Details, datasheet, quote on part number: QS3.241
PartQS3.241
Category
TitlePower Supply, 80W, 100-240VAC 1PH, 24-28VDC, 3.4-3A
Description
CompanyPULS, LP
DatasheetDownload QS3.241 datasheet
  
QS3.241 photo

Others parts numbering
QS5.241: Power Supply, 120W, 100-240VAC 1PH, 24-28VDC, 5-4.5A
QS10.121: Power Supply, 180W, 100-240VAC 1PH, 12-15VDC, 15-12A
QS10.241: Power Supply, 240W, 100-240VAC 1PH, 24-28VDC, 10-9A
QS10.481: Power Supply, 240W, 100-240VAC 1PH, 48-56VDC, 5-4.3A
QS20.241: Power Supply, 480W, 100-240VAC 1PH, 24-28VDC, 20-17.5A
QS20.481: Power Supply, 480W, 100-240VAC 1PH, 48-55VDC, 10-8.7A
QT20.241: Power Supply, 480W, 380-480VAC 3PH, 24-28VDC, 20-17.5A
QS40.241: Power Supply, 960W, 100-240VAC 1PH, 24-28VDC, 40-34.3A
QS40.481: Power Supply, 960W, 100-240VAC 1PH, 48-54VDC, 20-17.8A
QT40.241: Power Supply, 960W, 380-480VAC 3PH, 24-28VDC, 40-34.3A
CS3.241: Power Supply, 80W, 100-240VAC 1PH, 24-28VDC, 3.3-2.7A
CS5.241: Power Supply, 120W, 100-120 / 200-240VAC 1PH, 24-28VDC, 5-4.3A
CS10.241: Power Supply, 240W, 100-120 / 200-240VAC 1PH, 24-28VDC, 10-8.6A
CP10.121: Power Supply, 240W, 120-240VAC 1PH,12-15VDC, 16-12.8A
CP10.241: Power Supply, 240W, 120-240VAC 1PH, 24-28VDC, 10-8.6A
CP10.481: Power Supply, 259W, 120-240VAC 1PH, 48-56VDC, 5.4-4.6A
CT10.241: Power Supply, 240W, 380-480VAC 3PH, 24-28VDC, 10-9A
CPS20.121: Power Supply, 480W, 100-240VAC 1PH, 12-15VDC, 30-27A
CPS20.241: Power Supply, 480W, 100-240VAC 1PH, 24-28VDC, 20-17.5A
CPS20.481: Power Supply, 480W, 100-240VAC 1PH, 48-55VDC, 10-8.7A
PIC120.241D: Power Supply, 120W, 100-120 / 200-240VAC 1PH, 24-28VDC, 5-4.3A
PIC240.241D: Power Supply, 240W, 120-240VAC 1PH, 24-28VDC, 10-8.6A
ML15.051: Power Supply, 15W, 100-240VAC 1PH, 5-5.5VDC, 3A
ML15.121: Power Supply, 15W, 100-240VAC 1PH, 12-15VDC, 1.3-1A
ML15.241: Power Supply, 15W, 100-240VAC 1PH, 24-28VDC, 0.63-0.54A
ML30.100: Power Supply, 30W, 100-240VAC 1PH, 24-28VDC, 1.3-1.1A
ML30.101: Power Supply, 25W, 100-240VAC 1PH, 5-5.5VDC, 5-4.5A
ML30.102: Power Supply, 50W, 100-240VAC 1PH, 12-15VDC, 4.2-3.4A
ML30.241: Power Supply, 30W, 100-240VAC 1PH, 24-28VDC, 1.3-1.1A with Screw Terminals
ML30.106: Power Supply, 36W, 100-240VAC 1PH, ±12 or ±15VDC, 0-2.8A

 

Features, Applications

AC 100-240V Wide-range Input Width only 32mm Efficiency 150% (120W) Peak Load Capability Easy Fuse Tripping due to High Overload Current Negligible low Inrush Current Surge Short-term Operation down to 60Vac and to 300Vac Full Power Between -25C and +60C Quick-connect Spring-clamp Terminals 3 Year Warranty

The most outstanding features of this Dimension QSeries DIN-rail power supply are the high efficiency and the small size, which are achieved by a synchronous rectification and further novel design details. The QSeries is part of the Dimension family, existing alongside the lower featured C-Series. With short-term peak power capability of 150% and built-in large sized output capacitors, these features help start motors, charge capacitors and absorb reverse energy and often allow a unit of a lower wattage class to be used. High immunity to transients and power surges as well as low electromagnetic emission makes usage in nearly every environment possible. The integrated output power manager, a wide range input voltage design and virtually no input inrush current make installation and usage simple. Diagnostics are easy due to a green DC-ok LED and red overload LED. Unique quick-connect spring-clamp terminals allow a safe and fast installation and a large international approval package for a variety of applications makes this unit suitable for nearly every situation.

