Details, datasheet, quote on part number: AC03000001000JACCS
PartAC03000001000JACCS
CategoryPassive Components => Resistors => Wirewound Resistors => 8831821
TitleWirewound Resistors - Through Hole 3watts 100ohms 5% Fusible/Safety Res.
Description

Vishay AC0x..CS Series Axial Cemented Fusible Wirewound Safety Resistors use specially selected resistive winding wire and special non-flammable silicon cement coating material to ensure safe and silent fusing operation in overload conditions. The resistor fuses "without a bang" when AC mains voltage is applied and simultaneously acts as an inrush current limiting resistor for the normal operation. The AC0x..CS series resistors from Vishay are UL1412 recognized fusible wirewound resistors with Sn coated Cu termination wires.

CompanyVishay/Draloric
DatasheetDownload AC03000001000JACCS datasheet
Specifications 
SeriesAC03..CS
Resistance100 Ohms
Power Rating3 W
Tolerance5 %
Temperature Coefficient
Diameter5.5 mm
Length13 mm
Termination StyleAxial
PackagingAmmo Pack
AC03000001000JACCS photo

Others parts numbering
AC050000B2209J6BCS: Wirewound Resistors - Through Hole 5watt 22ohm 5% Fusible/Safety Res.
AC050000A1009J6BCS: Wirewound Resistors - Through Hole 5watt 10ohm 5% Fusible/Safety Res.
AC050000B6809J6BCS: Wirewound Resistors - Through Hole 5watt 68ohm 5% Fusible/Safety Res.
AC050000B7509J6BCS: Wirewound Resistors - Through Hole 5watt 75ohm 5% Fusible/Safety Res.
AC03000006809JACCS: Wirewound Resistors - Through Hole 3watts 68ohms 5% Fusible/Safety Res.
AC03000007509JACCS: Wirewound Resistors - Through Hole 3watts 75ohms 5% Fusible/Safety Res.
AC03000008209JACCS: Wirewound Resistors - Through Hole 3watts 82ohms 5% Fusible/Safety Res.
AC03000002209JACCS: Wirewound Resistors - Through Hole 3watts 22ohms 5% Fusible/Safety Res.
AC03000004709JACCS: Wirewound Resistors - Through Hole 3watts 47ohms 5% Fusible/Safety Res.
AC050000B3309J6BCS: Wirewound Resistors - Through Hole 5watt 33ohm 5% Fusible/Safety Res.
AC050000B5009J6BCS: Wirewound Resistors - Through Hole 5watt 50ohm 5% Fusible/Safety Res.
AC050000B3909J6BCS: Wirewound Resistors - Through Hole 5watt 39ohm 5% Fusible/Safety Res.
AC03000003909JACCS: Wirewound Resistors - Through Hole 3watts 39ohms 5% Fusible/Safety Res.
AC03000001009JACCS: Wirewound Resistors - Through Hole 3watts 10ohms 5% Fusible/Safety Res.
AC03000004708JACCS: Wirewound Resistors - Through Hole 3watts 4.7ohm 5% Fusible/Safety Res.
AC050000B1000J6BCS: Wirewound Resistors - Through Hole 5watt 100ohm 5% Fusible/Safety Res.
AC050000B4709J6BCS: Wirewound Resistors - Through Hole 5watt 47ohms 5% 6kV Fusible/Safety Res.
AC01000001009JACCS: Wirewound Resistors - Through Hole 1watt 10ohm 5% Fusible/Safety Res.
AC01000003309JACCS: Wirewound Resistors - Through Hole 1watt 33ohm 5% Fusible/Safety Res.
AC03000003309JACCS: Wirewound Resistors - Through Hole 3watts 33ohm 5% Fusible/Safety Res.
AC01000002209JACCS: Wirewound Resistors - Through Hole 1watt 22ohm 5% Fusible/Safety Res.
AC01000001000JACCS: Wirewound Resistors - Through Hole 1watt 100ohm 5% Fusible/Safety Res.
AC01000003908JACCS: Wirewound Resistors - Through Hole 1watt 3.9ohm 5% Fusible/Safety Res.
AC01000003909JACCS: Wirewound Resistors - Through Hole 1watt 39ohm 5% Fusible/Safety Res.

