Details, datasheet, quote on part number: PJA150F-12
PartPJA150F-12
CategoryPower => Power Supplies => 8832060
TitleSwitching Power Supplies 150W 12V 12.5A
Description

Cosel PJA Series is an Enclosed AC-DC Power Supply available with 100W, 150W, and 600W output ratings. The series features an input rating of AC85 - 264V and a wide operating temperature range of -20 to +70. The devices have a low profile design: 1U size for PJA100F and PJA150F models; 2U size for PJA600F models. A variety of connection interface options is available.

CompanyCosel
DatasheetDownload PJA150F-12 datasheet
Specifications 
ProductSwitching Supplies
Output Voltage-Channel 112 V
Number of Outputs1 Output
Output Power150 W
Open Frame/EnclosedEnclosed
Input Voltage85 VAC to 264 VAC
Output Current-Channel 112.5 A
Commercial/MedicalCommercial
Isolation Voltage3 kVAC
Mounting StyleChassis
Length129 mm
Width41 mm
Height97 mm
SeriesPJA
Efficiency84 %
PJA150F-12 photo

Others parts numbering
PJA600F-24: Switching Power Supplies 600W 24V 25A
PJA150F-24: Switching Power Supplies 153.6W 24V 6.4A
PJA100F-12: Switching Power Supplies 100.8W 12V 8.4A
PJA150F-48: Switching Power Supplies 153.6W 48V 3.2A
PJA600F-12: Switching Power Supplies 600W 12V 50A
PJA100F-48: Switching Power Supplies 100.8W 48V 2.1A
PJA150F-36: Switching Power Supplies 151.2W 36V 4.2A
PJA100F-24: Switching Power Supplies 103.2W 24V 4.3A
PJA600F-36: Switching Power Supplies 601.2W 36V 16.7A
PJA100F-36: Switching Power Supplies 100.8W 36V 2.8A
PJA600F-48: Switching Power Supplies 600W 48V 12.5A
PJA600F-15: Switching Power Supplies 600W 15V 40A
PJA100F-15: Switching Power Supplies 100.5W 15V 6.7A
PJA150F-15: Switching Power Supplies 150W 15V 10A
PJA600F-5: Switching Power Supplies 500W 5V 100A

 

Features, Applications

High voltage pulse noise type : NAP series Low leakage current type : NAM series

* A higher current rating EMI/EMC filter may be recommended in view of the other devices that could be connected in parallel with the power supply.

1 Series name 2 Single output 3 Output wattage 4 Universal input 5 Output voltage 6 Optional C : with Coating R : Remote on/off (Required external power source) J : Connector interface T : Vertical terminal block N2 : with DIN rail

*Make sure necessary tests will be carried out on your end equipment with the power supply installed in accordance with any required EMC/EMI regulations.

SPECIFICATIONS

MODEL VOLTAGE[V] CURRENT[A] FREQUENCY[Hz] ACIN 100V ACIN 115V ACIN 230V INPUT ACIN 100V POWER FACTOR ACIN 115V ACIN 230V ACIN 100V INRUSH CURRENT[A] ACIN 115V ACIN 230V LEAKAGE CURRENT[mA] VOLTAGE[V] ACIN 85-115V CURRENT[A] ACIN 115V-264V ACIN 85-115V WATTAGE[W] ACIN 115V-264V *4 LINE REGULATION[mV] LOAD REGULATION to 30% [mV] to +40C RIPPLE[mVp-p] to 0C Io: load factor to 30% OUTPUT to +40C RIPPLE NOISE[mVp-p] to 0C Io: load factor to +40C TEMPERATURE REGULATION[mV] +40C *2 DRIFT[mV] START-UP TIME[ms] HOLD-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OUTPUT VOLTAGE SETTING[V] OVERCURRENT PROTECTION OVERVOLTAGE PROTECTION[V] CIRCUIT AND OPERATING INDICATION OTHERS REMOTE SENSING REMOTE ON/OFF *9 INPUT-OUTPUT RC INPUT-FG ISOLATION *9 OUTPUT RC-FG *9 OUTPUT-RC OPERATING TEMP.,HUMID.AND ALTITUDE*5 STORAGE TEMP.,HUMID.AND ALTITUDE ENVIRONMENT VIBRATION IMPACT AGENCY APPROVALS SAFETY AND NOISE CONDUCTED NOISE REGULATIONS HARMONIC ATTENUATOR *8 EFFICIENCY[%] ACIN 100V ACIN 115V ACIN 230V

* Please consider "PBA100F-5-N" about 5V output with case cover.