4.5A Output power 80W 120W Output ripple < 50mVpp Input voltage AC 100-240V Mains frequency 50-60Hz AC Input current / 0.82A Power factor 0.47 AC Inrush current typ. / 10A peak Efficiency / 90.0% Losses / 9.1W Temperature range to +70C Derating 2W/C Hold-up time typ. / 174ms Dimensions 32x124x102mm Output voltage Adjustment range Output current continuous for typ. 4s continuous for typ. / 230Vac operational / 230Vac WxHxD

Power Supply Accessory UF20.241 24-28V Standard unit Wall mount bracket Side mount bracket Redundancy module Buffer unit

Nov. 2011 / Rev. 2.1 DS-QS3.241-EN All parameters are specified 230Vac, 25C ambient and after a 5 minutes run-in time unless otherwise noted. www.pulspower.com Phone Germany

Page Intended Use.......................................................3 Installation AC-Input...............................................................4 DC-Input...............................................................5 Input Inrush Current...........................................5 Output.................................................................6 Hold-up Time.......................................................8 Efficiency and Power Losses................................9 Reliability...........................................................10 Functional Diagram...........................................11 Terminals and Wiring........................................11 Front Side and User EMC....................................................................13 Environment......................................................14 Protection Features...........................................15 Safety Features..................................................15 Dielectric Strength............................................15 Approvals...........................................................16 Fulfilled Standards............................................16 Used Substances................................................17 Physical Dimensions and Weight......................17 Page 22. Accessories........................................................ 22.1. ZM1.WALL Wall Mounting 22.2. ZM11.SIDE Side Mounting 22.3. UF20.241 Buffer 22.4. YRM2.DIODE Redundancy Module..........19 23. Application Notes............................................. 20 23.1. Repetitive Pulse Loading..........................20 23.2. Peak Current Capability...........................21 23.3. Back-feeding Loads..................................21 23.4. External Input Protection.........................21 23.5. Charging Batteries...............................22 23.6. Parallel Use to Increase Output Power....22 23.7. Parallel Use for Redundancy....................22 23.8. Daisy Chaining Outputs.......................23 23.9. Series Operation.......................................23 23.10. Inductive and Capacitive Loads................23 23.11. Operation on Two Phases........................24 23.12. Use in a Tightly Sealed Enclosure............24 23.13. Mounting Orientations............................25

The information presented in this document is believed to be accurate and reliable and may change without notice. No part of this document may be reproduced or utilized in any form without permission in writing from the publisher.

PE and T.b.d. AC 230V symbol PE is the abbreviation for Protective Earth and has the same meaning as the symbol This document uses the term "earth" which is the same as the U.S. term "ground". To be defined, value or description will follow later. A figure displayed with the or DC before the value represents a nominal voltage with standard tolerances (usually 15%) included. E.g.: DC 12V describes a 12V battery disregarding whether it is full (13.7V) or flat (10V) A figure with the unit (Vac) at the end is a momentary figure without any additional tolerances included. As long as not otherwise stated, AC 230V parameters are valid at 50Hz mains frequency. A key word indicating flexibility of choice with no implied preference. A key word indicating a mandatory requirement. A key word indicating flexibility of choice with a strongly preferred implementation. Earth, Ground

Nov. 2011 / Rev. 2.1 DS-QS3.241-EN All parameters are specified 230Vac, 25C ambient and after a 5 minutes run-in time unless otherwise noted. www.pulspower.com Phone Germany

This device is designed for installation in an enclosure and is intended for the general use such as in industrial control, office, communication, and instrumentation equipment. Do not use this power supply in aircraft, trains, nuclear equipment or similar systems where malfunction may cause severe personal injury or threaten human life. This device is designed for use in hazardous, non-hazardous, ordinary or unclassified locations.

