Details, datasheet, quote on part number: MAX17222
PartMAX17222
Category
Title400mV to 5.5V Input, nanoPower Synchronous Boost Converter with True Shutdown
DescriptionThe MAX17220MAX17225 is a family of ultra-low quiescent current boost (step-up) DC-DC converters with a 225mA/0.5A/1A peak inductor current limit and True Shutdown. True Shutdown disconnects the output from the input with no forward or reverse current. The output voltage is selectable using a single standard 1% resistor. The 225mA (MAX17220), 500mA (MAX17221/MAX17222/MAX17223), and 1A (MAX17224/MAX17225) peak inductor current limits allow flexibility when choosing inductors. The MAX17220/MAX17222/MAX17224 versions have post-startup enable transient protection (ETP), allowing the output to remain regulated for input voltages down to 400mV, depending on load current. The MAX17220MAX17225 offer ultra-low quiescent current, small total solution size, and high efficiency throughout the entire load range. The MAX17220MAX17225 are ideal for battery applications where long battery life is a must.
CompanyMaxim Integrated Products
DatasheetDownload MAX17222 datasheet
  
MAX17222 photo

 

Features, Applications

to 5.5V Input, nanoPower Synchronous Boost Converter with True Shutdown

The is a family of ultra-low quiescent current boost (step-up) DC-DC converters with a 225mA/0.5A/1A peak inductor current limit and True ShutdownTM. True Shutdown disconnects the output from the input with no forward or reverse current. The output voltage is selectable using a single standard 1% resistor. The (MAX17221/MAX17222/ MAX17223), and 1A (MAX17224/MAX17225) peak inductor current limits allow flexibility when choosing inductors. The MAX17220/MAX17222/MAX17224 versions have poststartup enable transient protection (ETP), allowing the output to remain regulated for input voltages down to 400mV, depending on load current. The MAX17220 MAX17225 offer ultra-low quiescent current, small total solution size, and high efficiency throughout the entire load range. The MAX17220MAX17225 are ideal for battery applications where long battery life is a must.

300nA Quiescent Supply Current Into OUT True Shutdown Mode 0.5nA Shutdown Current Output Disconnects from Input No Reverse Current with VOUT 5V 95% Peak Efficiency to 5.5V Input Range 0.88V Minimum Startup Voltage to 5V Output Voltage Range 100mV/Step Single 1% Resistor Selectable Output 225mA, 500mA, and 1A Peak Inductor Current Limit MAX17220: 225mA ILIM MAX17221/MAX17222/MAX17223: 500mA ILIM MAX17224/MAX17225: 1A ILIM MAX17220/MAX17222/MAX17224 Enable Transient Protection (ETP) 2mm 6-Pin DFN 1.4mm 6-Bump WLP 3, 0.4mm Pitch)

Applications

Optical Heart-Rate Monitoring (OHRM) LED Drivers Supercapacitor Backup for RTC/Alarm Buzzers Primary-Cell Portable Systems

Tiny, Low-Power IoT Sensors Secondary-Cell Portable Systems Wearable Devices Battery-Powered Medical Equipment Low-Power Wireless Communication Products

True Shutdown is a trademark of Maxim Integrated Products, Inc.
to 5.5V Input, nanoPower Synchronous Boost Converter with True Shutdown

OUT, EN, to +6V RSEL to GND................. -0.3V to Lower of (VOUT 6V LX RMS Current +1.6Arms LX RMS Current to +1Arms Continuous Power Dissipation (TA = 70C) WLP (derate 10.5mW/C above +70C).......................840mW

Continuous Power Dissipation (TA = 70C) DFN (derate 4.5mW/C above +70C)....................357.8mW Operating Temperature Range............................ to +85C Junction Temperature.......................................................+150C Storage Temperature Range............................. to +150C Soldering Temperature (reflow)........................................ +260C

Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

PACKAGE CODE Outline Number Land Pattern Number Thermal Resistance, Four-Layer Board: Junction to Ambient (JA) N60E1+1 21-100128 Refer to Application Note 1891 95.15C/W N/A Junction to Case (JC) PACKAGE CODE Outline Number Land Pattern Number Thermal Resistance, Four-Layer Board: Junction to Ambient (JA) Junction to Case (JC) 90-0004 L622+1C

For the latest package outline information and land patterns (footprints), go to www.maximintegrated.com/packages. Note that or in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer board. For detailed information on package thermal considerations, refer to www.maximintegrated.com/thermal-tutorial.