264 1f (Output derating is required - 115V. See 1.1 and 3.2 in Instruction Manual) (Io=100%) * Power factor correction is stopped AC250V or more. Ta=25C at cold start Ta=25C at cold start Ta=25C at cold start 0.75max (ACIN 60Hz, Io=100%, According to IEC60950-1 and DEN-AN) Output derating is required at ACIN 115V or less (refer to instruction manual Output derating is required at ACIN 115V or less (refer to instruction manual 150max 300max Burst operation (Please contact us about detail) 192max 500typ (ACIN Ta=25C 20typ (ACIN to 49.92 Works over 105% of rating and recovers automatically to 67.20 LED (Green) Not provided Optional (Required external power source. Option -R) AC3,000V 1minute, Cutoff current DC500V 50MW min (At room temperature) AC2,000V 1minute, Cutoff current DC500V 50MW min (At room temperature) AC500V 1minute, Cutoff current DC500V 50MW min (At room temperature) AC500V 1minute, Cutoff current DC500V 50MW min (At room temperature) to +70C (Output derating is required), - 90%RH (Non condensing), 3,000m (10,000 feet) max - 90%RH (Non condensing), 9,000m (30,000 feet) max (2G), 3minutes period, 60minutes each along X, Y and Z axes (20G), 11ms, once each X, Y and Z axes UL60950-1, C-UL EN60950-1, UL508 (Except option -J) Complies with DEN-AN Complies with FCC-B, VCCI-B, EN55011-B, EN55022-B Complies with IEC61000-3-2 class A

CASE SIZE/WEIGHT COOLING METHOD WARRANTY OTHERS

41X97X109mm [1.61X3.82X4.29 inches] (Excluding terminal block and screw) (WXHXD) / 500g max Convection 5 years (subject to the operating conditions)

hour warm-up at 25C. Output power derating is required. As for DC input, consult us for advice. *3 *4 Consult us about dynamic load and input response. Measure the output voltage by using the average mode of the tester to deal with the burst operation at 30% load or less. *5 Output power derating is required. See 3.2 in Instruction Manual. *6 See 3.3 in Instruction Manual for more details. Consult us about safety agency approvals for the models with optional functions. *7 *8 Consult us about other classes. *9 The RC terminal is added to option R models. The RC terminal is isolated from input, output, and FG. Do not use the power supply in overcurrent conditions or in unspecified * input voltage ranges. Otherwise the internal components may be damaged. * Parallel operation is not possible with this mode. * Sound noise may be heard from the power supply when used for pulse load.

*1 This is the result of measurement of the testing board with capacitors of 22mF and 0.1mF placed 150 mm from the output terminals a 20 MHz oscilloscope or a ripple-noise meter equivalent to Keisoku-Giken RM103. See 1.6 of Instruction Manual for more details. When the load factor - 30%, the switching power loss is reduced by burst operation, which will cause ripple and ripple noise to go beyond the specifications. *2 Drift is the change in DC output for an eight hour period after a half-

Features

- Compact design (Depth: 4.29inches) - High efficiency AC230Vin, 100% load) - Low power consumption (1.5W typ AC240Vin, no load at standard model) - UL508 approved (Except option -J), and complies with SEMI F47 (see instruction manual 1.1) - Various connection interface options (vertical terminal [-T], AMP connector [-J])

The external size of R option, J option, N2 option and T option models is different from the standard model. See "5. Options and Others" in Instruction Manual for more details.

