Details, datasheet, quote on part number: SKY13592-689LF
PartSKY13592-689LF
Category
TitleRF Switch ICs 1-6GHz SPDT IL .45dB Hi Iso 35dB
Description

Skyworks SKY13592-689LF Single-Pole Double-Throw Switch is for mode switching in WLAN applications and uses advanced switching technologies to maintain low insertion loss and high isolation for all switching paths. The switch has high-linearity performance, making it an ideal choice for low-power transmit/receive applications. The SKY13592-689LF has integrated DC blocking capacitors with no external DC blocking capacitors required. The switch is manufactured in a compact, 1󪻐.5 mm, 6-pin exposed pad plastic Micro Lead-frame Package Dual (MLPD) package.



CompanySkyworks Solutions, Inc.
DatasheetDownload SKY13592-689LF datasheet
  
SKY13592-689LF photo

Others parts numbering
SKY13592-689LF-EVB: RF Development Tools 1-6GHz SPDT Eval Board

 

Features, Applications

Applications

WLAN 802.11 a/b/g/n/ac networks WLAN repeaters ISM band radios Low power transmit receive systems Smartphones Connectivity modules

Features

Broadband frequency range: to 6.0 GHz Low insertion loss, 0.45 dB typical @ 2.45 GHz High isolation, 35 dB typical @ 2.45 GHz Excellent linearity performance, = +30 dBm Integrated DC blocking capacitors Ultra-miniature, MLPD (6-pin, mm) package 260 C per JEDEC J-STD-020)

Description

The is a single-pole, double-throw (SPDT) switch intended for mode switching in WLAN applications. Using advanced switching technologies, the SKY13592-689LF maintains low insertion loss and high isolation for all switching paths. The high-linearity performance and low insertion loss achieved by the switch make it an ideal choice for low-power transmit/receive applications. Depending on the logic voltage applied to the control pins (VCTL), the INPUT pin is connected to one of the two switched RF outputs or OUTPUT2) using a low insertion loss path, while the path between the INPUT pin and the other OUTPUT pin in a high-isolation state. The switch is "reflective short" on the isolated port. The SKY13592-689LF has integrated DC blocking capacitors, so no external DC blocking capacitors are required. The switch is manufactured in a compact, mm, 6-pin exposed pad plastic Micro Lead-frame Package Dual (MLPD) package. A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1.

Skyworks GreenTM products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of GreenTM, document number SQ040074.

Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com

203513E Skyworks Proprietary and Confidential Information Products and Product Information are Subject to Change Without Notice May 2016 1

Pin 2 3 Name OUTPUT1 GND OUTPUT2 RF port. Ground RF port. Description Pin 6 VCTL2 INPUT VCTL1 Name Description DC control voltage 2 RF port. DC control voltage 1

The absolute maximum ratings of the SKY13592-689LF are provided in Table 2. The recommended operating conditions are specified in Table 3, and electrical specifications are provided in Table 4. The state of the SKY13592-689LF is determined by the logic provided in Table 5. Typical performance characteristics are shown in Figures 3 through 6.

Parameter Input power Control voltage Storage temperature Operating temperature PIN VCTL TSTG TOP -65 -40 Symbol Minimum Maximum Units dBm V C

1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.

ESD HANDLING: Although this device is designed be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industrystandard ESD handling precautions should be used at all times.

Parameter Operating frequency Control voltage: Low High Operating temperature fo VCTL_L VCTL_H TOP Symbol Minimum Typical Maximum 0.4 3.6 Units GHz V C

2 May 24, 2016 Skyworks Proprietary and Confidential Information Products and Product Information are Subject to Change Without Notice 203513E

Table 4. SKY13592-689LF Electrical Specifications1 (VCTL 0 V and 3.3 V, TOP +25 C, PIN = 0 dBm, Characteristic Impedance [ZO] 50 , Unless Otherwise Noted)

Parameter Insertion loss Isolation (INPUT to OUTPUT1/OUTPUT2) Isolation to OUTPUT2) Return loss P0.1dB compression point Harmonics Symbol IL ISO to 2.5 GHz to 6.0 GHz to 2.5 GHz to 6.0 GHz to 2.5 GHz to 6.0 GHz to 2.5 GHz to 6.0 GHz to 6 GHz fo =2.4 GHz, PIN = +24 dBm, 50 , VCTL = 5.8 GHz, PIN = +21 dBm, 50 , VCTL = 2.4 GHz, PIN = +24 dBm, 50 , VCTL = 5.8 GHz, PIN = +21 dBm, 50 , VCTL 3.3 V Input IP3 PIN = +20 dBm/tone: = 2.4 GHz = 5.8 GHz Error vector magnitude EVM 802.11g, 54 Mbps, PIN = +25.5 dBm, 2.45 GHz 802.11g, 54 Mbps, PIN = +25.5 dBm, 5.8 GHz 802.11g, 54 Mbps, PIN = +21 dBm, 5.8 GHz 50% VCTL 90%/10% RF ICTL VCTL 3.3 V dBm ns A Test Condition Minimum Typical Maximum 0.65 0.8 Units dB dBm

Switching speed Rise/fall time Control current
1 Performance is guaranteed only under the conditions listed in this table.

1 "1" indicates VCTL V. "0" indicates VCTL 0.4 V. Any state other than described in this table places the switch into an undefined state. An undefined state will not damage the device.

203513E Skyworks Proprietary and Confidential Information Products and Product Information are Subject to Change Without Notice May 2016 3


 

Some Part number from the same manufacture Skyworks Solutions, Inc.
SKY13592-689LF-EVB

Skyworks SKY13592-689LF Single-Pole Double-Throw Switch is for mode switching in WLAN applications and uses advanced switching technologies to maintain low insertion loss and high isolation for all switching

 
0-C     D-L     M-R     S-Z