 

Features, Applications

Axial Cemented Fusible Wirewound Safety Resistors
FEATURES

UL1412 recognized; UL file no. E362452 (AC03-CS and AC05-CS only) Surge voltage handling capability (up to 6 kV) 50 s pulse in IEC 61000-4-5) Silent and safe fusing Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

APPLICATIONS

Energy meters ACxx-CS wirewound safety resistor series is designed to be used as fusible safety resistor (or, AC mains input resistors). The resistor fuses "without a bang" when AC mains voltage is applied. At the same time, it acts as an in-rush current limiting resistor for the normal operation. The specially developed lacquer coating has superior thermal and electrical insulating properties. This allows designers to more easily meet the requirements of safety approval, whilst eliminating the need to put additional fuses in series with the input resistor. LED drivers White goods Power supplies

DESCRIPTION Resistance range (1) Resistance tolerance Temperature coefficient Rated dissipation, P40 Rated dissipation, P70 Operating voltage, Umax. AC/DC Operating temperature range Max. resistance change for P70, R max., after 1000 h: Note Resistance value to be selected for 5 % from E24 series. 4.7 to ppm/K to 100

Document Number: 28909 1 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Product Description: AC G63 CDxxxx AC03-CS TYPE AC05-CS 22R RESISTANCE 5% TOLERANCE 5% AC PACKAGING 6F G63 TAPE WIDTH G83 G93 CDxxxx SPECIAL

TYPE AC01-CS AC03-CS CODE QUANTITY mm 500 Taped acc. to IEC 60286-1 fan-folded in a box 85 mm PACKAGING STYLE WIDTH 63 mm PITCH 5 mm DIMENSIONS 70 mm

Document Number: 28909 2 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ACxx-CS wirewound safety resistor series is designed to be used as fusible safety resistor (or, AC mains input resistors). It uses specially selected resistive winding wire and special inflammable silicon cement coating material to ensure safe and silent fusing operation in overload conditions. The resistor fuses "without a bang" when AC mains voltage is applied. At the same time, it acts as an in-rush current limiting resistor for the normal operation. The specially developed lacquer coating has superior thermal and electrical insulating properties. This allows designers to more easily meet the requirements of safety approval, whilst eliminating the need to put additional fuses in series with the input resistor. Production is strictly controlled and follows an extensive set of instructions established for reproducibility. Plated steel termination caps are firmly pressed on the ceramic rods. Connecting wires of electrolytic copper plated with 100 % pure tin are welded to the termination caps. Suitable resistive wire is selected as a winding material. An optimized number of windings are wound on a high grade ceramic body. The resistor elements are covered by a green protective coating designed for electrical, mechanical and climatic protection. The special coating provides ideal and silent fusing of the component in overload condition, without burning or explosion. The ohmic value, tolerance, rated dissipation is stamp marked. Also "S" is marked for safety version and "4S" and "6S" is marked for 4 kV and 6 kV version respectively. The result of the determined production is verified by an extensive testing procedure performed % of the individual resistors. Only accepted products are stuck directly on the adhesive tapes in accordance with IEC 60286-1.

The products do not contain any of the banned substances as per IEC 62474, GADSL, or the SVHC list, see www.vishay.com/how/leadfree. Hence the products fully comply with the following directives: 2000/53/EC End-of-Life Vehicle Directive (ELV) and Annex II (ELV II) 2011/65/EU Restriction of the Use of Hazardous Substances Directive (RoHS) with amendment 2015/863/EU 2012/19/EU Waste Electrical and Electronic Equipment Directive (WEEE) Vishay pursues the elimination of conflict minerals from its supply chain, see the Conflict Minerals Policy at www.vishay.com/doc?49037.