Output terminal(+) Output voltage adjustable potentiometer LED

Tolerance Weight : 500g max PCB Material/thickness [0.06inches] Chassis material : Aluminum Cover material : Electric galvanizing steel board Dimensions in mm, [ ]=inches Mounting torque : 0.49N-m max Screw tightening torque M3.5 1.0N-m max Connect the input FG to safety earth ground.


1 Series name 2 Single output 3 Output wattage 4 Universal input 5 Output voltage 6 Optional C : with Coating R : Remote on/off (Required external power source) J : Connector interface T : Vertical terminal block N2 : with DIN rail

MODEL VOLTAGE[V] CURRENT[A] FREQUENCY[Hz] ACIN 100V ACIN 115V ACIN 230V INPUT ACIN 100V POWER FACTOR ACIN 115V ACIN 230V ACIN 100V INRUSH CURRENT[A] ACIN 115V ACIN 230V LEAKAGE CURRENT[mA] VOLTAGE[V] ACIN 85-115V CURRENT[A] ACIN 115V-264V ACIN 85-115V WATTAGE[W] ACIN 115V-264V *4 LINE REGULATION[mV] LOAD REGULATION to 30% [mV] to +40C RIPPLE[mVp-p] to 0C Io: load factor to 30% OUTPUT to +40C RIPPLE NOISE[mVp-p] to 0C Io: load factor to +40C TEMPERATURE REGULATION[mV] +40C *2 DRIFT[mV] START-UP TIME[ms] HOLD-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OUTPUT VOLTAGE SETTING[V] OVERCURRENT PROTECTION OVERVOLTAGE PROTECTION[V] CIRCUIT AND OPERATING INDICATION OTHERS REMOTE SENSING REMOTE ON/OFF *9 INPUT-OUTPUT RC INPUT-FG ISOLATION *9 OUTPUT RC-FG *9 OUTPUT-RC OPERATING TEMP.,HUMID.AND ALTITUDE*5 STORAGE TEMP.,HUMID.AND ALTITUDE ENVIRONMENT VIBRATION IMPACT AGENCY APPROVALS SAFETY AND NOISE CONDUCTED NOISE REGULATIONS HARMONIC ATTENUATOR *8 EFFICIENCY[%] ACIN 100V ACIN 115V ACIN 230V

* Please consider "PBA150F-5-N" about 5V output with case cover.

264 1f (Output derating is required - 115V. See 1.1 and 3.2 in Instruction Manual) (Io=100%) * Power factor correction is stopped AC250V or more. Ta=25C at cold start Ta=25C at cold start Ta=25C at cold start 0.75max (ACIN 60Hz, Io=100%, According to IEC60950-1 and DEN-AN) Output derating is required at ACIN 115V or less (refer to instruction manual Output derating is required at ACIN 115V or less (refer to instruction manual 150max 300max Burst operation (Please contact us about detail) 192max 500typ (ACIN Ta=25C 20typ (ACIN to 49.92 Works over 105% of rating and recovers automatically to 67.20 LED (Green) Not provided Optional (Required external power source. Option -R) AC3,000V 1minute, Cutoff current DC500V 50MW min (At room temperature) AC2,000V 1minute, Cutoff current DC500V 50MW min (At room temperature) AC500V 1minute, Cutoff current DC500V 50MW min (At room temperature) AC500V 1minute, Cutoff current DC500V 50MW min (At room temperature) to +70C (Output derating is required), - 90%RH (Non condensing), 3,000m (10,000 feet) max - 90%RH (Non condensing), 9,000m (30,000 feet) max (2G), 3minutes period, 60minutes each along X, Y and Z axes (20G), 11ms, once each X, Y and Z axes UL60950-1, C-UL EN60950-1, UL508 (Except option -J) Complies with DEN-AN Complies with FCC-B, VCCI-B, EN55011-B, EN55022-B Complies with IEC61000-3-2 class A


 

Some Part number from the same manufacture Cosel
PJA600F-24

Cosel PJA Series is an Enclosed AC-DC Power Supply available with 100W, 150W, and 600W output ratings. The series features an input rating of AC85 - 264V and a wide operating temperature range of -20 to +70.

