Details, datasheet, quote on part number: RSOE-0505S/H2
PartRSOE-0505S/H2
CategoryPower => DC/DC Converters => 8826768
TitleIsolated DC/DC Converters 1W 4.5-9Vin 5Vout 200mA SIP8
Description

RECOM Power RSOE/RSE DC/DC Converters are designed for industrial applications. The single output converters are available in 1W (RSOE) or 2W (RSE), in a compact SIP8 case size. Features include 2:1 input, 2kVDC isolation and a wide operating temperature range of -40C to +80C without derating. Industrial Class A EMC levels can be met with a simple Pi-filter. The RSOE/RSE series is ideal for industrial, transport and general-purpose on-board 5V power supplies.

CompanyRecom Power
DatasheetDownload RSOE-0505S/H2 datasheet
Specifications 
Number of Outputs1 Output
Output Power1 W
Input Voltage4.5 V to 9 V
Output Voltage-Channel 15 V
Output Current-Channel 1200 mA
Isolation Voltage2 kVDC
Mounting StyleThrough Hole
Package/Case SizeSIP-8
Length21.8 mm
Width9.2 mm
Height11.1 mm
Commercial/MedicalCommercial
RSOE-0505S/H2 photo

Others parts numbering
RSE-0505S/H2: Isolated DC/DC Converters 2W 4.5-9Vin 5Vout 400mA SIP8
RSOE-2405S/H2: Isolated DC/DC Converters 1W 18-36Vin 5Vout 200mA SIP8
RSE-2405S/H2: Isolated DC/DC Converters 2W 18-36Vin 5Vout 400mA SIP8

 

Features, Applications
Features
Description

2:1 Wide Input Range 2kVDC/1 Second Isolation To +80C Operating Temperature @ Full Load Industry Standard Pinout UL60950, CB Report (pending) Low Cost

The RSOE is a low cost isolated, regulated and short-circuit protected DC/DC converter designed for industrial applications. A compact SIP8 case size, 2:1 input, 2kVDC isolation and a wide operating temperature range to +80C without derating makes the RSOE series ideal for industrial, transport and general-purpose on-board 5V power supplies. Industrial Class A EMC levels can be met with a simple Pi-filter and the converters come with a three year warranty.

Part Number RSOE-0505S/H2 RSOE-2405S/H2 Input Current Output Efficiency max. Capacitive Voltage Range @ full load Voltage Current typ. (1) Load (2) [VDC] [mA] [VDC][mA] [F]

Notes: Note1: Efficiency is tested at nominal input and full load at +25C ambient Note2: Max. cap load is tested at nominal input and full resistive load

Specifications (measured @ ta= 25C, nominal Vin, full load unless otherwise specified)

Internal Input Filter Input Voltage Range Maximum Reverse Voltage Input Surge Voltage Quiescent Current Start-up time Rise time Hold-up time Internal Operating Frequency Minimum Load Output Ripple and Noise (3) ON/OFF CTRL (4) Input Current of CTRL Pin Standby Current 20MHz BW, 0-100% load DC-DC ON DC-DC OFF 5V VCTRL 3.3V VCTRL 0% 75mVp-p Open 1.5mA 100ms max. nom. Vin= nom. Vin= 450s 10s nom. Vin= 5VDC 24VDC

UL62368-1 certified C22.2 No. 62368-1-14 certified UL60950 (pending) C22.2 No. 60950-1-07 (pending) IEC/EN62368-1 (pending) EN55022/55024 compliant CB Report

Notes: Note3: Measurements are made with a 0.1F MLCC across output (low ESR) Note4: Please refer to ,,Application and Installation" continued on next page

Output Accuracy Line Regulation Load Regulation
0-100% load low line to high line, full load to 100% load

Short Circuit Protection (SCP) Isolation Voltage Isolation Resistance Isolation Capacitance Insulation Grade continued on next page

continuous, auto recovery 2kVDC 1G min. 100pF max. functional

Notes: Note5: An input fuse is required if the mains supply is not over-current protected. Recommended fuse: T1A slow blow type

Operating Temperature Range Maximum Case Temperature Coefficient Operating Altitude Operating Humidity Pollution Degree MTBF Vibration according to MIL-HDBK-217F, G.B. +25C +80C

Information Technology Equipment, General Requirements for Safety Audio/Video, information and communication technology equipment - Safety requirements Audio/Video, information and communication technology equipment - Safety requirements (CB Scheme) RoHS2 continued on next page


 

Some Part number from the same manufacture Recom Power
RSE-0505S/H2

RECOM Power RSOE/RSE DC/DC Converters are designed for industrial applications. The single output converters are available in 1W (RSOE) or 2W (RSE), in a compact SIP8 case size. Features include 2:1 input,

RSOE-2405S/H2
RSE-2405S/H2
 
0-C     D-L     M-R     S-Z