.

 
0-C     D-L     M-R     S-Z