|Title||IC HEADPHONE NOISE-CANCEL 36QFN|
|Datasheet||Download AS3435-EQFM datasheet
|Integrated Active Noise Cancelling Solution with Bypass Feature
The AS3415/35 are speaker drivers with Ambient Noise Cancelling function for headsets, headphones or ear pieces. They are intended to improve quality of e.g. music listening, a phone conversation etc. by reducing background ambient noise. The fully analog implementation allows the lowest power consumption, lowest system BOM cost and most natural received voice enhancement otherwise difficult to achieve with DSP implementations. The device is designed to be easily applied to existing architectures. An internal OTP-ROM can be optionally used to store the microphones gain calibration settings. The AS3415/35 can be used in different configurations for best trade-off of noise cancellation, required filtering functions and mechanical designs. The simpler feed-forward topology is used to effectively reduce frequencies typically to 2-3 kHz. The feed-back topology with either or 2 filtering stages has its strengths especially at very low frequencies. The typical bandwidth for a feed-back system is from to 1 kHz which is lower than the feed-forward systems. The filter loop for both systems is determined by measurements, for each specific headset individually, and depends very much on mechanical designs. The gain and phase compensation filter network is implemented with cheap resistors and capacitors for lowest system costs. Ordering Information and Content Guide appear at end of datasheet.
The benefits and features of AS3415/35, Integrated Active Noise Cancelling Solution with Bypass Feature are listed below: Figure 1: Added Value of Using AS3415/35All ANC Topologies No mechanical audio bypass switch Music EQ functionality
Feed Forward, Feed Back and Hybrid Integrated depletion mode transistors Ultra flexible low power EQ circuit
Longest play time Highest audio quality Smallest package Low battery indication Different control interface options Highly innovative production trimming interface Active hearing mode with or without ANC and optional voice EQ
10mW @1.5V stereo ANC; <1A quiescent 2x24mW, 0.1% THD+N 32, 1.5V supply Two different packages available: [5x5mm] 0.5mm pitch [5x5mm] 0.4mm pitch LED driver with selectable driving strength Push Button-, Slide switch- or I˛C control interface OTP production trimming via audio interface Monitor mode functionApplications
The devices are ideal for: Ear pieces Headsets Hands-Free Kits Mobile Phones Voice Communicating DevicesThe functional blocks of AS3415/35 for reference are shown below: Figure 2: AS3415 Block Diagram
|Some Part number from the same manufacture ams|
ams has teamed up with RF Digital to produce sensor products for the Internet of Things (IoT) world. ams’ AS6200 is a high accuracy temperature sensor in a very small 1.6 mm x 1.0 mm WLCSP
AS3953-DK-ST : RFID Transponder Tools Demo Kit for the NFiC IC Specifications: Manufacturer: ams ; Product: Demonstration Kits ; For Use With: AS3953 ; Description/Function: General purpose demo kit is a near field interface, which allows you to evaluate the NFiC chip first hand ; Interface Type: SPI, USB ; Packaging: Bulk ; Series: AS3953
AS3661-BWLT-500 : LED Lighting Drivers Specifications: Manufacturer: ams ; Input Voltage: 2.7 V to 5.5 V ; Maximum Operating Temperature: + 85 C ; Mounting Style: SMD/SMT ; Package / Case: WL-CSP-25 ; Minimum Operating Temperature: - 30 C ; Packaging: Reel
DK-RV-1.8-33 : Power Management IC Development Tools Open Loop Motion System Demo Kit ams SQUIGGLE Micro Motors® / TRACKER Position Sensors Developer's Kit enable fast evaluation of SQUIGGLE micro motors, NSD-2101 Drivers and TRACKER NSE-5310 position sensors. These kits demonstrate the performance of these tiny components - the smallest of their kind - and serve as both mechanica
