Details, datasheet, quote on part number: ADE9000ACPZ
PartADE9000ACPZ
Category
TitleCurrent & Power Monitors & Regulators IC, Power Quality Monitoring AFE
Description

Analog Devices ADE9000 Analog Front Ends (AFEs) are fully integrated, multi-phase energy and power quality monitoring devices. The design integrates seven high-performance ADCs, a high-end reference, a flexible digital signal processing (DSP) core, and proprietary algorithms into a single device. ADE9000's fully integrated design simplifies complex algorithm programming, reduces component count, and supports the EN61000-4-30 Class S standard for power quality.



CompanyAnalog Devices
DatasheetDownload ADE9000ACPZ datasheet
  
ADE9000ACPZ photo

Others parts numbering
EVAL-ADE9000EBZ: Power Management IC Development Tools ADE9000 eval board
ADE9000ACPZ-RL

 

Features, Applications
FEATURES
High Performance, Multiphase Energy, and Power Quality Monitoring IC ADE9000

Events, such as dip and swell, can trigger waveform storage Simplifies data collection for IEC 61000-4-7 harmonic analysis Advanced metrology feature set Total and fundamental active power, volt amperes reactive (VAR), volt amperes (VA), watthour, VAR hour, and VA hour Total and fundamental IRMS, VRMS Total harmonic distortion Power factor Supports active energy standards: IEC 62053-21 and IEC 62053-22; EN50470-3; OIML R46; and ANSI C12.20 Supports reactive energy standards: IEC 62053-23, IEC 62053-24 High speed communication port: 20 MHz serial port interface (SPI) Integrated temperature sensor with 12-bit successive approximation register (SAR) ADC 3C accuracy from to +85C

7 high performance ADCs 101 dB SNR Wide input voltage range: 707 mV rms FS at gain = 1 Differential inputs 25 ppm/C maximum channel drift (including ADC, internal VREF, PGA drift) enabling 10000:1 dynamic input range Class 0.2 metrology with standard external components Power quality measurements Enables implementation of IEC 61000-4-30 Class S VRMS IRMS rms voltage refreshed each half cycle 10 cycle rms/12 cycle rms Dip and swell monitors Line frequency--one per phase Zero crossing, zero-crossing timeout Phase angle measurements Supports CTs and Rogowski coil (di/dt) sensors Multiple range phase/gain compensation for CTs Digital integrator for Rogowski coils Flexible waveform buffer Able to resample waveform to ensure 128 points per line cycle for ease of external harmonic analysis

APPLICATIONS

Energy and power monitoring Power quality monitoring Protective devices Machine health Smart power distribution units Polyphase energy meters

The is a highly accurate, fully integrated, multiphase energy and power quality monitoring device. Superior analog performance and a digital signal processing (DSP) core enable accurate energy monitoring over a wide dynamic range. An integrated high end reference ensures low drift over temperature with a combined drift of less than 25 ppm/C maximum for the entire channel including a programmable gain amplifier (PGA) and an analog-to-digital converter (ADC). The ADE9000 offers complete power monitoring capability by providing total as well as fundamental measurements on rms, active, reactive, and apparent powers and energies. Advanced features such as dip and swell monitoring, frequency, phase angle, voltage total harmonic distortion (VTHD), current total harmonic distortion (ITHD), and power factor measurements enable implementation of power quality measurements. The cycle rms and 10 cycle rms/12 cycle rms, calculated according to IEC 61000-4-30 Class S, provide instantaneous rms measurements for real-time monitoring. The ADE9000 offers an integrated flexible waveform buffer that stores samples at a fixed data rate of 32 kSPS or 8 kSPS, or a

sampling rate that varies based on line frequency to ensure 128 points per line cycle. Resampling simplifies fast Fourier transform (FFT) calculation of at least 50 harmonics in an external processor according to IEC 61000-4-7. The ADE9000 simplifies the implementation of energy and power quality monitoring systems by providing tight integration of acquisition and calculation engines. The integrated ADCs and DSP engine calculate various parameters and provide data through user accessible registers or indicate events through interrupt pins. With seven dedicated ADC channels, the ADE9000 can be used a 3-phase system up to three single-phase systems. It supports current transformers (CTs) or Rogowski coils for current measurements. A digital integrator eliminates a discrete integrator required for Rogowski coils. The ADE9000 absorbs most complexity in calculations for a power monitoring system. With a simple host microcontroller, the ADE9000 enables the design of standalone monitoring or protection systems, or low cost nodes uploading data into the cloud. Note that throughout this data sheet, multifunction pins, such as CF4/EVENT/DREADY, are referred to either by the entire pin name by a single function of the pin, for example, EVENT, when only that function is relevant.

