|Title||VARISTOR 175V 2A 0603|
AVX Antenna PowerGuard AP series of advanced varistor products are the ultra-low capacitance extension of the very popular AG series AntennaGuard. The AP series offers tighter capacitance tolerance and improved ESD energy ratings. Designed for use in RF circuits, sensors, high-speed lines, optic circuits, and capacitance sensitive applications. The AP series is available in 1.5 pF, 2.0 pF, and 3.3 pF with cap tolerances as tight as +0.5 pF. These tight tolerances give the designers confidence that their circuits will always perform the same from batch to batch while fully maintaining signal integrity.
|Datasheet||Download VCAS06AP182R0LAT1A datasheet
|Others parts numbering|
|VCAS04AP181R5DATWA: VARISTOR 180V 1A 0402|
|VCAS04AP182R0LATWA: VARISTOR 110V 1A 0402|
|VCAS04AP301R5DATWA: VARISTOR 180V 1A 0402|
|VCAS06AP243R3LAT1A: VARISTOR 120V 3A 0603|
|VCAS06AP303R3LAT1A: VARISTOR 120V 3A 0603|
TransGuard®.5-13 TransGuard® Automotive Series.14-23 StaticGuard.24-26 StaticGuard Automotive Series.27-29 Miniature 0201 MLV.30-31 MultiGuard Array Varistors.32-36 UltraGuard Low Leakage Varistors.37-39 Communication Bus Varistors.40-43 USB Series Low Capacitance Varistors.44-47 AntennaGuard Low Capacitance Varistors.48-51 AntennaGuard Automotive Series Low Capacitance Varistors.52-54 Antenna PowerGuard Low Capacitance Varistors.55-57 AntennaGuard/Sub pF AG Series Ultra-Low Capacitance Varistors.58-59 Sub pF AG Automotive Series Ultra-Low Capacitance Varistors.60-62 Controlled Capacitance Varistors.63-64 Miniature AC Varistors - MAV Series.65-67 Glass Encapsulated TransGuard®.68-69 Glass Encapsulated TransGuard® Automotive Series.70-71 High Temperature Automotive Series Varistors.72-73 High Temperature Low Leakage Automotive Series Varistors.74-75 Radial Leaded Automotive TransGuard®.76-77 Radial Leaded High Temperature Automotive TransGuard®.78-79 Radial CapGuardTM Max Capacitance Varistors.80-81 Surface Mount CapGuardTM.82-83 Axial TransGuard® and StaticGuard.84-85 TransFeed.86-92 TransFeed Automotive Series.93-97 SnPb Multilayer Varistors.98-99 Glass Encapsulated MLV.100-111
IEC-61000-4 Requirements.130-131 Turn On Time Characteristics of AVX Multilayer Varistor.132-133 The Impact of ESD on Insulated Portable Equipment.134-135 AVX TransGuard Motor and Relay Application Study.136-138 AVX Multilayer Varistors in Automobile MUX Bus Applications.139-140
NOTICE: Specifications are subject to change without notice. Contact your nearest AVX Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all applications.
The AVX TransGuard® Varistors - Transient Voltage Suppressors (TVS) with unique high-energy multilayer construction represent state-of-the-art overvoltage circuit protection. Monolithic multilayer construction provides protection from voltage transients caused by ESD (e.g. IEC 61000-4-2), lightning, inductive switching, automotive related transients such as load dump (ISO 7637-2-5), jump start with and other automotive transients (e.g. ISO 7637 Pulse 1-3, AEC-Q200-002, ISO 10605, ISO CI-220, CI-260) and more. AVX varistors provide bi-directional transient voltage protection in the on-state and EMI/RFI attenuation in the off-state which allows designers to combine the circuit protection and EMI/RFI attenuation function into a single highly reliable device. Parts are designed for use in temperatures from +125°C (+150°C components available) with no derating, exhibit very fast response, multiple strikes capability and high reliability. In addition, AVX automotive series varistors are AEC-Q200 qualified. AVX Varistors are provided in different mounting options, covering wide range of applications requirements. Surface mount varistors are available in single element or multiple element (array) EIA industry standard packages. The parts are RoHS compliant and offer excellent solderability thanks Barrier/100% Sn termination; Pd/Ag parts for hybrid assembly are also available as option upon request. AVX also offers SnPb termination as a special option. Thru-hole components are supplied as conformally epoxy coated axial and radial devices and are RoHS compliant.
