Details, datasheet, quote on part number: ADL5205-EVALZ
PartADL5205-EVALZ
CategoryEmbedded Solutions => Engineering Tools => RF / Wireless Development Tools => RF Development Tools => 8826791
TitleRF Development Tools Eval Board
Description

Analog Devices ADL5205-EVALZ evaluation board helps the designer evaluate the features and capabilities of the ADL5205 amplifier. The board offers interfaces to the ADL5205 Dual DGA via serial and the parallel interface ports. The eval board can also interface to the ADL5205 using the USB port on a Microsoft® Windows® PC via the system demonstration platform (SDP) interface board. In addition, toggle switches manually control of all the digital functions for the Dual DGA. A 3.3V low dropout (LDO) voltage regulator supplies the logic circuits when the device is running on a 5V supply. On-board baluns convert single-ended input signals to differential form for input to the device. The on-board baluns also convert the differential output signals of the device to single-ended form for output.

CompanyAnalog Devices
DatasheetDownload ADL5205-EVALZ datasheet
Specifications 
Product CategoryRF Development Tools
ManufacturerAnalog Devices Inc.
ProductEvaluation Boards
TypeRF Amplifiers
Tool Is For Evaluation OfADL5205
Frequency1.7 GHz
Operating Supply Voltage3.3 V/5 V
BrandAnalog Devices
Interface TypeSPI
Maximum Operating Temperature+ 85 C
Minimum Operating Temperature- 40 C
SeriesADL5205
Factory Pack Quantity1
ADL5205-EVALZ photo

 

Features, Applications
FEATURES
SPI WITH FA, PARALLEL WITH LATCH, UP/DOWN PWUPA VPOS

Dual, independent, digitally controlled gain amplifier (DGA) +26 dB gain range 1 dB step size, ±0.2 dB accuracy at 200 MHz 100 differential input resistance 10 differential output resistance 1.2 dB change in noise figure for first dB of gain reduction Output third-order intercept (OIP3): 48.5 dBm at 200 MHz, 5 V, high performance mode -3 dB bandwidth: 1700 MHz typical in high performance mode Multiple control interface options Parallel 6-bit control interface with latch Serial peripheral interface (SPI) with fast attack Gain step up/down interface Wide input dynamic range Low power mode Power-down control Single 5 V supply operation 6 mm LFCSP package

SPI WITH FA, PARALLEL WITH LATCH, UP/DOWN PWUPB GND
APPLICATIONS

Differential analog-to-digital converter (ADC) drivers High intermediate frequency (IF) sampling receivers High output power IF amplification Instrumentation

The is a digitally controlled, wide bandwidth, variable gain dual amplifier (DGA) that provides precise gain control, high output third-order intercept (OIP3) and a near constant noise figure for the first dB of attenuation. The excellent OIP3 performance of 48.5 dBm (at 200 MHz, 5 V, high performance mode, and maximum gain) makes the ADL5205 an excellent gain control device for a variety of receiver applications. For wide input dynamic range applications, the ADL5205 provides a broad 35 dB gain range with 1 dB step size. The gain is adjustable through multiple gain control and interface options: parallel, SPI, or gain step up/down control. The two channels of the ADL5205 can be powered up independently by applying the appropriate logic level to the PWUPA and PWUPB pins. The quiescent current of the ADL5205 is typically 175 mA for high performance mode and 135 mA for

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.

low power mode. When disabled, the ADL5205 consumes only 14 mA and offers excellent input to output isolation. The gain setting is preserved when the device is disabled. Fabricated on the Analog Devices, Inc., high speed, silicon germanium (SiGe) complementary BiCMOS process, the ADL5205 provides precise gain adjustment capabilities with good distortion performance. The ADL5205 amplifier comes in a compact, thermally enhanced, × 6 mm, 40-lead LFCSP package and operates over the temperature range to +85°C. Note that throughout this data sheet, multifunction pins, such as CSA/A3, are referred to by the entire pin name by a single function of the pin, for example, CSA, when only that function is relevant.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 ©2016 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com

ADL5205 Material Declaration PCN-PDN Information Quality And Reliability Symbols and Footprints

Application Notes AN-1363: Meeting Biasing Requirements of Externally Biased RF/Microwave Amplifiers with Active Bias Controllers Data Sheet ADL5205: Dual, 35 dB Range, 1 dB Step Size DGA Data Sheet

Submit a technical question or find your regional support number.

This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.

Features.............................................................................................. 1 Applications....................................................................................... 1 Functional Block Diagram.............................................................. 1 General Description......................................................................... 1 Revision History............................................................................... 2 Specifications..................................................................................... 3 Timing Specifications.................................................................. 5 Absolute Maximum Ratings............................................................ 6 Thermal Resistance...................................................................... 6 Junction to Board Thermal Impedance..................................... 6 ESD Caution.................................................................................. 6 Pin Configuration and Function Descriptions............................. 7 Typical Performance Characteristics............................................. 9 Theory of Operation...................................................................... 17 Basic Structure............................................................................ 17 Control/Logic Circuitry............................................................. 17 Common-Mode Voltage............................................................ 17 Applications Information.............................................................. 18 Basic Connections...................................................................... 18 Digital Interface Overview........................................................ 19

SPI Read....................................................................................... 20 ADC Interfacing......................................................................... 21 Noise Figure vs. Gain Setting.................................................... 21 Evaluation Board............................................................................ 22 Overview..................................................................................... 22 Power Supply Interface.............................................................. 22 Signal Inputs and Outputs......................................................... 23 Manual Controls......................................................................... 23 Parallel Interface......................................................................... 24 Serial Interface............................................................................ 24 Standard Development Platform (SDP) Interface................. 25 Evaluation Board Control Software......................................... 25 Command Line Control Program............................................ 25 Graphical User Interface (GUI) Program............................... 25 Evaluation Board Schematics and Layout................................... 27 Bill of Materials........................................................................... 30 Outline Dimensions....................................................................... 31 Ordering Guide.......................................................................... 31


 

Some Part number from the same manufacture Analog Devices
1B21 ISOlated, Loop-powered Voltage-to-current Converter
1B21AN
1B22 Programmable, ISOlated Voltage-to-current Converter
1B31 Wide Bandwidth Strain Gage Signal Conditioner
1B31AN
1B31S
1B31SD
1B32 Bridge Transducer Signal Conditioner
1B41 ISOlated RTD Signal Conditioner
1B41AN
1B41B
1B41BN
1B51 ISOlated Mv/thermocouple Signal Conditioner
1B51AN
1B51B
1B51BN
2101-HARDWARE DSP Development Tools For The ADSP-2101
21020-HARDWARE Development Tools For The Analog Devices ADSP-21020 DSP
21061-HARDWARE DSP Development Tools For The ADSP-21061 Sharc(r) DSP
21065-HARDWARE DSP Development Tools For The ADSP-21065L Sharc DSP
21160-HARDWARE Development Tools For The ADSP-21160 DSP
 
0-C     D-L     M-R     S-Z