Details, datasheet, quote on part number: ENS210-LQFM
PartENS210-LQFM
Category
TitleI2C, QFN4, DIGITAL PRE-CALIBRATE
Description
Companyams
DatasheetDownload ENS210-LQFM datasheet
  
ENS210-LQFM photo

Others parts numbering
ENS210-QF_EK_ST: ENS210 DEMO KIT
RFD77310: ENS210 SENSOR SHIELD
RFD77807: ENS210 TEMPERATURE AND HUMIDITY

 

Features, Applications
Relative Humidity and Temperature Sensor with IC Interface

The ENS210 integrates one relative humidity sensor and one high-accuracy temperature sensor. The device is encapsulated a QFN4 package and includes an IC slave interface for communication with a master processor. Ordering Information and Content Guide appear at end of datasheet.

The benefits and features of ENS210, Relative Humidity and Temperature Sensor with IC Interface are listed below: Figure 1: Added Value of Using ENS210

Features

Temperature sensor (0.2C) Relative humidity sensor (3.5%RH) Temperature operating range to 100C) Relative humidity operating range x 0.75mm Standard (100kbit/s) and fast (400kbit/s) IC Automatic low-power standby when not measuring Active current: 1Hz (1.8V) Standby current: 40nA Digital pre-calibrated relative humidity and temperature sensor Output directly in %RH and Kelvin Wide supply voltage range Long-term stability

Wide sensing range Wide operating voltage Small foot-print Industry standard two-wire interface

Applications

The ENS210 applications include: Mobile phones, tablets and wearables Home and building climate control systems Transportation condition monitoring Wireless sensor nodes Personal health and wellness monitoring Laser printers Home appliance Industrial automation (e.g. server rooms) Baby incubators Weather stations

The internal block diagram ENS210 is shown in Figure 2. The IC (communication) interface is connected to a controller which acts as the command interpreter and as bus master of the internal Advanced Peripheral Bus (APB). The memory and sensors are slaves of the APB. The MTP memory is used to store the sensor calibration parameters and unique ID. To reduce power consumption the controller only powers the measurement engine when needed. Figure 2: Functional Blocks of ENS210

Description

IC bus serial clock input (SCL) IC bus serial bidirectional data line (SDA) Ground supply voltage; must be connected Ground supply voltage; must be connected


 

Some Part number from the same manufacture ams
ENS210-QF_EK_ST
AS3435-EQFM
AS6200-AWLT-S

ams has teamed up with RF Digital to produce sensor products for the Internet of Things (IoT) world.  ams’ AS6200 is a high accuracy temperature sensor in a very small 1.6 mm x 1.0 mm WLCSP

AS6200-WL_EK_AB
AS6200-WL_DK_ST
 
0-C     D-L     M-R     S-Z