Details, datasheet, quote on part number: TPS25741RSMT
PartTPS25741RSMT
CategorySemiconductors => Interface => USB => USB Type-C and Power Delivery
Part familyTPS25741 USB Type-C™ Rev 1.2 and USB PD Source Controllers
TitleIC PD CTLR USB TYPE-C 32VQFN
DescriptionUSB Type-C™ Rev 1.2 and USB PD Source Controllers 32-VQFN -40 to 125
CompanyTexas Instruments Inc.
StatusACTIVE
ROHSY
SampleYes
DatasheetDownload TPS25741RSMT datasheet
Specifications 
Alternate ModeNo
Package GroupVQFN
RatingCatalog
Approx. Price (US$)1.20 | 1ku
Power RoleSource
Operating Temperature Range(C)-40 to 125
Internal Power Path5V 600mA VCONN
External Power Path ControlNFET,PFET
USB Speed(Mbps)N/A
Realtime VBUS monitoringYes
ConfigurationN/A
Dead Battery SupportNo
Iq(Typ)(uA)8
Policy ManagerIntegrated
FunctionCC Controller,PD Controller
Data RoleDFP
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
32RSMVQFNS-PQFP-N250SMALL T&R25741 44.9.4
Application notes
• TPS25741 Power Multiplexing Introduction and Design Considerations | Doc
Evaluation Kits
TPS25741EVM-802: TPS25741 Evaluation Module with Power Multiplexer and Port Power Management Capabilities
Spice Model
TPS25741 PSpice Transient Model - ZIP (07/29/2016)

Others parts numbering
TPS25741ARSMT
TPS25741ARSMR
Some Part number from the same manufacture Texas Instruments Inc.
TPS25741ARSMT

Texas Instruments' TPS25741/TPS25741A implements a source compliant to USB power delivery 2.0 and USB Type-C Revision 1.2. It can be used in either a power mux or DC-DC implementation.



TPS25741ARSMR
DAC38RF83IAAV Specifications: Series: DAC38RF83 ; Resolution: 14 bit ; Sampling Rate: 9 GS/s ; Number of Channels: 2 Channel ; Settling Time: 1 ns ; Interface Type: JESD204B ; Supply Voltage - Max: 1.8 V ; Supply Voltage
DAC38RF93IAAV Specifications: Series: DAC38RF93 ; Resolution: 14 bit ; Sampling Rate: 9 GS/s ; Number of Channels: 2 Channel ; Settling Time: 1 ns ; Interface Type: Serial ; Supply Voltage - Max: 2.45 V ; Supply Voltage
DAC38RF93IAAVR
DAC38RF83IAAVR Specifications: Series: DAC38RF83 ; Resolution: ; Sampling Rate: ; Number of Channels: ; Settling Time: ; Interface Type: ; Supply Voltage - Max: ; Supply Voltage - Min: ; Maximum Operating Temperature:
DAC8775IRWFT Specifications: Series: DAC8775 ; Resolution: 16 bit ; Sampling Rate: - ; Number of Channels: 4 Channel ; Settling Time: 10 us ; Interface Type: SPI ; Supply Voltage - Max: 36 V ; Supply Voltage - Min:
DAC8775IRWFR

CD74HC27M96 : ti CD74HC27, High Speed CMOS Logic Triple 3-Input NOR GATEs

PT6515F : 1.2V 8A, 3.3/5-V Input Adjustable Isr With Short-circuit Protection

SN54LVT244BJ : 3.3-v Abt Octal Buffers/drivers With 3-state Outputs

SN74ALS666DW : D-Type (3-State) Latches ti SN74ALS666, Octal D-type Transparent Read-back Latches With 3-State Outputs

SN74AUC2GU04YZPR : Dual Inverter Gate

TL497AD : Switching Voltage Regulators

TPA5050RSATG4 : The TPA5050 accepts a single serial audio input, buffers the data for a selectable period of time, and outputs the delayed audio data on a single serial output. One device allows delay of up to 170 ms/ch (fs = 48 kHz) to synchronize the audio stream to the video stream in systems with complex video

CC2531 : CC2531F256 System-on-Chip Solution For IEEE 802.15.4 And ZigBee Applications The CC2531 is a USB enabled true system-on-chip (SoC) solution for IEEE 802.15.4, Zigbee and RF4CE applications. It enables USB dongles or USB upgradable network nodes to be built with low total bill-of-material costs. The

TLE202X-Q1 : Excalibur High-speed Low-power Precision Operational Amplifiers

SN74HCT02DE4 : DUAL D-type Positive-edge-triggered Flip-flops WITH Clear AND Preset

TLV320AIC21CPFBG4 : IC, AUDIO CODEC, 16BIT, 26KHZ, TQFP-48 Specifications: Audio CODEC Type: Stereo ; No. of ADCs: 2 ; No. of DACs: 2 ; No. of Input Channels: 5 ; No. of Output Channels: 4 ; ADC / DAC Resolution: 16bit ; ADCs / DACs Signal to Noise Ratio: 92dB ; Sampling Rate: 26kSPS ; IC Interface Type: I2C, Serial ; Supply Voltage Range: 2.7V to 3.6V, 1.6

TPS61200 : 0.3V Input Voltage Boost Converter with 1.3A Switches and 'Down Mode' in 3x3 QFN The TPS6120x devices provide a power supply solution for products powered by either a single-cell, two-cell, or three-cell alkaline, NiCd or NiMH, or one-cell Li-Ion or Li-polymer battery. It is also used in fuel cell or solar cell powered devices where the capability of handling low input voltages

 
0-C     D-L     M-R     S-Z