This device may only be installed and put into operation by qualified personnel. This device does not contain serviceable parts. The tripping of an internal fuse is caused by an internal defect. If damage or malfunction should occur during installation or operation, immediately turn power off and send unit to the factory for inspection. Mount the unit on a DIN-rail so that the output terminals are located on the top and input terminals are located on the bottom of the unit. For other mounting orientations see de-rating requirements in this document. See chapter 23.13. This device is designed for convection cooling and does not require an external fan. Do not obstruct airflow and do not cover ventilation grid (e.g. cable conduits) by more than 30%! Keep the following installation clearances: 40mm on top, 20mm on the bottom, 5mm on the left and right sides are recommended when the device is loaded permanently with more than 50% of the rated power. Increase this clearance 15mm in case the adjacent device is a heat source (e.g. another power supply).

WARNING Risk of electrical shock, fire, personal injury or death.

- Do not use the power supply without proper grounding (Protective Earth). Use the terminal on the input block for earth connection and not one of the screws on the housing. - Turn power off before working on the device. Protect against inadvertent re-powering. - Make sure that the wiring is correct by following all local and national codes. - Do not modify or repair the unit. - Do not open the unit as high voltages are present inside. - Use caution to prevent any foreign objects from entering the housing. - Do not use in wet locations or in areas where moisture or condensation can be expected. - Do not touch during power-on, and immediately after power-off. Hot surfaces may cause burns.

Nov. 2011 / Rev. 2.1 DS-QS3.241-EN All parameters are specified 230Vac, 25C ambient and after a 5 minutes run-in time unless otherwise noted. www.pulspower.com Phone Germany


 

Some Part number from the same manufacture PULS, LP
QS20.241
QS20.481
QS10.481
QS10.241
QS10.121
QS5.241
QT20.241
QS40.241
QS40.481
QT40.241
CS3.241
CS5.241
CS10.241
CP10.121
CP10.241
CP10.481
CT10.241
CPS20.121
CPS20.241
CPS20.481
PIC120.241D
Same catergory

74F109 : Bipolar->F Family. Dual JK# Positive Edge-triggered Flip-flop. The F109 consists of two high-speed, completely independent transition clocked JK flip-flops. The clocking operation is independent of rise and fall times of the clock waveform. The JK design allows operation as a D-type flip-flop (refer to F74 data sheet) by connecting the J and K inputs. Asynchronous Inputs: LOW input to SD sets Q to HIGH level LOW input.

LC651431N : System Components. Four-Bit CMOS Microcontrollers for Small-Scale Control Applications The LC651431N/F/L and LC651432N/F/L are the smallscale control models in Sanyo's LC6500 Series of 4-bit microcontrollers and feature the same basic architecture and instruction set. These microcontrollers are appropriate for a wide range of applications, from applications that require.

SSI-LXH387SID-150 : T-4.9mm Freznel Lens Indicator, 6" Leads.

CGH351T500V2-C : Inverter Grade Screw Terminal Aluminum Electrolytic 85 C, Screw Terminal Capacitors.

2-1546984-3 : Through Hole Terminal Block - Barrier Block Connectors, Interconnect Through Hole; BARRIER STRIP 23POS VERT .438". s: Color: Black ; Mounting Type: Through Hole ; Number of Positions: 23 ; Number of Rows: 1 ; Pitch: 0.438" (11.12mm) ; Terminal Block Type: Barrier Block ; Number of Circuits: 23 ; : - ; Current: 20A ; Voltage: 600V ; Wire Gauge: 12 AWG ; Top Termination:.

599-11-11-612 : Crimping, Stripping, Cutting Tools & Drills TOOL TO OPEN MODICE LE ENCLOSURE. s: Manufacturer: Cinch ; Product Category: Crimping, Stripping, Cutting Tools & Drills ; RoHS:  Details ; Type: Opening Tool ; /Function: ModICE opening tool ; For Use With: ModICE LE.

LKX2G561MESC45 : 560F Aluminum Capacitor Radial, Can - Snap-In 400V; CAP ALUM 560UF 400V 20% SNAP. s: Capacitance: 560F ; ESR (Equivalent Series Resistance): - ; : Audio ; Lifetime @ Temp.: 2000 Hrs @ 105C ; Size / Dimension: 1.378" Dia (35.00mm) ; Lead Spacing: 0.394" (10.00mm) ; Surface Mount Land Size: - ; Mounting Type: Through Hole ; Package / Case: Radial,.