TMG39931 : Proximity Sensors Gesture, Color, ALS Proximity Vdd 2.36mm ams mobeam Barcode Emulation Sensor Module features a slim, modular package that incorporates an IR LED and factory calibrated LED driver and features advanced Gesture detection, Proximity detection, Digital Ambient Light Sense (ALS), Color Sense (RGBC), and optical pattern generation/transmissio
TSL2584TSV : Light to Digital Converters 33000 Max Lux I2C-1.8, 2.7V ams TSL2584TSV Light-to-Digital Converter is offered as a 1.145mm x 1.66mm digital device in a through-silicon via (TSV) package for next-generation thinner wearable products. This high sensitivity light-to-digital converter transforms light intensity into a digital signal output capable of direc
AS6200-WL_DK_ST : DEMO BOARD FOR AS6200 Specifications: Family: Evaluation Boards - Sensors ; Series: - ; Sensor Type: Temperature ; Sensing Range: * ; Interface: * ; Sensitivity: * ; Voltage - Supply: * ; Embedded: - ; Supplied Contents: Board ; Utilized IC / Part: AS6200
TCS3200D-TR : IC COLOR SENSOR LIGHT-FREQ 8SOIC The ams TCS3200 is a programmable color light-to-frequency converter/sensor. The sensor is a single monolithic CMOS integrated circuit that combines a configurable silicon photodiode and a current-to-frequency converter. The output is a square wave (50% duty cycle) with frequency directly proport
TMG4903 EVM : EVAL MODULE FOR TMG4903 ams and RF Digital have teamed up to produce sensor products for the Internet of Things (IoT) world. ams’ TMG4903 is an ambient light and color (RGB) sensor in a very small 8-SMD (2.0 mm x 5.0 mm) package that has a temperature range of -30ºC to +85ºC. The TMG4903 takes a 1.7 V to
AS5601-SO_RD_ST : REF MODULE FOR AS5601 ams’ AS5601 is a programmable 12-bit magnetic rotary position sensor with incremental quadrature (A/B) outputs. The PUSH output indicates fast airgap changes between the AS5601 and the magnet which can be used to implement a contactless pushbutton function in which the knob can be pres
TCS34727FN : IC COLOR CONV LIGHT-DGTL 6-DFN ams’ TCS34725 and TCS34727 are color light-to-digital converters that provide a digital return of RGB, and clear light sensing values. An IR blocking filter, integrated on-chip and localized to the color sensing photodiodes, minimizes the IR spectral component of the incoming light an
TCS34725FN : IC COLOR CONV LIGHT-DGTL 6-DFN
ASI10592 : NPN Silicon RF Power Transistor.
LTC1326 : LTC1326, Micropower Precision Triple Supply Monitor. Simultaneously Monitors Three Supplies 5V, 3.3V and ADJ 2.5V, 3.3V and ADJ Guaranteed Threshold Accuracy: ± 0.75% Low Supply Current: 20µA Internal Reset Time Delay: 200ms Manual Push-Button Reset Input Active Low and Active High Reset Outputs Active Low "Soft" Reset Output Power Supply Glitch Immunity Guaranteed RESET for 8-Pin SO and MSOP Packages.
XDUY14A4 : Material (Color) = GAASp/gap (Yellow);; Lens = ;; Peak Wave Length = 590;; Iv(ucd) If@10mA Min.= 1900;; Iv(ucd) If@10mA Typ.= 4690.
PM397K : Single, dual and Triple Output 2.5 to 15 Watt Ac/dc Encapsulated Modules.
LM2738XMYEVAL : Eval Board - Dc/dc & Ac/dc (off-line) Smp Programmers, Development System; BOARD EVALUATION LM2738 EMSOP. s: Board Type: Fully Populated ; Main Purpose: DC/DC, Step Down ; Regulator Topology: Buck ; Outputs and Type: 1, Non-Isolated ; Voltage - Output: 3.3V ; Current - Output: 1.5A ; Voltage - Input: 3 ~ 20 V ; Frequency - Switching: 1.6MHz ; Power.
ECH-U1C821GX5 : 820pF Film Capacitor 0603 (1608 Metric); CAP FILM 820PF 16VDC 0603. s: Capacitance: 820pF ; Tolerance: ±2% ; Dielectric Material: Polyphenylene Sulphide (PPS) ; Package / Case: 0603 (1608 Metric) ; Packaging: Digi-Reel® ; Lead Spacing: - ; ESR (Equivalent Series Resistance): - ; Mounting Type: Surface Mount ; : General Purpose ; Lead Free Status: Lead.
OSTYK40119030 : Through Hole, Right Angle Terminal Block - Barrier Block Connectors, Interconnect Through Hole, Right Angle; CONN BARRIER STRIP 19CIRC 8.25MM. s: Color: Black ; Mounting Type: Through Hole, Right Angle ; Number of Rows: 1 ; Pitch: 0.325" (8.255mm) ; Terminal Block Type: Barrier Block ; Number of Circuits: 19 ; : - ; Current: 20A ; Voltage: 300V ; Wire.