Protected by U.S. Patents 8,350,558; 8,010,304. Other patents are pending. Document Feedback

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 2017 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com

Press Highly Integrated AFE for Power Quality Monitoring Saves Significant Design Time and Cost Versus Custom Development

Data Sheet ADE9000: High Performance, Multiphase Energy, and Power Quality Monitoring IC Data Sheet Product Highlight ADE9000 Product Highlight User Guides UG-1082: Evaluating the ADE9000 High Performance, Multiphase Energy, Power Quality Monitoring IC

ADE9000 Material Declaration PCN-PDN Information Quality And Reliability Symbols and Footprints

ADE9000 Software Driver Visit the product page to see pricing options.
ADE9000 Calibration Tool Submit a technical question or find your regional support number.

This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.

Features.............................................................................................. 1 Applications....................................................................................... 1 General Description......................................................................... 1 Revision History............................................................................... 2 Typical Applications Circuit............................................................ 3 Specifications..................................................................................... 4 Timing Characteristics................................................................ 8 Absolute Maximum Ratings............................................................ 9 Thermal Resistance...................................................................... 9 ESD Caution.................................................................................. 9 Pin Configuration and Function Descriptions........................... 10 Typical Performance Characteristics........................................... 12 Energy Linearity over Supply and Temperature..................... 12 Energy Error over Frequency and Power Factor.................... 15 Energy Linearity Repeatability................................................. 16 RMS Linearity over Temperature and RMS Error over Frequency.................................................................................... 17 Energy and RMS Linearity with Integrator On...................... 19 Energy and RMS Error over Frequency with Integrator On..... 21

Signal-to-Noise Ratio Performance......................................... 23 Test Circuit...................................................................................... 24 Terminology.................................................................................... 25 Theory of Operation...................................................................... 26 Measurements............................................................................. 26 Power Quality Measurements................................................... 31 Waveform Buffer............................................................................ 35 Interrupts/Events............................................................................ 36 Accessing On-Chip Data............................................................... 37 SPI Protocol Overview.............................................................. 37 Additional Communication Verification Registers............... 37 CRC of Configuration Registers............................................... 37 Configuration Lock.................................................................... 37 Register Map................................................................................... 38 Register Details............................................................................... 51 Outline Dimensions....................................................................... 72 Ordering Guide.......................................................................... 72


 

Some Part number from the same manufacture Analog Devices
EVAL-ADE9000EBZ

Analog Devices ADE9000 Analog Front Ends (AFEs) are fully integrated, multi-phase energy and power quality monitoring devices. The design integrates seven high-performance ADCs, a high-end reference,

ADE9000ACPZ-RL
Same catergory

IRF830 : Medium Voltage. N-channel 500V - 1.35 Ohm - 4.5A - TO-220 Powermesh MOSFET.

ACV32212 : Automotive LOW Profile Micro-iso/micro-280 Relay. Low profile: inch(L).591 inch(W).618 inch(H) Low temperature rise Terminal temperature has been reduced compared with using our conventional product Low sound pressure level Noise level has been reduced approx.10dB compared with using our conventional product. Wide line-up Micro ISO/Micro 280 terminal types and resistor and diode inside type, PCB terminal.

HUN2111 : PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network.

TC3339 : 2.9 - 3.7 GHz 1W MMIC. P-1 dB: 30 dBm Small Signal Gain: 26 dB Power Added Efficiency: IP3: 39 dBm Matched to 50 operation Bias condition: 7 V The a 2-stage PHEMT MMIC power amplifier. It is designed for use in low cost, high volume, 2.9 -3.7 GHz band applications. The MMIC is matched to 50 operation. It provides a typical gain 26 dB and P1dB power of more than 30 dBm. Typical.