The resistors are suitable for processing on automatic insertion equipment and cutting and bending machines. Excellent solderability is proven, even after extended storage. They are suitable for automatic soldering using wave or dipping. The resistors are completely lead (Pb)-free, the pure tin plating provides compatibility with lead (Pb)-free and lead-containing soldering processes. The immunity of the plating against tin whisker growth, in compliance with IEC 60068-2-82, has been proven under extensive testing. The encapsulant is resistant to cleaning solvent specified in IEC 60115-1 (4). The suitability of conformal coatings, if applied, shall be qualified by appropriate means to ensure the long-term stability of the whole system.

Vishay acknowledges the following systems for the regulation of hazardous substances: IEC 62474, Material Declaration for Products of and for the Electrotechnical Industry, with the list of declarable substances given therein (1) The Global Automotive Declarable Substance List (GADSL) (2) The REACH regulation (1907/2006/EC) and the related list of substances with very high concern (SVHC) (3) for its supply chain For a correlated range of wirewound resistors with high pulse handling capability, please see: Z300-Cxx series "High Surge Axial Cemented Wirewound Resistors" www.vishay.com/doc?21027 For a correlated range of standard wirewound resistors, please see: Z300 series "Industrial Axial Cemented Wirewound Resistors" www.vishay.com/doc?21007 and Z300-C00 series "Commercial Axial Cemented Wirewound Resistors" www.vishay.com/doc?21047

Notes (1) The IEC 62474 list of declarable substances is maintained in a dedicated database, which is available http://std.iec.ch/iec62474. (2) The Global Automotive Declarable Substance List (GADSL) is maintained by the American Chemistry Council and available at www.gadsl.org. (3) The SVHC list is maintained by the European Chemical Agency (ECHA) and available at http://echa.europa.eu/candidate-list-table. (4) Other cleaning solvents with aggressive chemicals should be evaluated in actual cleaning process for their suitability. Revision: 12-Jul-16 Document Number: 28909 3 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


 

Some Part number from the same manufacture Vishay/Draloric
AC050000B2209J6BCS

Vishay AC0x..CS Series Axial Cemented Fusible Wirewound Safety Resistors use specially selected resistive winding wire and special non-flammable silicon cement coating material to ensure safe and silent

AC050000A1009J6BCS
AC050000B6809J6BCS
AC050000B7509J6BCS
AC03000006809JACCS
AC03000007509JACCS
AC03000008209JACCS
AC03000002209JACCS
AC03000004709JACCS
AC050000B3309J6BCS
AC050000B5009J6BCS
AC050000B3909J6BCS
AC03000003909JACCS
AC03000001009JACCS
AC03000004708JACCS
AC050000B1000J6BCS
AC050000B4709J6BCS
AC01000001009JACCS
AC01000003309JACCS
AC03000003309JACCS
AC01000002209JACCS
Same catergory

1025R-14K : RF Inductors 0.56 uH. s: Manufacturer: API Delevan ; Product Category: RF Inductors ; RoHS:  Details ; Inductance: 560 nH ; Tolerance: 10 % ; Maximum DC Current: 550 mAmps ; Maximum DC Resistance: 0.5 Ohms ; Self Resonant Frequency: 300 MHz ; Q Minimum: 30 ; Termination Style: Axial ; Dimensions: 0.25 in L ; Packaging: Bulk ; Shielding: Unshielded.

S1812R-101K : RF Inductors .10uH 10%. s: Manufacturer: API Delevan ; Product Category: RF Inductors ; RoHS:  Details ; Inductance: 100 nH ; Tolerance: 10 % ; Maximum DC Current: 0.09 Amp ; Maximum DC Resistance: 0.09 Ohms ; Self Resonant Frequency: 460 MHz ; Q Minimum: 25 ; Operating Temperature Range: - 55 C to + 125 C ; Termination Style: SMD/SMT ; Package.

06035C273J4Z4A : Multilayer Ceramic Capacitors (MLCC) - SMD/SMT 50volts .027uF 5%. s: Manufacturer: AVX ; Product Category: Multilayer Ceramic Capacitors (MLCC) - SMD/SMT ; RoHS:  Details ; Capacitance: 0.027 uF ; Tolerance: 5 % ; Voltage Rating: 50 Volts ; Operating Temperature Range: - 55 C to + 125 C ; Temperature Coefficient / Code: X7R ; Package / Case: 0603.