867823-1 : Micro-Miniature LGH, Plug, 1 pos to Cable (Round) Lgh Cable Assembly 15.0" (381.0mm); CONN PLUG 1POS 22AWG WHITE. s: Connector Type: Micro-Miniature LGH, Plug, 1 pos to Cable (Round) ; Voltage: 7.5kV ; Length: 15.0" (381.0mm) ; Wire Gauge: 22 AWG ; Shielding: Unshielded ; Barrel Depth: 0.68" (17.27mm) ; Color - Cap: No Cap ; Color - Wire: White ; Material.

4660-6005 : Gold Panel Mount Rectangular - Free Hanging, Panel Mount Connectors, Interconnect Plug; CONN PLUG 60POS W/FLANGE&INSE. s: Color: Gray ; Connector Type: Plug ; Contact Finish: Gold ; : Feed Through ; Mounting Type: Panel Mount ; Number of Rows: 2 ; Pitch: 0.100" (2.54mm) ; Row Spacing: 0.100" (2.54mm) ; Packaging: Bulk ; Fastening Type: - ; Contact Finish.

74AVCH8T245PW:118 : Logic - Translator Integrated Circuit (ics) Voltage Tape & Reel (TR) Voltage; IC TRANSCVR 3ST 8BIT 24TSSOP. s: Package / Case: 24-TSSOP (0.173", 4.40mm Width) ; Packaging: Tape & Reel (TR) ; Input Type: Voltage ; Output Type: Voltage ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

ERA-14EB102U : 1K Ohm 0.25W, 1/4W Chip Resistor - Surface Mount; RES 1.0K OHM 1/4W .1% 1210. s: Resistance (Ohms): 1K ; Power (Watts): 0.25W, 1/4W ; Tolerance: 0.1% ; Packaging: Digi-Reel ; Composition: Thin Film ; Temperature Coefficient: 25ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

CRCW20101R60JNEF : 1.6 Ohm 0.75W, 3/4W Chip Resistor - Surface Mount; RES 1.6 OHM 3/4W 5% 2010 SMD. s: Resistance (Ohms): 1.6 ; Power (Watts): 0.75W, 3/4W ; Tolerance: 5% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 200ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

CC2000CPGRB36X250/0.8 : ELECTRIC FUSE, 0.8A, 2000VDC, 30000A (IR), INLINE/HOLDER. s: Mounting: Replaceable ; Rated Voltage: 2000 volts ; Rated Current: 0.8000 amps ; Rated Breaking Capacity: 30000 amps.

QSW025A0B1-HZ : 1-OUTPUT 300 W DC-DC REG PWR SUPPLY MODULE. s: Package Type: Other, ROHS COMPLIANT, QUARTER BRICK PACKAGE-7 ; Output Voltage: 11.4 to 12.6 volts ; Input Voltage: 36 to 75 volts ; Output Power: 300 watts (0.4021 HP) ; Operating Temperature: -40 to 85 C (-40 to 185 F).

2500FB39A0050E : Signal Conditioning BALUN/FILTER 2.5GHz 1:1. s: Manufacturer: Johanson ; Product: Balanced Filters ; Frequency: 2.5 GHz ; Frequency Range: 2300 MHz to 2700 MHz ; Impedance: 50 Ohms ; Termination Style: SMD/SMT ; Package / Case: 1008 (2520 metric) ; Operating Temperature Range: - 40 C to + 85 C ; Packaging: Reel ; Insertion Loss: 3 dB ; Type: Balun Filter.

12FMN-BMT-TF : 12 CONTACT(S), FEMALE, STRAIGHT FFC/FPC CONNECTOR, SURFACE MOUNT. s: Connector Type: FPC/FFC ; Gender: Female ; Termination Types: PCBSolder ; Number of Contacts: 12.

2962718 : 0.8 mm2, BRASS, PUSH-ON TERMINAL. s: Terminal Type: Push On Terminal ; Material: BRASS ; International: 0.8000 mm2.

PENB1020A4800F01 : Power over Ethernet - PoE Gigabit PoE Adapter 19.2W, 48Vdc, C14. s: Input Voltage: 100 VAC to 240 VAC ; Number of Outputs: 1 Output ; Output Voltage-Channel 1: 48 V ; Output Current-Channel 1: 400 mA ; AC Plug included/required: Required ; Load Regulation: Regulated ; Output Power: 19.2 W.

 
0-C     D-L     M-R     S-Z