SMT - 3220, Axial and Radial configuration Bi Directional transient voltage protection EMI Filtering in the off-state Very fast response 1ns) Multiple strikes capability High reliability No derating over operating temperature range +125°C (+150°C components available) High peak current and high energy options Low capacitance parts for RF, high speed data lines and capacitance sensitive applications AEC-Q200 qualified automotive series RoHS CompliantAPPLICATIONS
AVX Varistors are used in wide range of application sectors such as: Automotive Consumer Home appliances Automation Lighting Industrial/Professional Medical Renewable/Smart Energy MilitaryDIODE PROTECTION METHOD THREE COMPONENT SOLUTION TVS + EMI
|Some Part number from the same manufacture AVX Corporation|
AVX Antenna PowerGuard AP series of advanced varistor products are the ultra-low capacitance extension of the very popular AG series AntennaGuard. The AP series offers tighter capacitance tolerance
1825SA471MAT1A : 470pF Ceramic Capacitor 1825 (4564 Metric) 1500V (1.5kV); CAP CER 470PF 20% 1500V C0G 1825 Specifications: Capacitance: 470pF ; Voltage - Rated: 1500V (1.5kV) ; Tolerance: ±20% ; Package / Case: 1825 (4564 Metric) ; Temperature Coefficient: C0G, NP0 ; Packaging: Tape & Reel (TR) ; Features: High Voltage ; Lead Spacing: - ; Operating Temperature: -55°C ~ 125°C ; Mounting Type: Surface
SQCB7M820FATME\500 : 82pF Ceramic Capacitor 1111 (2828 Metric) 500V; CAP CER 82PF 500V 1% 1111 Specifications: Capacitance: 82pF ; Voltage - Rated: 500V ; Tolerance: ±1% ; Package / Case: 1111 (2828 Metric) ; Temperature Coefficient: M ; Packaging: Tape & Reel (TR) ; Features: High Q, Low Loss ; Lead Spacing: - ; Operating Temperature: -55°C ~ 175°C ; Mounting Type: Surface Mount, MLCC ;
208484060005025 : Gold Through Hole Backplane - Din 41612 Connectors, Interconnect Receptacle, Female Sockets; CONNECTOR RECEPT 60POS STR Specifications: Connector Type: Receptacle, Female Sockets ; Number of Rows: 3 ; Style: M ; Mounting Type: Through Hole ; Features: - ; Packaging: Bulk ; Pitch: 0.100" (2.54mm) ; Contact Finish: Gold ; Number of Positions Loaded: 60 ; Level, Class: 2 ; Termination: Press-Fit ; Contact Finish Thickne
CH527A823JA30A4 : CAPACITOR, CERAMIC, MULTILAYER, 500 V, C0G, 0.082 uF, THROUGH HOLE MOUNT Specifications: Configuration / Form Factor: Leaded Capacitor ; Technology: Multilayer ; Dielectric: Ceramic Composition ; Capacitance Range: 0.0820 microF ; Capacitance Tolerance: 5 (+/- %) ; WVDC: 500 volts ; Temperature Coefficient: 30 ppm/Â°C ; Mounting Style: Through Hole ; Operating Temperatur
CWR29JB475JZECBULK : CAPACITOR, TANTALUM, SOLID, POLARIZED, 20 V, 4.7 uF, SURFACE MOUNT Specifications: Configuration / Form Factor: Chip Capacitor ; Applications: General Purpose ; Electrolytic Capacitors: Tantalum ; RoHS Compliant: Yes ; Features: Polarized ; Capacitance Range: 4.7 microF ; Capacitance Tolerance: 5 (+/- %) ; WVDC: 20 volts ; Mounting Style: Surface Mount Technology ;
TBJB475K015CBSC0845 : CAPACITOR, TANTALUM, SOLID, POLARIZED, 16 V, 4.7 uF, SURFACE MOUNT, 1411 Specifications: Configuration / Form Factor: Chip Capacitor ; General Features: Polarized ; Capacitance Range: 4.7 microF ; Capacitance Tolerance: 10 (+/- %) ; WVDC: 16 volts ; Leakage Current: 0.7000 microamps ; Mounting Style: Surface Mount Technology ; EIA Case Size: 1411 ; Operating Temperature:
TRJG105K010R : CAPACITOR, TANTALUM, SOLID
VCUG060005L1RX : BIDIRECTIONAL, SILICON, TVS DIODE Specifications: Configuration: Single ; Direction: Bidirectional ; Pin Count: 2 ; Number of Diodes: 1 ; RoHS Compliant: RoHS
04021J1R1PBSTR\500 : Multilayer Ceramic Capacitors MLCC - SMD/SMT 100V 1.1pF ThFlm0402 .02pF Tol AVX Accu-P® Series Thin Film Capacitors offer enhanced RF power handling capability and improved mechanical characteristics. In addition, the Accu-P® Series Thin Film Capacitors also exhibit minimal batch-to-batch variability of parameters at high frequency, low ESR, high Q, and very low capacita
74ALVCH162268 : 3.3V CMOS 12-BIT to 24-BIT Registered Bus Exchanger With 3-STATE Outputs And Bus-hold.