TAJD226K020PNJ : Tantalum Capacitors - Solid SMD 20V 22uF 10%. The AVX TAJ Series Standard Tantalum Capacitors are general purpose, SMT chip capacitors . Available in case sizes 1206, 1210, 2312, 2917, and 2924, the TAJ series a CV range of 0.10-2200µF / 2.5-50V. Lead(Pb)-free and RoHS compliant. See Low Profile options for . s: Manufacturer: AVX ; Product Category:.

3352E-1-504LF : Trimmer Resistors - Through Hole 3/8"round 500Kohms 0.5watt 20%. s: Manufacturer: Bourns ; Product Category: Trimmer Resistors - Through Hole ; RoHS:  Details ; Product Type: Single Turn ; Resistance: 500 KOhms ; Power Rating: 500 mWatts (1/2 Watt) ; Voltage Rating: 250 Volts ; Operating Temperature Range: - 55 C to + 125 C ; Tolerance: 20 % ; Adjustment:.

RL622-1R5K-RC : RF Inductors 1.5uH 10% 7.96MHz 8.5mA. s: Manufacturer: Bourns ; RoHS:  Details ; Inductance: 1.5 uH ; Tolerance: 10 % ; Maximum DC Current: 8.5 A ; Maximum DC Resistance: 0.016 Ohms ; Self Resonant Frequency: 130 MHz ; Q Minimum: 20 ; Operating Temperature Range: - 55 C to + 105 C ; Termination Style: Radial ; Core Material: Ferrite ; Lead Spacing:.

CAY10-102J4LF : Resistor Networks & Arrays 1K 5% Convex 4resistors. s: Manufacturer: Bourns ; Product Category: Resistor Networks & Arrays ; RoHS:  Details ; Product Type: Arrays ; Circuit Type: Isolated ; Number of Resistors: 4 ; Resistor Values: 1 KOhms ; Tolerance: 5 % ; Temperature Coefficient: 250 PPM / C ; Package / Case: 0804 ; Operating Temperature Range:.

6EHQ1 : RFI POWER LINE FILTER, 6A, 5UA. s: Filter Type: EMI / RFI ; Current Rating: 6A ; Voltage Rating: 250VAC ; Leakage Current Max: 5A ; Capacitance: 1.97F ; Inductance Min: 48.8mH ; Termination Type: -.

ECS-65-12-1X : Crystals 6.5536MHz 12pF. s: Manufacturer: ECS ; Product Category: Crystals ; RoHS:  Details ; Frequency: 6.5536 MHz ; Tolerance: 30 PPM ; Frequency Stability: 50 PPM ; Load Capacitance: 12 pF ; Termination Style: Radial ; Package / Case: HC-49 ; Operating Temperature Range: - 10 C to + 70 C ; Dimensions: 4.65 mm W x 11.35 mm L x 13.46 mm H ; Mounting.

ECS-25-S-1X : Crystals 2.5MHz SERIES. s: Manufacturer: ECS ; Product Category: Crystals ; RoHS:  Details ; Frequency: 2.5 MHz ; Tolerance: 30 PPM ; Frequency Stability: 50 PPM ; Load Capacitance: Series ; Termination Style: Radial ; Package / Case: HC-49 ; Operating Temperature Range: - 10 C to + 70 C ; Dimensions: 4.65 mm W x 11.35 mm L x 13.46 mm H ; ESR:.

CSTCE20M0V51-R0 : Resonators 20.0MHz CERALOCK. Murata's CSTCE 8-30MHz Chip CERALOCK® Resonators are SMD resonators used for general consumer applications, high speed USB, and automotive functions. Murata's chip type CERALOCK line offers a built-in load capacitor, thereby eliminating the need for an external load capacitor. The space savings realized, along with.

GRM43NR72A104KA01K : Multilayer Ceramic Capacitors (MLCC) - SMD/SMT .1uF 100Volts 10%. The Murata GRM/GCM Series General Purpose Ceramic Capacitors are lowvoltage, high dielectric constant type, in a smaller size with a highercapacitance value. Available from C0G to Z5U temperature coefficients,the GRM Series General Purpose Ceramic Capacitors are highly reliable, offer.

