Details, datasheet, quote on part number: OP97FSZ-REEL7
PartOP97FSZ-REEL7
Category
TitleIC OPAMP GP 900KHZ 8SOIC
Description

ADI’s OP97 is a low-power op amp that utilizes only 600 μA of supply current with an ultra-low offset voltage of 25 μV. This op amp has outstanding PSR and takes wide voltage supply range from ±2 V to ±20 V. The OP97 comes in either an 8-PDIP or an 8-SOIC package and has an operational range of -40°C to +85°C. The OP97 is ideal for high precision low-power applications.



CompanyAnalog Devices
DatasheetDownload OP97FSZ-REEL7 datasheet
Quote
Find where to buy
 
  
OP97FSZ-REEL7 photo

Others parts numbering
OP97FSZ
OP97FPZ: IC OPAMP GP 900KHZ 8DIP
OP97EPZ
OP97FSZ-REEL

 

Features, Applications
FEATURES

Low supply current: 600 A maximum OP07 type performance Offset voltage: 20 V maximum Offset voltage drift: 0.6 V/C maximum Very low bias current 100 pA maximum 250 pA maximum High common-mode rejection: 114 dB minimum Extended industrial temperature range: to +85C

The is a low power alternative to the industry-standard OP07 precision amplifier. The OP97 maintains the standards of performance set by the OP07 while utilizing only 600 A supply current, less than 1/6 that an OP07. Offset voltage is an ultralow 25 V, and drift over temperature is below 0.6 V/C. External offset trimming is not required in the majority of circuits. Improvements have been made over OP07 specifications in several areas. Notable is bias current, which remains below 250 pA over the full military temperature range. The OP97 is ideal for use in precision long-term integrators or sample-andhold circuits that must operate at elevated temperatures. Common-mode rejection and power supply rejection are also improved with the 114 dB minimum over wider ranges of common-mode or supply voltage. Outstanding PSR, a supply range specified from 20 V, and the minimal power requirements of the OP97 combine to make the OP97 a preferred device for portable and battery-powered instruments. The OP97 conforms to the OP07 pinout, with the null potentiometer connected between Pin 1 and Pin 8 with the wiper to V+. The OP97 upgrades circuit designs using OP07, OP12, and PM1012 type amplifiers. It may replace 741type amplifiers in circuits without nulling or where the nulling circuitry has been removed.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.461.3113 19972009 Analog Devices, Inc. All rights reserved.

OP97 Material Declaration PCN-PDN Information Quality And Reliability Symbols and Footprints

Application Notes AN-649: Using the Analog Devices Active Filter Design Tool Data Sheet OP97: Military Data Sheet OP97: Low Power, High Precision Operational Amplifier Data Sheet

Submit a technical question or find your regional support number.
Analog Filter Wizard Analog Photodiode Wizard

This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.

Features.............................................................................................. 1 Pin Connections............................................................................... 1 General Description......................................................................... 1 Revision History............................................................................... 2 Specifications..................................................................................... 3 Electrical Characteristics............................................................. 3 Absolute Maximum Ratings............................................................ 5 Thermal Resistance...................................................................... 5 ESD Caution...................................................................................5 Typical Performance Characteristics..............................................6 Application Information................................................................ 11 AC Performance............................................................................. 12 Guarding and Shielding................................................................. 13 Outline Dimensions....................................................................... 15 Ordering Guide.......................................................................... 16

F to Rev. G Changes to Figure 20 and Figure 23............................................... 9 Changes to Figure 26 and Figure 27............................................. 10 Updated Outline Dimensions....................................................... 15 Changes to Ordering Guide.......................................................... E to Rev. F Updated Format.................................................................. Universal Changes to Ordering Guide.......................................................... D to Rev. E Deleted H-08A.................................................................... Universal Deleted Q-8......................................................................... Universal Deleted E-20A..................................................................... Universal Deleted Die Characteristics............................................................. 4 Deleted Wafer Test Limits............................................................... 4 Updated TPC 14............................................................................... 5 Updated Outline Dimensions....................................................... C to Rev. D Edits to Absolute Maximum Ratings..............................................3 Edits to Ordering Guide...................................................................3 Deleted DICE Characteristics..........................................................3 Deleted Wafer Test Limits................................................................3 Edits to Applications Information...................................................7


 