BYV26 : IF(A) = 1 ;; Ifsm (A) = 30 ;; VRRM (V) = 200 1000. 1 Amp. Very Fast Soft Recovery Glass Passivated Avalanche Diode Mounting instructions 1. Min. distance from body to soldering point, 4 mm. 2. Max. solder temperature, 350 °C. 3. Max. soldering time, 3.5 sec. 4. Do not bend lead at a point closer than 2 mm. to the body. Glass Passivated Junction High current capability The plastic material carries U/L recognition.
IGA03N120H2 : Highspeed 2-technology. Designed for: TV Horizontal Line Deflection 2nd generation HighSpeed-Technology for 1200V applications offers: - loss reduction in resonant circuits - temperature stable behavior - parallel switching capability - tight parameter distribution - Eoff optimized for =3A - simple Gate-Control Complete product spectrum and PSpice Models : http://www.infineon.com/igbt/.
GQZJ6.8 : Surface Mount Zener Diodes. Case: Molded Glass QUARDRO-MELF Terminals: Solderable per MIL-STD-202E, Method 208 Polarity: See Diagram Below Approx. Weight: 0.03 grams Mounting Position: Any Packing information T/R - 2.5K per 7" plastic Reel Parameter Power Dissipation at Tamb = 25 Junction Temperature Storage Temperature Range Valid provided that leads at a distance of 10mm from.
6639 : Precision Potentiometer. Essentially infinite resolution Excellent rotational life High quality, rugged construction General purpose applications Non-standard available Cost and space saving Electrical Characteristics1 6539 Servo Mount 6639 Bushing Mount Product Dimensions Standard Resistance 100 K ohms Total Resistance %.±15 % Independent %.±2.0 % Effective Electrical Angle.340.
PN11SHSA03QE : Alternate & Momentary Action Pushbutton Switches. C&K PN Series Alternate & Momentary Action Pushbutton Switches /Benefits Momentary or locking action 3 actuation forces for customized feel Low cost, reliable contact design 1-4 poles available RoHS compliant Typical Applications Computers and peripherals Instrumentation and measurement equipment Non-power, on-off switch applications s CONTACT RATING:.
MB661XXX : CMOS Gate Array.
CS9LARI : Ultra HF Clock Oscillator, Pecl, +3.3 VDC or +2.5vdc. : A crystal controlled, high frequency, highly stable oscillator, adhering to Positive Emitter Coupled Logic (PECL) Standards and fundamental crystal or analog multiplication technologies. The output can be Tri-stated to facilitate testing or combined multiple clocks. The device is contained in a sub-miniature, very low profile, leadless ceramic SMD package.
1522118 : Round Accessory Industrial Controls, Meter; CABLE 6POS M8 PLUG-WIRE 5M. s: Cable Type: Round ; Connector Type: Circular 06 pos Female to Wire Leads ; Length: 16.40' (5m) ; Color: Black ; Usage: Panel Mount, Industrial ; Shielding: Unshielded ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.
L77DE09SF179A : D-Subminiature Connectors D-SUB. s: Manufacturer: Amphenol ; Product Category: D-Subminiature Connectors ; RoHS: Details ; Product: Standard Hoods & Connectors ; Number of Positions / Contacts: 9 ; Current Rating: 7.5 A ; Contact Plating: Gold ; Shell Plating: Tin ; Shell Size: E ; Gender: Female ; Mounting Style: Panel ; Mounting Angle: Straight.
5500.2041 : FILTER, 6A, CHASSIS. s: Filter Type: EMI / RFI ; Current Rating: 6A ; Voltage Rating: 250V ; Leakage Current Max: - ; Capacitance: 15000pF ; Inductance Min: 800µH ; Termination Type: -.