UPZW6121MHD : Aluminum Electrolytic Capacitors - Leaded 420volts 120uF 18X35.5 20%. s: Manufacturer: Nichicon ; Product Category: Aluminum Electrolytic Capacitors - Leaded ; RoHS:  Details ; Capacitance: 120 uF ; Tolerance: 20 % ; Voltage Rating: 420 Volts ; Operating Temperature Range: - 25 C to + 105 C ; Termination Style: Radial ; Dimensions: 18 mm Dia. x 35.5.

RLF12560T-100M7R5 : Power Inductors 10uH 7.5AMPS. s: Manufacturer: TDK ; Product Category: Power Inductors ; RoHS:  Details ; Inductance: 10 uH ; Tolerance: 20 % ; Maximum DC Current: 7.8 Amps ; Maximum DC Resistance: 12.4 mOhms ; Operating Temperature Range: - 20 C to + 105 C ; Dimensions: 12.8 mm W x 12.5 mm L x 6 mm H ; Termination Style: SMD/SMT ; Packaging: Reel.

TVA1303-E3 : Aluminum Electrolytic Capacitors - Leaded 5.0uF 50volts. s: Manufacturer: Vishay ; Product Category: Aluminum Electrolytic Capacitors - Leaded ; RoHS:  Details ; Capacitance: 5 uF ; Voltage Rating: 50 Volts ; Operating Temperature Range: - 40 C to + 85 C ; Termination Style: Axial ; Dimensions: 6.35 mm Dia. x 12.7 mm L ; Product: Low Leakage Electrolytic.

302-19.6K-RC : Thick Film Resistors - SMD 1/10WATT 19.6KOHMS. s: Manufacturer: Xicon ; Product Category: Thick Film Resistors - SMD ; RoHS:  Details ; Resistance: 19.6 KOhms ; Tolerance: 1 % ; Power Rating: 100 mWatts ; Temperature Coefficient: 200 PPM / C ; Series: 302 ; Termination Style: SMD/SMT ; Package / Case: 0603 (1608 metric) ; Voltage Rating: 50 Volts.

261-30-RC : Metal Oxide Resistors 30ohms 5% Tol. s: Manufacturer: Xicon ; Product Category: Metal Oxide Resistors ; RoHS:  Details ; Resistance: 30 Ohms ; Tolerance: 5 % ; Power Rating: 1 Watt ; Voltage Rating: 350 Volts ; Temperature Coefficient: 350 PPM / C ; Termination Style: Axial ; Operating Temperature Range: - 55 C to + 235 C ; Dimensions: 5 mm Dia.

IHCL4040DZER2R2M5A : Coupled Inductors 2.2uH 20%. Vishay / Dale IHCL4040DZ Series Inductors are viable at high temperature(up to 155 C), and feature a shielded construction, frequency range up to 5.0 MHz, and the lowest DCR/H in this package size.  The IHCL4040DZ Series handles high transient current spikes without saturation. It has ultra low buzz noise, due to composite.

750342557 : Transformers Audio & Signal MID-IMAXIB Pwr Indtr For Maxim 17681. Wurth Electronics Midcom MID-IMAXIB Industrial Maxim Iso-Buck Transformers for DC/DC Isolated Power Supplies are designed for use in Maxim Integrated MAX17681 Evaluation Kits. MID-IMAXIB series transformers come in a small, self-shielding, package that is pick & placeable. These transformers.

2450BM14G0011T : Signal Conditioning 2400-2500MHz 1.8dB TI CC2650 and CC2640. s: Product Category: Signal Conditioning ; Manufacturer: Johanson ; Product: Baluns ; Frequency: 2400 MHz to 2500 MHz ; Frequency Range: 2400 MHz to 2500 MHz ; Termination Style: SMD/SMT ; Package/Case: 0603 (1608 metric) ; Operating Temperature Range: - 40 C to + 85 C ; Packaging: Reel ; Brand:.

 
0-C     D-L     M-R     S-Z