CP53-6R8B : IFT Coils. Inductance range:800H Max., reference unloaded Q:50 Operating Frequency:15MHz Max. In addition to the reference versions of parameters shown here, custom designs are available to meet your exact requirements. Feature Low profile variable type of tight-space design Ideally used in automotive tuner units of high reliabilities. RoHS Compliance Dimension.

CD4FA911FO3F : 910pF Mica And Ptfe Capacitor Radial 100V; CAP 910PF 100V MICA RADIAL. s: Capacitance: 910pF ; Voltage - Rated: 100V ; Tolerance: 1% ; : RF, High Frequency ; Dielectric Material: Mica ; Operating Temperature: -55C ~ 125C ; Lead Spacing: 0.098" (2.50mm) ; Mounting Type: Through Hole ; Package / Case: Radial ; Packaging: Bulk ; Lead Free Status: Lead.

MPC8271CVRTIEA : Microprocessors (MPU) 400 MHz 760 MIPS. s: Manufacturer: Freescale Semiconductor ; Product Category: Microprocessors (MPU) ; RoHS:  Details ; Processor Series: MPC8xxx ; Core: 603e ; Data Bus Width: 32 bit ; Maximum Clock Frequency: 400 MHz ; Operating Supply Voltage: 1.4 V to 1.6 V ; Maximum Operating Temperature: + 105 C ; Mounting Style: SMD/SMT.

PIC16C62BT-20I/ML : Embedded - Microcontroller Integrated Circuit (ics) External Tape & Reel (TR) 4 V ~ 5.5 V; IC MCU OTP 2KX14 28-QFN. s: Program Memory Size: 3.5KB (2K x 14) ; RAM Size: 128 x 8 ; Number of I /O: 22 ; Package / Case: 28-VQFN Exposed Pad ; Speed: 20MHz ; Oscillator Type: External ; Packaging: Tape & Reel (TR) ; Program Memory Type: OTP ; EEPROM.

1372-2 : Gold Swage Terminal - Pc Pin Connectors, Interconnect Single End; PIN MICRO .082"DIA SWAGE MNT AU. s: Contact Finish: Gold ; Flange Diameter: 0.050" (1.27mm) ; Length: 0.132" (3.35mm) ; Pin Diameter: 0.020" (0.51mm) ; Type: Single End ; Hole Diameter: 0.031" (0.79mm) ; Mounting Type: Swage ; Contact Finish Thickness: 10in (0.25m) ; Lead Free Status:.

LTC1755EGN#TR : Interface - Specialized Integrated Circuit (ics) Tape & Reel (TR) 2.7 V ~ 6 V; IC SMART CARD INTERFACE 24SSOP. s: Applications: Smart Card ; Interface: - ; Voltage - Supply: 2.7 V ~ 6 V ; Package / Case: 24-SSOP (0.154", 3.90mm Width) ; Packaging: Tape & Reel (TR) ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant.

FMBM5551_SB16001 : Transistor (bjt) - Single Discrete Semiconductor Product 600mA 160V 700mW NPN; TRANSISTOR NPN 160V 600MA SSOT-6. s: Transistor Type: NPN ; Voltage - Collector Emitter Breakdown (Max): 160V ; Current - Collector (Ic) (Max): 600mA ; Power - Max: 700mW ; DC Current Gain (hFE) (Min) @ Ic, Vce: 80 @ 10mA, 5V ; Vce Saturation (Max) @ Ib, Ic: 200mV @ 5mA,.

0280-2-17-01-06-14-02-0 : BERYLLIUM COPPER, GOLD (30) OVER NICKEL FINISH, PCB TERMINAL. s: Terminal Type: PCB TERMINAL ; Material: Copper ; : RoHS.

CTDD2727DF-1205-S1K-5 : 1-OUTPUT 5 W DC-DC REG PWR SUPPLY MODULE. s: Package Type: Other, ROHS COMPLIANT PACKAGE-4 ; Output Voltage: 4.85 to 5.15 volts ; Input Voltage: 9 to 18 volts ; Output Power: 5 watts (0.0067 HP) ; Operating Temperature: -40 to 71 C (-40 to 160 F).

6L250-00084 : 2000 MHz, LOW PASS FILTER. s: Filter Type: Low Pass ; Fc: 2000 MHz ; Insertion Loss: 1 dB ; VSWR: 1.5 1 ; Package Type: PANEL MOUNT.

 
0-C     D-L     M-R     S-Z