71AD30-02-1-AJN : SWITCH, ROTARY, SP12T, 300mA, 115V. Performance and Value Leader Molded-In Position Terminals Choice of Shaft/Bushing Diameters 30° and 36° Angles of Throw DIMENSIONS: Standard and Military In inches (and millimeters) 30° and 36° Angle of Throw may be interposed on either shaft diameter. Approx. Weight Grams Approx. Weight Grams All dimensions not shown are the same as above. Note: Common.
S5B-PH-SM4-TB(LF)(SN) : Tin Surface Mount, Right Angle Rectangular - Headers, Male Pin Connectors, Interconnect Header, Shrouded; CONN HEADER PH SIDE 5POS 2MM SMD. s: Color: Natural ; Connector Type: Header, Shrouded ; Contact Finish: Tin ; Contact Mating Length: - ; : Solder Retention ; Mounting Type: Surface Mount, Right Angle ; Number of Positions Loaded: All ; Number of Rows:.
LTC2600IGN#TRPBF : Data Acquisition - Digital To Analog Converter (dac) Integrated Circuit (ics) Tape & Reel (TR) Single Supply; IC DAC OCTAL R-R 16BIT 16SSOP. s: Data Interface: Serial ; Number of Bits: 16 ; Operating Temperature: -40°C ~ 85°C ; Package / Case: 16-SSOP (0.154", 3.90mm Width) ; Packaging: Tape & Reel (TR) ; Voltage Supply Source: Single Supply.
SY89846UMG : Clock/timing - Clock Buffers, Driver Integrated Circuit (ics) Fanout Buffer (Distribution), Multiplexer Tube 2.375 V ~ 3.6 V; IC FANOUT BUFFER LVPECL 32-MLF. s: Type: Fanout Buffer (Distribution), Multiplexer ; Frequency - Max: 2GHz ; Input: CML, LVDS, PECL ; Output: LVPECL ; Voltage - Supply: 2.375 V ~ 3.6 V ; Package / Case: 32-VFQFN Exposed Pad,.
D38999/24WJ7PA : Aluminum, Olive Drab Cadmium Plated Panel Mount, Bulkhead - Front Side Nut Circular Connectors, Interconnect Receptacle, Male Pins; CONN RCPT 99POS JAM NUT W/PINS. s: Connector Type: Receptacle, Male Pins ; Shell Size - Insert: 25-7 ; Mounting Type: Panel Mount, Bulkhead - Front Side Nut ; Fastening Type: Threaded ; : Shielded ; Packaging: Bulk ; Number.
C300KR40E : 0.4 Ohm 300W Chassis Mount Resistors; RES .40 OHM 300W WIREWOUND. s: Resistance (Ohms): 0.4 ; Power (Watts): 300W ; Composition: Wirewound ; : - ; Temperature Coefficient: ±400ppm/°C ; Tolerance: ±10% ; Size / Dimension: 1.125" Dia x 8.500" L (28.58mm x 215.90mm) ; Height: - ; Coating, Housing Type: Vitreous Enamel Coated ; Mounting Feature: Brackets.
ERJ-14NF15R8U : 15.8 Ohm 0.5W, 1/2W Chip Resistor - Surface Mount; RES 15.8 OHM 1/2W 1% 1210 SMD. s: Resistance (Ohms): 15.8 ; Power (Watts): 0.5W, 1/2W ; Tolerance: ±1% ; Packaging: Digi-Reel® ; Composition: Thick Film ; Temperature Coefficient: ±100ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.
Si8641ED-B-IS : Isolator Interface IC Quad Ch 5.0kV Iso 150M 3/1 WB, DO=HI. Silicon Labs CMOS digital isolators are mixed-signal IC solutions that leverage Silicon Labs' superior isolation and high voltage expertise to enhance power system performance, flexibility, and reliability while reducing system size and cost. The entire isolation portfolio supports isolation.
VHP1-310 : 31000 MHz - 31800 MHz PARABOLIC ANTENNA, 36.8 dBi GAIN, 2.3 deg 3dB BEAMWIDTH. s: Primary Frequency Range: 31000.0 to 31800.0 MHz ; Gain: 36.8 dB ; VSWR: 1.2 1 ; Power: 0.2010 HP (0.1500 kwatts) ; Operating Temperature: -58 to 158 F (223 to 343 K).