Details, datasheet, quote on part number: MAX17055XEVKIT
TitleKIT FOR MAX17055
CompanyMaxim Integrated Products
DatasheetDownload MAX17055XEVKIT datasheet

Others parts numbering


Features, Applications

The is a low 7A operating current fuel gauge that implements Maxim ModelGaugeTM m5 EZ algorithm. ModelGauge m5 EZ makes fuel gauge implementation easy by eliminating battery characterization requirements and simplifying host software interaction. The ModelGauge m5 EZ robust algorithm provides tolerance against battery diversity for most lithium batteries and applications. ModelGauge m5 EZ algorithm combines the short-term accuracy and linearity of a coulomb counter with the longterm stability of a voltage-based fuel gauge, along with temperature compensation to provide industry-leading fuel gauge accuracy. The MAX17055 automatically compensates for cell aging, temperature, and discharge rate, and provides accurate state of charge (SOC in and remaining capacity in milliampere-hours (mAh). As the battery approaches the critical region near empty, the ModelGauge m5 algorithm invokes a special compensation that eliminates any error. It also provides three methods for reporting the age of the battery: reduction in capacity, increase in battery resistance, and cycle odometer. The MAX17055 provides precision measurements of current, voltage, and temperature. Temperature of the battery pack is measured using an internal temperature measurement or external thermistor. 2-wire I2C interface provides access to data and control registers. The MAX17055 is available in a tiny, lead-free 0.4mm pitch 1.5mm, 9-pin WLP package, and 2.5mm, 10-pin TDFN package.

ModelGauge m5 EZ No Characterization Required for EZ Performance Robust Against Battery Variation Eliminates Error Near Empty Voltage Eliminates Coulomb Counter Drift Current, Temperature, and Age Compensated Does Not Require Empty, Full, or Idle States Low 7A Operating Current Wide Sense Resistor Range to 1000m PCB Metal Sensing + Temperature Compensation Supports Li+ and Variants Including LiFePO4 1C Internal Temperature or Thermistor Dynamic Power Estimates Power Capability During Discharge Time-to-Empty and Time-to-Full Estimation Constant Power or Constant Current Predicts Remaining Capacity Under Theoretical Load Precision Measurement System No Calibration Required Alert Indicator for Voltage, SOC, Temperature, Current and 1% SOC Change


Wearables, Smartwatches Smartphones Tablets, 2-in-1 Laptops Bluetooth Headsets Health and Fitness Monitors Digital Still, Video, and Action Cameras Medical Devices Handheld Computers and Terminals Wireless Speakers Home and Building Automation, Sensors Portable Game Players Toys

ModelGauge is a trademark of Maxim Integrated Products, Inc.

Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

Package Code Outline Number Land Pattern Number Thermal Resistance, Four-Layer Board: Junction to Ambient (JA) W91N1+1 21-100129 Refer to Application Note 1891

Package Code Outline Number Land Pattern Number Thermal Resistance, Four-Layer Board: Junction to Ambient (JA) Junction to Case (JC) 21-100013 90-100007

For the latest package outline information and land patterns (footprints), go to Note that or in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer board. For detailed information on package thermal considerations, refer to


Some Part number from the same manufacture Maxim Integrated Products

MAX5936LB : -48V Hot-swap Controllers With Vin Step Immunity And no Rsense The MAX5936/MAX5937 Are Hot-swap Controllers For -10V to -80V Rails. The MAX5936/MAX5937 Allow Circuit Line Cards to be Safely Hot-plugged Into a Live Backplane Without Causing a Glitch on The Power Supply. These Devices Integrate

MAX6746 : MAX6746, MAX6747, MAX6748, MAX6749, MAX6750, MAX6751, MAX6752, MAX6753 µP Reset Circuits With Capacitor-adjustable Reset/watchdog Timeout Delay

MAX6723AUTRHD6+ : Dual/Triple, Ultra-Low-Voltage, SOT23 P Supervisory Circuits The MAX6715AMAX6729A/MAX6797A are ultra-low-voltage microprocessor (??P) supervisory circuits designed to monitor two or three system power-supply voltages. These devices assert a system reset if any monitored supply falls below its fac

MAX6732UTVFD5-T : Single-/Dual-/Triple-Voltage P Supervisory Circuits With Independent Watchdog Output The MAX6730MAX6735 single-/dual-/triple-voltage microprocessor (P) supervisors feature a watchdog timer and manual reset capability. The MAX6730MAX6735 offer factory-set reset thresholds for monitoring voltages

MAX406C/D : 1.2a Max, Single/dual/quad, Single-supply Op Amps

MAX1763EUE+T : 1.5A, Low-Noise, 1MHz, Step-Up DC-DC Converter The MAX1763 is a high-efficiency, low-noise, step-up DC-DC converter intended for use in battery-powered wireless applications. This device maintains exceptionally low quiescent supply current (110µA) despite its high 1MHz operating frequency. Small e