TC74VHCT541AFW : Logic - Buffers, Drivers, Receivers, Transceiver Integrated Circuit (ics) Buffer/Line Driver, Non-Inverting Tube 8mA, 8mA 4.5 V ~ 5.5 V; IC BUFF/DVR TRI-ST 8BIT 20SOL. s: Logic Type: Buffer/Line Driver, Non-Inverting ; Package / Case: 20-SOIC (0.295", 7.50mm Width) ; Packaging: Tube ; Mounting Type: Surface Mount ; Number of Bits per Element: 8 ; Number.
MAX7348AEP+T : Interface - Specialized Integrated Circuit (ics) Tape & Reel (TR) 2.4 V ~ 3.6 V; IC KEY SWITCH 2WIRE 20-QSOP. s: Applications: Sound Cards, Players, Recorders ; Interface: I²C ; Voltage - Supply: 2.4 V ~ 3.6 V ; Package / Case: 20-SSOP (0.154", 3.90mm Width) ; Packaging: Tape & Reel (TR) ; Lead Free Status: Lead Free ; RoHS Status:.
MOC3051FVM : Optoisolator - Triac, Scr Output Channel Surface Mount 6-SMD; OPTOCOUPLER TRIAC ZC VDE 6-SMD. s: Mounting Type: Surface Mount ; Package / Case: 6-SMD ; Voltage - Isolation: 7500Vpk ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.
PIC18F6410-E/PT : Embedded - Microcontroller Integrated Circuit (ics) Internal Tray 4.2 V ~ 5.5 V; IC PIC MCU FLASH 16KX16 64TQFP. s: Program Memory Size: 16KB (8K x 16) ; RAM Size: 768 x 8 ; Number of I /O: 54 ; Package / Case: 64-TQFP ; Speed: 25MHz ; Oscillator Type: Internal ; Packaging: Tray ; Program Memory Type: FLASH ; EEPROM Size: - ; Core Processor: PIC ; Data.
7-1611021-1 : Power, Over 2 Amps Relay; RELAY CONTACTOR 4PST 30A 120V. s: Relay Type: Contactor ; Contact Form: 4PST-NO-DM (4 Form X) ; Contact Rating (Current): 30A ; Switching Voltage: 600VAC - Max ; Coil Type: Non Latching ; Coil Current: - ; Coil Voltage: 120VAC ; Turn On Voltage (Max): 93 VAC ; Turn Off Voltage (Min): 20 VAC ; Mounting Type: Chassis Mount ; Termination.
CRT0603-BY-1331ELF : 1.33K Ohm 0.1W, 1/10W Chip Resistor - Surface Mount; RES 1.33K OHM 1/10W .1% 0603 SMD. s: Resistance (Ohms): 1.33K ; Power (Watts): 0.1W, 1/10W ; Tolerance: ±0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: ±25ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.
TNPW080526R7BETA : 26.7 Ohm 0.125W, 1/8W Chip Resistor - Surface Mount; RES 26.7 OHM 1/8W 0.1% 0805. s: Resistance (Ohms): 26.7 ; Power (Watts): 0.125W, 1/8W ; Tolerance: ±0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: ±25ppm/°C ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant.
5-1879668-2 : 365 Ohm 0.5W, 1/2W Through Hole Resistors; RES 365 OHM 1/2W 0.1% AXIAL. s: Resistance (Ohms): 365 ; Power (Watts): 0.5W, 1/2W ; Tolerance: ±0.1% ; Packaging: Bulk ; Composition: Metal Film ; Temperature Coefficient: ±25ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.
0805B471K501C : CAPACITOR, CERAMIC, MULTILAYER, 500 V, X7R, 0.00047 uF, SURFACE MOUNT, 0805. s: Configuration / Form Factor: Chip Capacitor ; Technology: Multilayer ; Applications: General Purpose ; Electrostatic Capacitors: Ceramic Composition ; RoHS Compliant: Yes ; Capacitance Range: 4.70E-4 microF ; Capacitance Tolerance: 10 (+/- %) ; WVDC: 500 volts ; Mounting.
TS53YJ100MR10 : RESISTOR, TRIMMER, CERMET, 1 TURN(S), 0.25 W, 10 ohm. s: Potentiometer Type: Trimmer ; Resistance Taper: Linear ; Technology / Construction: Cermet ; Mounting / Packaging: Surface Mount Technology (SMT / SMD), ROHS COMPLIANT ; Resistance Range: 10 ohms ; Tolerance: 20 +/- % ; Operating Temperature: -55 to 125 C (-67 to 257 F) ; Standards and Certifications:.
272156 : PANEL MOUNT, CABLE TERMINATED, FEMALE, RF CONNECTOR, CRIMP, JACK. s: Applications: RF and Microwave Connectors ; Gender: Female ; Termination Types: Crimp.