Details, datasheet, quote on part number: AS6200-AWLT-S
PartAS6200-AWLT-S
Category
TitleIC SENSOR TEMP SMD
Description

ams has teamed up with RF Digital to produce sensor products for the Internet of Things (IoT) world.  ams’ AS6200 is a high accuracy temperature sensor in a very small 1.6 mm x 1.0 mm WLCSP package. The sensor has ±4°C (0°C to +65°C) and ±1°C (-40°C to +125°C) accuracy at temperature range. The AS6200 takes a 1.8 V to 3.6 V input with low current consumption of 6 µA at 4 Hz. 



Companyams
DatasheetDownload AS6200-AWLT-S datasheet
  
AS6200-AWLT-S photo

Others parts numbering
AS6200-WL_EK_AB: ADAPTER BOARD FOR AS6200
AS6200-WL_DK_ST: DEMO BOARD FOR AS6200
RFD77313: AS6200 SENSOR SHIELD
RFD77810: AS6200 PRECISION TEMPERATURE KIT

 

Features, Applications

The is a high accuracy temperature sensor system that communicates via a 2 wire digital bus with other devices. It consists a Si bandgap temperature sensor, an ADC and a digital signal processor. It has a very high temperature accuracy (0.4C for AS6200) and an ultra-low power consumption (low operation and quiescent current) which makes it ideally suited for mobile/battery powered applications. The is an easy to integrate and use solution, featuring an factory calibrated sensor, integrated linearization and the possibility to use 2 different IC addresses, enabling to use two AS6200 devices on one bus. Additionally the AS6200 temperature sensor system also features an alert functionality, which triggers e.g. an interrupt to protect devices from excessive temperatures. Ordering Information and Content Guide appear at end of datasheet.

The benefits and features of AS6200, Temperature Sensor are listed below: Figure 1: Added Value of Using AS6200

Features
to 125C) (max. values) 6 A @Operation (typ. @ 4 Hz) 0.1 A@Standby (typ.) 1.0 mm (WLCSP)
Low Power Consumption Supply Voltage Range Wide Operating Temperature Small PCB Footprint
Applications

HVAC and thermostat controls Medical instrumentation Body temperature measurement Mobile devices Thermal monitoring for smartphones, tablets and cameras Smart watches and wearables Industrial Industrial automation Cold chain monitoring Figure 2: Typical Application Environment of the AS6200 Temperature Sensor

In Figure 2 a typical application of the AS6200 is shown. It is connected via a serial bus (IC) with a microcontroller. The sensor system is also connected to the microcontroller via the "Alert" pin which can be used to trigger events in case the temperature exceeds defined limits.

The functional blocks of this device are shown below: Figure 3: Functional Blocks of the AS6200

AS6200 Temperature Sensor Analog Frontend VDD Oscillator VSS Control Logic I2C Interface SDA A/D Converter Digital Signal Processing Alarm Registers ADD0 SCL

In Figure 3 all relevant blocks of the AS6200 temperature sensor are shown. The sensing element a Si bipolar transistor. The analog signal is transformed by the A/D converter in a digital signal which is processed by the DSP and written into the registers. The data in the register can be accessed by the serial bus (IC).


 

Some Part number from the same manufacture ams
AS6200-WL_EK_AB

ams has teamed up with RF Digital to produce sensor products for the Internet of Things (IoT) world.  ams’ AS6200 is a high accuracy temperature sensor in a very small 1.6 mm x 1.0 mm WLCSP

AS6200-WL_DK_ST
 
0-C     D-L     M-R     S-Z