Details, datasheet, quote on part number: XM-X9-3P-U
PartXM-X9-3P-U
CategoryEmbedded Solutions => RF / Wireless Modules => 8827324
TitleRF Modules XBee SX Modem RS232/485,N.A.
Description

Digi International XBee® SX RF Modems provide reliability for building low-power, mission-critical wireless systems. Interface options including RS232/485 or Digital/Analog I/O. The modems utilize the DigiMesh® wireless networking protocol with redundant mesh network operation and support for low-power sleeping nodes. The modem can operate in simple point to multipoint mode for designs that don't require mesh network architecture. RF line-of-sight range is estimated up to 65 miles with strong interference blocking. The SX RF are ideal for applications requiring a reliable, redundant wireless cable replacement over longer ranges. The modems can be configured easily via the USB port, using Digi's free XCTU software and are precertified for use in multiple countries. The XBee SX RF Modems provide secure, reliable delivery of critical data between devices with 256-bit AES encryption.

CompanyDigi International
DatasheetDownload XM-X9-3P-U datasheet
Specifications 
ProductRF Modems
Frequency902 MHz to 928 MHz
Output Power1 W
Interface TypeRS-232/485, USB
Operating Supply Voltage7 V to 30 V
Supply Current Transmitting300 mA
Supply Current Receiving20 mA
Maximum Operating Temperature+ 85 C
XM-X9-3P-U photo

Others parts numbering
XM-X9-5P-U: RF Modules XBee SX Modem AIO/DIO, N.A.

 

Features, Applications

1-Watt 900 MHz RF modem features best-in-class range and power consumption for mission-critical wireless cable replacement

Digi XBee 1-Watt 900 MHz RF modems provide a combination reliability and redundancy for integrators building low-power, mission-critical wireless systems. With interface options including RS232/485 or Digital/Analog I/O, these modems utilize the DigiMesh® wireless networking protocol, with redundant mesh network operation and support for low-power sleeping nodes. Customers that don't require mesh network architecture can configure the modem to operate in simple point to multipoint mode. With ideal RF line-of-sight range estimated to 65 miles and strong interference blocking, these modems are ideal for applications requiring a reliable, redundant wireless cable replacement over longer ranges. The Digi XBee SX modems can be configured easily via the USB port, using Digi's free XCTU software. They are precertified for use in multiple countries and provide secure, reliable delivery of critical data between devices with 256-bit AES encryption.

BENEFITS ­ Adjustable output power to 1-Watt achieves to 65 mile range with high gain antenna ­ Interfaces options include RS-232, RS-485, USB, Analog I/O and Digital I/O ­ DigiMesh networking topology for redundancy and reliability ­ 256-bit AES encryption for secure data communications ­ Rugged metal enclosure and +85º C operating temperature for industrial applications ­ Fully certified for use in free, unlicensed 900 MHz band

SPECIFICATIONS

km (11 mi)* at low data rate km (65 mi)** at low data rate to 30 dBm software selectable Low data rate: 10 kbps; Middle data rate: 110 kbps; High data rate: 250 kbps Low data rate: -113 dBm; Middle data rate: -106 dBm; High data rate: -103 dBm Low data rate: @ 250 kHz; @ 500 kHz Middle data rate: @ 250 kHz; @ 500 kHz High data rate: @ 500 kHz; @ 1000 kHz Below 900 MHz and above 930 MHz: >50 dB

INDOOR/URBAN RANGE OUTDOOR/RF LINE-OF-SIGHT RANGE TRANSMIT POWER RF DATA RATE (SOFTWARE SELECTABLE) RECEIVER SENSITIVITY RECEIVER IF SELECTIVITY RECEIVER RF SELECTIVITY

FREQUENCY RANGE SPREAD SPECTRUM SUPPORTED NETWORK TOPOLOGIES MODULATION ENCRYPTION

ISM 902 MHz to 928 MHz Frequency hopping Mesh, Point-to-point, Point-to-multipoint, Peer-to-peer Gaussian Frequency Shift Keying (GFSK) Optional 254-bit Advanced Encryption Standard (AES) cipher block chaining (CBC) Encryption

CONNECTOR ANTENNA IMPEDANCE INPUT LEVEL AT ANTENNA PORT
SUPPLY VOLTAGE RANGE TYPICAL SUPPLY VOLTAGE RECEIVE CURRENT TRANSMIT CURRENT SLEEP CURRENT
SIZE WEIGHT DATA CONNECTION OPERATING TEMPERATURE

x 2.9 cm) (142 g) Female (RS232/485), 10-pin screw terminal (4 digital, 4 analog, GND, 12 VDC output), USB mini-B (configuration port) +85° C (Industrial)

* We estimate rural ranges based km (9 mi) range test with dipole antennas. **Range estimated assuming that the urban noise floor is approximately 15 dB higher than rural. The actual range depends on the setup and level of interference in your location.

Maximum: 11 V; Minimum: -.05 V (each pin) Single-ended voltage mode: - 10 VDC Current loop mode: 20 mA Differential voltage mode: ± 4 VCD Single-ended voltage mode: 13300 Current loop mode: 120 Differential voltage mode: 25º C

ABSOLUTE VOLTAGE RATING OPERATING INPUT RANGE

INPUT TYPE POSITIVE-GOING SWITCHING THRESHOLD NEGATIVE-GOING SWITCHING THRESHOLD ABSOLUTE VOLTAGE RATING IMPUT IMDEDANCE

Non-inverting Schmitt trigger gate V 1V Maximum: 31 V; Minimum: -.05 V (each pin) ~1 M
OUTPUT TYPE MAXIMUM SINK CURRENT MAXIMUM SUPPLY VOLTAGE RESISTOR PULL-UPS
Open collector sinking driver 31 V (for external pull-up resistor) 10 k pulled to 3.3 VDC
DESCRIPTION
XBee SX Modem, RS232/485, North America XBee SX Modem, AIO/DIO, North America

DIGI SERVICE AND SUPPORT / You can purchase with confidence knowing that Digi is always available to serve you with expert technical support and our industry leading warranty. For detailed information visit www.digi.com/support. © 1996-2017 Digi International Inc. All rights reserved. All trademarks are the property of their respective owners. 91003522 A2/117

DIGI INTERNATIONAL WORLDWIDE HQ www.digi.com DIGI INTERNATIONAL FRANCE +33-1-55-61-98-98 / www.digi.fr DIGI INTERNATIONAL JAPAN +81-3-5428-0261 / www.digi-intl.co.jp

DIGI INTERNATIONAL SINGAPORE +65-6213-5380 DIGI INTERNATIONAL CHINA +86-21-50492199 / www.digi.com.cn


 

Some Part number from the same manufacture Digi International
XM-X9-5P-U

Digi International XBee® SX RF Modems provide reliability for building low-power, mission-critical wireless systems. Interface options including RS232/485 or Digital/Analog I/O. The modems utilize the DigiMesh®

 
0-C     D-L     M-R     S-Z