PJA150F-24
PJA100F-12
PJA150F-48
PJA600F-12
PJA100F-48
PJA150F-36
PJA100F-24
PJA600F-36
PJA100F-36
PJA600F-48
PJA600F-15
PJA100F-15
PJA150F-15
PJA600F-5
Same catergory

EC4A17H : DC/DC Converters & Regulators 5-6W 18-36VDC 3.3VDC 1000mA 3K ISO. Cincon ´s high power density DC-DC Converter offers 2:1 and 4:1 inputs and single, dual, and triple outputs with efficiencies to 88% on an industry standard footprint. The converter is available in 2.5 VDC models. s: Manufacturer: Cincon ; Product Category: DC/DC Converters & Regulators.

EC4C15 : DC/DC Converters & Regulators 5-6W 18-36V +/-15V +/-190mA. s: Manufacturer: Cincon ; Product Category: DC/DC Converters & Regulators ; RoHS:  Details ; Product: Isolated ; Output Power: 3 W ; Input Voltage Range: 18 V to 36 V ; Input Voltage (nominal): 24 V ; Number of Outputs: 2 ; Output Voltage (Channel 1): 15 V ; Output Current (Channel 1): 190 mA ; Output.

EC4A06H : DC/DC Converters & Regulators 5-6W 9-18VDC +/-5VDC +/-500mA 3K ISO. Cincon ´s high power density DC-DC Converter offers 2:1 and 4:1 inputs and single, dual, and triple outputs with efficiencies to 88% on an industry standard footprint. The converter is available in 2.5 VDC models. s: Manufacturer: Cincon ; Product Category: DC/DC Converters & Regulators.

EC3SA-05D05 : DC/DC Converters & Regulators 3W 4.5-9.0V +/-5V +/-300mA SIP-8. The Cincon 3 Watt EC3SA Series DC/DC Converters feature single and dual output voltages of 3.3Vdc to ±15Vdc. With 1500Vdc isolation and regulated 3W isolated outputs, the Cincon EC3SA DC/DC Converters provide continuous short-circuit protection in a SIP-8 package with a remote On/Off control.

B84771A0015A000 : Power Line Filters IEC-Stecker Filter 15A 250V. s: Manufacturer: EPCOS ; Product Category: Power Line Filters ; RoHS:  Details ; Voltage Rating: 250 VoltsAC ; Current Rating: 15 A ; Mounting Style: Flange ; Termination Style: Quick Connect ; Product: Power Entry Filter Modules.

1064 : Battery Holders, Snaps & Contacts 20mm SM COIN CELL. Keystone is now offering a wide variety of battery holders and clips for a variety of uses. Keystone 's battery holder and clip offerings include surface mount battery clips /contacts, surface mount leaf-spring contacts, low profile surface mount coin cell holders , positive and negative surface mount.

PIM300AZ : DC/DC Converters & Regulators 1.6A in -38 to -75V out 5V 300W. s: Manufacturer: GE Energy (Lineage Power) ; Product Category: DC/DC Converters & Regulators ; RoHS:  Details ; Product: Isolated ; Output Power: 8 W ; Input Voltage Range: - 38 V to - 75 V ; Number of Outputs: 1 ; Output Voltage (Channel 1): 5 V ; Output Current (Channel 1): 1.6 A ; Isolation.

NPH15S2403EIC : DC/DC Converters & Regulators 24Vin 3.4Vout 4.4A Isolated 15W. s: Manufacturer: Murata Power Solutions ; Product Category: DC/DC Converters & Regulators ; RoHS:  Details ; Product: Isolated ; Output Power: 15 W ; Input Voltage Range: 18 V to 36 V ; Input Voltage (nominal): 24 V ; Number of Outputs: 1 ; Output Voltage (Channel 1): 3.4 V ; Output.