MAX6858UK19D6+T : Pmic - Supervisor Integrated Circuit (ics) Simple Reset/Power-On Reset Tape & Reel (TR) 1; IC MPU SUPERVISOR SOT23-5 Specifications: Output: Push-Pull, Totem Pole ; Reset: Active Low ; Package / Case: SC-74A, SOT-753 ; Packaging: Tape & Reel (TR) ; Number of Voltages Monitored: 1 ; Reset Timeout: 600 ms Minimum ; Type: Simple Reset/Power-On Reset ; Voltage - Threshold: 1.9V ; Operating Temperature: -40C ~ 85

MAX6388LT24D5+T : Pmic - Supervisor Integrated Circuit (ics) Multi-Voltage Supervisor Tape & Reel (TR) 2; IC MPU/RESET CIRC 2.40V 6-UDFN Specifications: Output: Push-Pull, Totem Pole ; Reset: Active High ; Package / Case: 6-WFDFN ; Packaging: Tape & Reel (TR) ; Number of Voltages Monitored: 2 ; Reset Timeout: 280 ms Minimum ; Type: Multi-Voltage Supervisor ; Voltage - Threshold: 2.4V, Adj ; Operating Temperature: -40C ~ 125C ;

DG200ACY+ : DUAL 1-CHANNEL, SGL POLE SGL THROW SWITCH, MBCY10 Specifications: Supply Voltage (VS): -15 to 15 volts ; Ron: 80 ohms ; tON: 1000 ns ; tOFF: 500 ns ; Operating Temperature: 0.0 to 70 C (32 to 158 F) ; Logic Family: CMOS ; Package Type: METAL CAN, TO-100, 10 PIN ; Number of Pins: 10 ; Number of Devices: 2

DS1110S-500/T&R : SILICON DELAY LINE, TRUE OUTPUT, PDSO16 Specifications: Delay Line Type: SILICON DELAY LINE ; Package Type: Surface Mount, 0.300 INCH, SO-16 ; Time Delay: 500 ns

Same catergory

PT5816A : Plug-in Power Solutions->Non-Isolated->Single Posi. ti PT5816, 1V 20-A, 3.3-V Input Adjustable Step-down Isr.

QG206A : Voltage 50V ~ 1000v 2.0amp Surface Mount Silicon Rectifiers. * Ideal for surface mount applications * Easy pick and place * Built-in strain relief * High surge current capability * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Terminals: Solder plated, solderable per MIL-STD-202F , method 208 guaranteed * Polarity: Color band denotes cathode end * Mounting position: Any * Weight: 0.063 gram Rating.

V23061-A1002-A302 : Miniature Power PCB Relay. 1 pole or 1NO contact High inrush currents with AgSnO contacts kV/8 mm coil-contact Reinforced insulation (protection class II) Ambient temperature 8 A Plastic materials according to IEC60335-1 (domestic appliances) RoHS compliant (Directive EC) as per product date code 0404 Applications HVAC, interface technology, power supplies, TV-/Monitor control,.

DS80C310_1 : High-speed Microcontroller User Guide. The Dallas Semiconductor High-Speed Microcontroller an 8051-compatible device that provides improved performance and power consumption compared to the original version. It retains instruction set and object code compatibility with the 8051, yet performs the same operations in fewer clock cycles. Consequently, more throughput is possible for the same.

5-1437652-5 : Through Hole Terminal Block - Barrier Block Connectors, Interconnect Through Hole; BARRIER STRIP 3POS VERT .375. s: Color: Black ; Mounting Type: Through Hole ; Number of Positions: 3 ; Number of Rows: 1 ; Pitch: 0.375" (9.53mm) ; Terminal Block Type: Barrier Block ; Number of Circuits: 3 ; : - ; Current: 25A ; Voltage: 300V ; Wire Gauge: 12-22 AWG ; Top Termination:.

10-00123 : 2.5mm ID, 5.5mm OD Barrel - Power Cable Assembly 6.56' (2.00m); CABLE ASSY 5.5X2.5MM R/A 2M SHLD. s: Connector Type: 2.5mm ID, 5.5mm OD ; Style: Plug, Right Angle to Wire Leads ; Length: 6.56' (2.00m) ; Cable Type: Round ; Shielding: Shielded ; Usage: Single Ended ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

UCW1V330MCL1GS : 33F Aluminum Capacitor Radial, Can - SMD 35V; CAP ALUM 33UF 35V 20% SMD. s: Capacitance: 33F ; ESR (Equivalent Series Resistance): - ; : General Purpose ; Lifetime @ Temp.: 7000 Hrs @ 105C ; Size / Dimension: 0.248" Dia (6.30mm) ; Lead Spacing: - ; Surface Mount Land Size: 0.260" L x 0.260" W (6.60mm x 6.60mm) ; Mounting Type: Surface Mount ; Package.

1327C SL001 : UNSHLD MULTIPR CABLE 15PR 1000FT 150V GRY. s: Reel Length (Imperial): 1000ft ; Reel Length (Metric): 304.8m ; LAN Category: - ; No. of Pairs: 15 ; Conductor Size AWG: 22AWG ; No. of Strands x Strand Size: 7 x 30AWG ; Jacket Color: Grey ; Jacket Material: PVC (Polyvinyl Chloride) ; Voltage Rating: 150V ; External Diameter: 11.43mm ; Conductor Area CSA:.

