Details, datasheet, quote on part number: STEVAL-ISA198V1
PartSTEVAL-ISA198V1
CategoryEmbedded Solutions => Engineering Tools => Power Management IC Development Tools => 8826604
TitlePower Management IC Development Tools 2 A step down DC - DC switching regulator (VIN = 4.5 V to 60 V) based on the L7987L
Description

STMicroelectronics STEVAL-ISA198V1 Evaluation Board is a step-down switching power supply based on the L7987L regulator with a 4.5-60V input voltage. The output voltage can be set starting from 0.8V. Low drop-out operation can be achieved due to the advanced integrated switch management. The L7987L is a 61V, 2A step-down asynchronous switching regulator with embedded power MOSFET capable of delivering up to 2A of current, depending on the application conditions.

CompanyST Microelectronics, Inc.
DatasheetDownload STEVAL-ISA198V1 datasheet
Specifications 
Product CategoryPower Management IC Development Tools
ManufacturerSTMicroelectronics
ProductEvaluation Boards
TypeVoltage Regulators - Switching Regulators
Tool Is For Evaluation OfL7987L
Input Voltage4.5 V to 60 V
Output Voltage5 V
BrandSTMicroelectronics
Output Current2 A
SeriesL7987L
STEVAL-ISA198V1 photo

 

Features, Applications
2 A step down - DC switching regulator (VIN 60 V) based on the L7987L
Description

The STEVAL-ISA198V1 product evaluation board is a step-down switching power supply based on the L7987L regulator an HTSSOP16 package. The output voltage can be set starting from 0.8 V. Low drop-out operation, due to the advanced integrated switch management, can be achieved. The 2 A step-down asynchronous switching regulator with embedded power MOSFET capable of delivering A of current, depending on the application conditions. The embedded switch-over feature on the VBIAS pin and the light load management (pulse skipping) help maximize power conversion efficiency across the entire load range.

Features

60 V input voltage Step-down (buck) conversion 5 V output voltage (VIN A DC output current 500 kHz switching frequency 5 ms programmed soft-start Compliant with ceramic output capacitors 180 out of phase synchronization available Auto recovery overcurrent and thermal protection RoHS compliant

The soft-start, current limit threshold and switching frequency are adjustable for application optimization. The device includes an internal 250 kHz oscillator that can be externally adjusted to 1.5 MHz; two L7987L regulators can be synchronized a 180 out-of-phase configuration for reduced total input RMS current.

For further information contact your local STMicroelectronics sales office


Table 1: Document revision history Date 11-Nov-2016 Version 1 Initial release. Changes

 

Some Part number from the same manufacture ST Microelectronics, Inc.
1.5KE Transils
1.5KE320P
1.5KE33A
1.5KE6V8 Transil(tm)
1.5KE6V8A Transils
1.5KE6V8CP Transil(tm)
1.5KE7V5A Transils
1134-5 RF & Microwave Transistors VHF Portable/mobile Applications
1135-3
1224-10 RF & Microwave Transistors HF SSB Applications
1528-6 RF & Microwave Transistors Avionics Applications
1530-1
1534-1
1538-8
18W Power Desk 18W Brick Adapter
19RFDCS910 Contactless Reader Chip Set With ST92163MCU
19RFDCSD10 Contactless Reader Chip Set
1N5711 Small Signal Schottky Diode
1N5817 Low Drop Power Schottky Rectifier
1N581830
1N5818RL
 
0-C     D-L     M-R     S-Z