Some Part number from the same manufacture Analog Devices
OP97FSZ

ADI’s OP97 is a low-power op amp that utilizes only 600 μA of supply current with an ultra-low offset voltage of 25 μV. This op amp has outstanding PSR and takes wide voltage supply range

OP97FPZ
OP97EPZ
OP97FSZ-REEL
EV1HMC8500LP5D

Analog Devices HMC8500 RF Amplifiers are gallium nitride (GaN), broadband power amplifiers. The amplifiers deliver >10W with up to 55% power added efficiency (PAE) and 1.0dB typical gain flatness

HMC8500LP5DE
HMC8500LP5DETR
AD8307ARZ-REEL

ADI’s AD8307 is a logarithmic amplifier in an 8-PDIP and 8-SOIC package. These amplifiers can take voltage input from 2.7 V to 5.5 V with a very low 7.5 mA of current needed. A fast-acting CMOS-compatible

AD8307ARZ
AD8307AR
AD8307ARZ-RL7
AD8307ANZ
AD8307AR-REEL
AD8307AR-REEL7
HMC8191 HMC8191 is a passive wideband I/Q MMIC mixer that can be used either as an image reject mixer for receiver operations or as single sideband upconverter for transmitter operations. With RF and LO range
HMC1063 The HMC1063LP3E is a compact I/Q MMIC mixer in a leadless Pb free SMT package, which can be used as either an Image Reject Mixer or a Single Sideband Upconverter. The mixer utilizes two standard Hittite
HMC8325 The HMC8325 is an integrated E-band gallium arsenide (GaAs), monolithic microwave integrated circuit (MMIC), low noise amplifier (LNA) chip that operates from 71 GHz to 86 GHz. The HMC8325 provides 21 dB of gain,
AD7142ACPZ-1500RL7
AD7142ACPZ-1REEL
AD7142ACPZ-500RL7
AD7147A-1ACBZ500R7
Same catergory

ABR808 : Avalanche Bridge Rectifiers. High case dielectric strength High surge current capability High reliability Low reverse current Low forward voltage drop ldeal for printed circuit board * Case : Reliable low cost construction utilizing molded plastic technique * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL - STD 202 , Method 208 guaranteed * Polarity.

SN54HC4060J : 14-stage Asynchronous Binary Counters And Oscillators. Allow Design of Either RC or Crystal Oscillator Circuits Package Options Include Plastic Small-Outline (D) and Ceramic Flat (W) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPs The 'HC4060 consist of an oscillator section and 14 ripple-carry binary counter stages. The oscillator configuration allows design.

SN74LVC2G79 : Dual Positive-edge-triggered D-type Flip-flop. NanoStar and NanoFree Packages Supports 5-V VCC Operation Inputs Accept Voltages 5.5 V Max tpd 3.3 V Low Power Consumption, 10-A Max ICC 24-mA Output Drive 3.3 V Typical VOLP (Output Ground Bounce) V at VCC = 25C Typical VOHV (Output VOH Undershoot) V at VCC = 25C Ioff Feature Supports Partial-Power-Down Mode Operation Latch-Up Performance Exceeds.

P2013E : Internationally Approved Toggles. International certifications from UL, CSA, VDE, SEMKO, and SEV. High torque bushing construction prevents rotation or separation from frame during installation. Stainless steel frame resists corrosion and increases environmental safety. Case/base of heat resistant resin meets UL94V-0 flammability standard. Contacts of special silver alloy resist arcing.

DNM04S0A0R06NFD : Delphi DNS, Non-isolated Point of Load Dc/dc Power Modules: 2.8-5.5vin, 0.75-3.3v/6aout.

MAX6638ATC : Temperature Monitor with Dual Serial Interface. Temperature Monitor with Dual Serial Interface The MAX6638 thermal-management sensor includes internal (local) and external (remote) digital temperature sensors and two independent SMBusTM serial ports. The remote temperature accuracy is 1.0C, and the local temperature accuracy is 2C. The MAX6638 also extended temperature resolution data available.

MC10117_02 : Dual 2-wide 2-3-input Or-and/or-and Gate. ORAND/ORANDInvert gate. This general purpose logic element is designed for use in data control, such as digital multiplexing or data distribution. Pin 9 is common to both gates. 100 mW typ/pkg (No Load) tpd 2.3 ns typ tr, 2.2 ns typ (20%80%) = Assembly Location = Wafer Lot = Year = Work Week Device MC10117L Package PDIP16 PLCC20 Shipping 25 Units.