C0805C689JCGACTU : 6.8pF Ceramic Capacitor 0805 (2012 Metric) 500V; CAP CER 6.8PF 500V 5% NP0 0805. s: Capacitance: 6.8pF ; Voltage - Rated: 500V ; Tolerance: 5% ; Package / Case: 0805 (2012 Metric) ; Temperature Coefficient: C0G, NP0 ; Packaging: Tape & Reel (TR) ; : High Voltage ; Lead Spacing: - ; Operating Temperature: -55C ~ 125C ; Mounting Type: Surface Mount,.

195D474X0010S2W : 0.47F Tantalum Capacitor 1507 (3718 Metric) 10V; CAP TANT 0.47UF 10V 20% 1507. s: Capacitance: 0.47F ; Voltage - Rated: 10V ; Tolerance: 20% ; : General Purpose ; Operating Temperature: -55C ~ 125C ; Lead Spacing: - ; ESR (Equivalent Series Resistance): - ; Lifetime @ Temp.: - ; Mounting Type: Surface Mount ; Type: Conformal Coated ; Package / Case:.

TPSB685M016R0600 : 6.8F Tantalum Capacitor 1210 (3528 Metric) 16V; CAP TANT 6.8UF 16V 20% 1210. s: Capacitance: 6.8F ; Voltage - Rated: 16V ; Tolerance: 20% ; : General Purpose ; Operating Temperature: -55C ~ 125C ; Lead Spacing: - ; ESR (Equivalent Series Resistance): 600.0 mOhm ; Lifetime @ Temp.: - ; Mounting Type: Surface Mount ; Type: Molded ; Package / Case:.

NCP694DSANADJT1G : Low Dropout (LDO) Regulators 1A CMOS B/S LDO. ON Semiconductor NCP694 1A CMOS fixed output, super low dropout linear voltage regulators are designed for portable battery powered applications with high output requirements up to 1A and -3mV typical load regulation at 1A. ON Semiconductor NCP694 voltage regulators contain a voltage reference unit, an error.

C8051F800-GM : Microcontrollers (MCU) 16kB, 512B RAM, ADC, 16-ch CDC. The Silicon Labs QuickSense™ Human Interface product portfolio includes the C8051F8xx capacitive sensing microcontroller (MCU) and the Si11xx infrared sensor. The Silicon Labs QuickSense C8051F8xx MCU provides the fastest touch sense for buttons, wheels, sliders, and capacitive proximity sensing.

RNF12FTD169K : 169K Ohm 0.5W, 1/2W Through Hole Resistors; RES 169K OHM 1/2W 1% AXIAL. s: Resistance (Ohms): 169K ; Power (Watts): 0.5W, 1/2W ; Tolerance: 1% ; Packaging: Tape & Reel (TR) ; Composition: Metal Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

4-1879671-3 : 365K Ohm 0.5W, 1/2W Through Hole Resistors; RES 365K OHM 1/2W 0.1% AXIAL. s: Resistance (Ohms): 365K ; Power (Watts): 0.5W, 1/2W ; Tolerance: 0.1% ; Packaging: Bulk ; Composition: Metal Film ; Temperature Coefficient: 25ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

6-1879127-7 : 422 Ohm 0.063W, 1/16W Chip Resistor - Surface Mount; RES 422 OHM 1/16W 0.1% 0402. s: Resistance (Ohms): 422 ; Power (Watts): 0.063W, 1/16W ; Tolerance: 0.1% ; Packaging: Bulk ; Composition: Thin Film ; Temperature Coefficient: 10ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

6-103795-2 : Tin Through Hole, Right Angle Rectangular - Headers, Male Pin Connectors, Interconnect Header, Unshrouded, Breakaway; 24 MODII HDR DRRA B/A .100CL LF. s: Color: Black ; Connector Type: Header, Unshrouded, Breakaway ; Contact Finish: Tin ; Contact Mating Length: 0.230" (5.84mm) ; : - ; Mounting Type: Through Hole, Right Angle ; Number of Positions Loaded:.

BS-CE1DRI-A : 7 SEG NUMERIC DISPLAY, SUPER RED, 101.2 mm. s: Display Type: Segmented ; Character Type: Numeric ; Common: Common Cathode ; LED Color: Red ; Character Height: 101 mm (3.98 inch) ; Operating Temperature: -40 to 176 F (233 to 353 K).

RVC03 : RESISTOR, METAL GLAZE/THICK FILM, 0.1 W, 5; 10 %, 250; 500 ppm, 20000 ohm - 100000000 ohm, SURFACE MOUNT, 0603. s: Category / Application: General Use ; Technology / Construction: Thick Film (Chip) ; Mounting / Packaging: Surface Mount Technology (SMT / SMD), 0603, CHIP ; Operating DC Voltage: 300 volts ; Operating Temperature: -55 to 125 C (-67 to 257 F).

0-C     D-L     M-R     S-Z