to 5.5V Input, nanoPower Synchronous Boost Converter with True Shutdown

(VIN = VEN = 1.5V, VOUT to +85C, typical values are = +25C, unless otherwise noted. (Note 1)) PARAMETER Minimum Input Voltage Input Voltage Range Minimum Startup Input Voltage Output Voltage Range Output Accuracy, LPM Output Accuracy, Ultra-Low-Power Mode SYMBOL VIN_MIN VIN VIN_STARTUP VOUT ACCLPM ACCULPM CONDITIONS Runs from output after startup, IOUT = 1mA Guaranteed by LX Maximum On-Time RL 3k, Typical Operating Circuit, 25C , See RSEL Selection table. For VIN < VOUT target. Note 2. VOUT falling, when LX switching frequency > 1MHz. Note 3. VOUT falling, when LX switching frequency > 1kHz. Note EN = open after startup. EN = VIN. TA= 25C. Not switching, VOUT 104% of VOUT target. EN = open after startup. EN = VIN. = 85C Not switching, VOUT 104% of VOUT target. EN = Open after startup. EN = VIN. Not switching, VOUT 104% of VOUT target. Total current includes IN, LX, and EN. 25C. MAX17220/2/3/4/5, RL= 3k, VOUT = VEN 0V. MAX17221, RL= open,VE 25C. MAX17220/2/3/4/5, RL= RL = open, VEN = 0V, VIN = VLX = 3V. Includes LX and IN leakage. 25C. MAX17220 IPEAK DC tON tOFF Note 5 Note 6 Note 6 Note 6 VOUT = 1.8V VOUT = 3V VOUT = 1.8V VOUT MAX17221/2/3 MAX17224/5 MIN TYP MAX UNITS mV

Quiescent Supply Current Into IN Total Quiescent Supply Current into LX EN

Shutdown Current Into IN Total Shutdown Current into IN LX Inductor Peak Current Limit LX Maximum Duty Cycle LX Maximum On-Time LX Minimum Off-Time


 

Some Part number from the same manufacture Maxim Integrated Products
MAX17225 The MAX17220MAX17225 is a family of ultra-low quiescent current boost (step-up) DC-DC converters with a 225mA/0.5A/1A peak inductor current limit and True Shutdown. True Shutdown disconnects the output
Same catergory

ILC5061AM25 : Voltage Detector (2.5V). Power Supply reset Monitor with 1% Precision All-CMOS design or SC70 package 1% precision in Reset Detection Only 2mA of sink current capability Built-in hysteresis 5% of detection voltage Voltage options of and 4.6V fit most supervisory applications Open-Drain Reset Output All-CMOS Monitor circuits in either or SC70 package offer the best performance.

LT1109 : LT1109, Micropower Low Cost DC/DC Converter-adjustable. LT1109 Micropower Low Cost DC/DC Converter Adjustable and Fixed 5V, 12V Uses Off-the-Shelf Inductors Only 33H Inductor Required Low Cost or 8-Pin DIP Adjustable or Fixed or 12V Output 120kHz Oscillator Only Three External Components Required IQ 1.6V Minimum Start-Up Voltage Logic Controlled Shutdown The is a simple step-up DC/DC converter. Available.

TDA7463D013TR : Low Voltage Tone Control Digitally Controlled Audio Processor. LOW VOLTAGE TONE CONTROL DIGITALLY CONTROLLED AUDIO PROCESSOR 1 STEREO INPUT 1 STEREO OUTPUT TREBLE BOOST BASS CONTROL BASS AUTOMATIC LEVEL CONTROL VOLUME CONTROL IN 1dB STEPS MUTE STAND-BY FUNCTION SOFTWARE CONTROLLED ALL FUNCTION ARE PROGRAMMABLE VIA SERIAL BUS the functions is accomplished by serial bus. The AC signal setting is obtained by resistor.

EL9202 : Programmable VCOM. The EL9200, EL9201, and EL9202 represent programmable VCOM amplifiers for use in TFT-LCD displays. Featuring 1, 2, and 4 channels of VCOM amplification, respectively, each device just a single programmable current source for adding offset to one VCOM output. This current source is programmable using a single wire interface to one of 128 levels. The value.