TWR-5/3000-12/500-D48A-C : DC/DC Converters & Regulators 20W +/-5/+/-12V. s: Manufacturer: Murata Power Solutions ; Product Category: DC/DC Converters & Regulators ; RoHS:  Details ; Product: Isolated ; Output Power: 15 W ; Input Voltage Range: 18 V to 75 V ; Input Voltage (nominal): 48 V ; Number of Outputs: 3 ; Output Voltage (Channel 1): 5 V ; Output Current (Channel.

RKZ-0505D : DC/DC Converters & Regulators 2W DC/DC 3kV UNREG 5Vin +/-5Vout. s: Manufacturer: RECOM Power ; RoHS:  Details ; Product: Isolated ; Output Power: 2 W ; Input Voltage Range: 4.5 V to 5.5 V ; Input Voltage (nominal): 5 V ; Number of Outputs: 2 ; Output Voltage (Channel 1): - 5 V ; Output Current (Channel 1): - 200 mA ; Output Voltage (Channel 2): 5 V ; Output.

MENT1220A1251F01 : Plug-In AC Adapters 180W 12V 15.0A Level V Efficiency. SL Power´s Ault MENT1220 Series 220W Medical Switch-Mode Power Supply a universal input 100Vac - 240Vac and a single output to 220W. One of the highest power outputs in standard external power supply, the desktop style power supply is housed in a non-vented case with no internal fan and ribbed.

MINT1065A2475C01 : Linear and Switching Power Supplies 65W 24V 2.7A. The Condor 65-Watt Power Supply - MINT1065 is the latest AC-DC power supply for universal and medical applications. With a compact 2"x4"x1.02" size, up to 90% high efficiency, EN/IEC,UL 60601-1 medical approval, and CSA 22.2 No. 601-1 safety approval, the Condor 65-Watt Power Supply MINT1065 is ideal.

MDS-065APS12 BA : Switching Power Supplies 12V 60W 2.0 X 4.0 X 1.2". Delta Electronics MDS Embedded Power Supply comes with universal AC input at 90VAC as well as low earth leakage, risk management report available, and the electric shock protection in compliance with 2 x MOPP. It is available in both an enclosed and open frame. The MDS series is certified for EMC standards.

TGMR-512V6LF : Pulse Transformers ISO MOD SMD GullWing For MAX13256 HBridge. s: Manufacturer: HALO Electronics ; Product Category: Pulse Transformers ; Turns Ratio: 4 1 CT ; Voltage Time - Et: 60 V us ; Primary Resistance: 1.2 Ohms ; Mounting Style: SMD/SMT ; Length: 10.87 mm ; Width: 9.45 mm ; Height: 10.03 mm ; Brand: HALO Electronics ; Isolation Voltage: 5 kV ; Operating.

GST220A20-R7B : Desktop AC Adapters 220W 20V 11A R7B plug Level VI. Mean Well GST160A, 220A and 280A Power Adapters' no load power consumption (lower than 0.15W~0.5W) and average working efficiency are superior to GS120/160/220(Level V). The GST160A/220A/280A adapters are thus able to better fulfill energy saving and carbon reduction, at either the no load mode or the operating.

SMI6-12-V-P6 : Wall Mount AC Adapters 6W 12V 0.5A 2.5 plug w/blade kit Level VI. s: Manufacturer: CUI Inc. ; Product Category: Wall Mount AC Adapters ; Region: Universal ; Mounting Style: Wall, Plug Adapter ; Input Voltage: 90 VAC to 264 VAC ; Number of Outputs: 1 Output ; Output Power: 6 W ; Output Voltage-Channel 1: 12 V ; Output Current-Channel 1: 500 mA ; Commercial/Medical:.

IQG48033A120V-109-R : Isolated DC/DC Converters 36-75V 12Vout33A96W NegPlrty 1/4brick TH. TDK-Lambda iQG Series Quarter Brick Converters are a 300-504W converter that 36-75VDC input and 9.6 or 12V output. The iQG series has through hole mounting and a low 13.2mm profile as well as 1500VDC basic isolation. The iQG Series Quarter Brick Converters are ideally suited for tight.

 
0-C     D-L     M-R     S-Z