AAT 5101 : 2.5W Mono Filter-Free Class D Audio Power Amplifier Audio The AAT5101 is a high efficiency, 2.5W mono class D audio power amplifier. The low noise, filterless PWM architecture eliminates the output filter, reduces the external component count and system cost, and simplifies system design. With high efficiency of up to 92% and the industry lowest 1.35mA.

2845/7 SL005 : Wire - Single Conductor 22AWG 7/30 PTFE 100ft SPOOL GRAY. Alpha Wire offers single conductor hookup wire in 16 - 30AWG with a 300V rating and operating temperatures from -40ºC up to 80º, 90º, and 105ºC. RoHS compliant, the stranded or solid tinned copper hookup wire has many insulation options to meet various temperature and color.

SPC21872 : Self-Tapping Screw.

PIC18F45K22-I/ML : Microcontrollers (MCU) 32KB Flash 1536B RAM 8B nanoWatt. » » » » MCUs MCUs for Digital Thermometer Digital thermometers measure body temperature over a small temperature range centered around 37°C. Digital thermometers provide faster, more convenient measurements and also eliminate the environmental hazard of mercury in legacy.

6-104118-2 : Gold Through Hole, Right Angle Board To Board - Headers, Male Pin Connectors, Interconnect Unshrouded; CONN HEADER 40POS DUAL R/A GOLD. s: Color: Black ; Connector Type: Unshrouded ; Contact Finish: Gold ; Contact Finish Thickness: 30in (0.76m) ; Contact Mating Length: 0.125" (3.18mm) ; : - ; Height Stacking (Mating): - ; Mounting Type: Through Hole,.

VSSR2401682JTF : Resistor 6.8K Ohm 100mW 23 Resistors[number of pins] Pin Networks, Arrays; RES ARRAY 6.8K OHM 23 RES LSSOP. s: Resistance (Ohms): 6.8K ; Tolerance: 5% ; Power Per Element: 100mW ; Circuit Type: Bussed ; Number of Pins: 24 ; Packaging: Tape & Reel (TR) ; Number of Resistors: 23 ; Package / Case: 24-LSSOP (0.154", 3.90mm Width) ; Mounting Type: Surface.

D37P33E6GL00LF : Gold, GXT Through Hole, Right Angle D-sub Connectors, Interconnect Plug, Male Pins; DSUB R/A STB 37POS PIN. s: Connector Type: Plug, Male Pins ; Contact Finish: Gold, GXT ; : Board Lock, Grounding Indents ; Flange Feature: Housing/Shell (M3) ; Mounting Type: Through Hole, Right Angle ; Number of Positions: 37 ; Number of Rows: 2 ; Termination: Solder.

SS-5GL13D : SPDT Snap Action, Limit, Lever Switch On-Mom 50gf; SWITCH 5A LEVER PC MNT 50GF. s: Mounting Type: Through Hole ; Termination Style: PC Pin ; Actuator Type: Lever, Simulated Roller ; Operating Force: 50gf ; Switch Function: On-Mom ; Circuit: SPDT ; Contact Rating @ Voltage: 5A @ 125VAC ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

LP4EE1RBATG : DPDT Pushbutton Switch On-On 100mA (DC); SWITCH PUSH DPDT 0.1A 30V. s: Type: Standard, Illuminated ; Circuit: DPDT ; Switch Function: On-On ; Current Rating: 100mA (DC) ; Voltage Rating - AC: - ; Voltage Rating - DC: 30V ; Actuator Type: Square, Button ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

HN1B01F-GR : 150 mA, 50 V, 2 CHANNEL, NPN AND PNP, Si, SMALL SIGNAL TRANSISTOR. s: Polarity: Complementary ; Package Type: 2-3N1A, SM6, 6 PIN.

S10A05HE : 15 A, SILICON, BRIDGE RECTIFIER DIODE. s: Diode Type: BRIDGE RECTIFIER DIODE ; Diode Applications: Rectifier ; IF: 150000 mA ; Pin Count: 4 ; Number of Diodes: 4.

925061-3 : 20 CONTACT(S), MALE, MULTIWAY RACK AND PANEL CONN. s: Connector Type: MULTIWAY RACK AND PANEL CONN ; Gender: Male ; Number of Contacts: 20 ; RoHS Compliant: RoHS.

 
0-C     D-L     M-R     S-Z