282007 : Fuseholders - For Microtm Fuse Plug-in Fuses. RF-Shielded Front Panel Mount Type / Rear Panel Mount Type Space Saving. RF-shielded design holds miniature MICROTM fuse. Screw-on drip-proof knob construction permits use when presence of moisture exists at front of panels. S: Electrical: Rated at 5 amperes for any voltage to 125 volts. Mounting: Front panel mount, maximum panel thickness:.093". Rear.

AAT1410 : Serial LED Driver with Direct PWM and 32 Step SC Dimming Control White LED Backlight Driver. The AAT1410 is a step-up single channel LED driver with an input voltage range of 2.7V to 5.5V. The wide input voltage range, small solution size, advanced dimming and high efficiency is suitable for LED backlight solutions for single cell Li-Ion based equipment.

RFS-25V101MH4#5 : 100F Aluminum Capacitor Radial, Can 25V; CAP ALUM 100UF 25V 20% RADIAL. s: Capacitance: 100F ; ESR (Equivalent Series Resistance): - ; : Audio ; Lifetime @ Temp.: 1000 Hrs @ 85C ; Size / Dimension: 0.394" Dia (10.00mm) ; Lead Spacing: 0.197" (5.00mm) ; Surface Mount Land Size: - ; Mounting Type: Through Hole ; Package / Case: Radial, Can ; Packaging:.

06031A150GAT4A : 15pF Ceramic Capacitor 0603 (1608 Metric) 100V; CAP CER 15PF 100V NP0 0603. s: Capacitance: 15pF ; Voltage - Rated: 100V ; Tolerance: 2% ; Package / Case: 0603 (1608 Metric) ; Temperature Coefficient: C0G, NP0 ; Packaging: Tape & Reel (TR) ; : - ; Lead Spacing: - ; Operating Temperature: -55C ~ 125C ; Mounting Type: Surface Mount, MLCC ; Lead.

LM2931ACDG : Pmic - Voltage Regulator - Linear (ldo) Integrated Circuit (ics); IC REG LDO 100MA ADJ 8SOIC. s: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

QK008L5 : Triac Discrete Semiconductor Product 8A 1000V (1kV) Standard; TRIAC 1000V 8A ISO TO-220. s: Triac Type: Standard ; Configuration: Single ; Voltage - Off State: 1000V (1kV) ; Current - On State (It (RMS)) (Max): 8A ; Voltage - Gate Trigger (Vgt) (Max): 1.3V ; Current - Gate Trigger (Igt) (Max): 50mA ; Current - Hold (Ih) (Max): 50mA ; Current - Non Rep.

OSTV7163251 : Through Hole Terminal Block - Headers, Plug And Socket Connectors, Interconnect Header, Female Sockets; TERM BLOCK PLUG 3.81MM 16POS. s: Terminal Block Type: Header, Female Sockets ; Positions Per Level: 16 ; Pitch: 0.150" (3.81mm) ; Number of Levels: 1 ; Header Orientation: 90, Right Angle ; Plug Wire Entry: - ; Termination: Solder ; Wire Gauge: - ; Current:.

WM022I,BK : Plastic, ABS PCB Supports, Wall Mount Box Boxes, Enclosures, Rack Box with Mounting Flange; WALLMNT ENCLOSURE 4.10X2.60X1.60. s: Color: Black ; Design: Cover Included ; : PCB Supports, Wall Mount ; Material: Plastic, ABS ; Ratings: IP40, NEMA 1 ; Shipping Info: Shipped from Digi-Key ; Size / Dimension: 4.100" L x 2.600" W (104.14mm x 66.04mm) ; Thickness:.

0337005.PXS : Fuses 32V 5A MICRO3. Littelfuse 337 Series MICRO3& 8482; Blade 32V Fuses combine two individual fused circuits in a single sub-miniature body to provide an ideal solution for space-constrained systems. By housing two fuse elements in a single package less than 15mm wide with 5mm terminal spacing, MICRO3& 8482; allows for more circuits in a smaller space,.

55737-201 : PCB CONNECTOR, PLUG. s: Applications: PCB.

FAN501MPX : Switching Controllers PSR CC + SSR CV with CCM control. Fairchild's FAN501/FAN501A Offline DCM/CCM Flyback PWM Controllers that are an advanced PWM controller that simplifies isolated power supply design that requires CC regulation of the output. The output current is precisely estimated with only the information in the primary side of the transformer.

 
0-C     D-L     M-R     S-Z