|Category||Passive Components => Resistors => Film Resistors => 8832277|
|Title||Thick Film Resistors - SMD 0.33W .499ohms 1% 100ppm|
Vishay Dale RCWH Thick Film Surface Mount Chip Resistors offer extremely low resistance values (0.01 to 0.976) and are suitable for current sensing and shunt applications. The RCHW series features lead (Pb)-free solder contacts on Ni barrier layer, and a metal glaze on high quality ceramic along with a protective overglaze.
|Datasheet||Download RCWH0805R499FKEA datasheet
|Power Rating||330 mW (1/3 W)|
|Temperature Coefficient||100 PPM / C|
|Operating Temperature Range||- 55 C to + 155 C|
|Case Code - in||0805|
|Case Code - mm||2012|
|Type||Extremely Low Value|
|Others parts numbering|
|RCWH080547L5FNEA: Thick Film Resistors - SMD 0.33W .0475ohms 1% 200ppm|
|RCWH080575L0FKEA: Thick Film Resistors - SMD 0.33W .075ohms 1% 100ppm|
|RCWH080551L1FKEA: Thick Film Resistors - SMD 0.33W .0511ohms 1% 100ppm|
|RCWH0805R100FKEA: Thick Film Resistors - SMD 0.33W .1ohms 1% 100ppm|
|RCWH0805R750FKEA: Thick Film Resistors - SMD 0.33W .75ohms 1% 100ppm|
|RCWH0805R392FKEA: Thick Film Resistors - SMD 0.33W .392ohms 1% 100ppm|
|RCWH0805R475FKEA: Thick Film Resistors - SMD 0.33W .475ohms 1% 100ppm|
|RCWH080533L2FNEA: Thick Film Resistors - SMD 0.33W .0332ohms 1% 200ppm|
|RCWH080510L0JQEA: Thick Film Resistors - SMD 0.33W .01ohms 5% 400ppm|
|RCWH080520L0FMEA: Thick Film Resistors - SMD 0.33W .02ohms 1% 300ppm|
|RCWH080515L0JQEA: Thick Film Resistors - SMD 0.33W .015ohms 5% 400ppm|
|RCWH0805R200FKEA: Thick Film Resistors - SMD 0.33W .2ohms 1% 100ppm|
|RCWH080530L1FNEA: Thick Film Resistors - SMD 0.33W .0301ohms 1% 200ppm|
|RCWH0805R301FKEA: Thick Film Resistors - SMD 0.33W .301ohms 1% 100ppm|
|RCWH0805R332FKEA: Thick Film Resistors - SMD 0.33W .332ohms 1% 100ppm|
|RCWH0805R267FKEA: Thick Film Resistors - SMD 0.33W .267ohms 1% 100ppm|
|RCWH080530L0FMEA: Thick Film Resistors - SMD 0.33W .03ohms 1% 300ppm|
Thick Film Surface Mount Chip Resistors, Wraparound, Extremely Low Value 0.976 )
Extremely low resistance values to 0.976 Suitable for current sensing and shunts Metal glaze on high quality ceramic Protective overglaze Lead (Pb)-free solder contacts on Ni barrier layer Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
Notes Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material. Part marking: reference "Surface Mount Resistor Marking" (www.vishay.com/doc?20020). (1) Tight tolerance % is available for resistance values above 0.200. (2) Use E24 decade values for 5.0 % tolerance parts and E96 decade values for 0.5 % and 1.0 Refer to "Standard Decade" table (www.vishay.com/doc?31001).
Global Part Numbering example: RCWH0805R499FKEA (visit www.vishay.net Vishay Dale parts numbering manual for all options)PACKAGING (2 digits) EA = lead (Pb)-free, tape / reel
PARAMETER Operating temperature range Maximum operating voltage Insulation voltage Uins (1 min) Insulation resistance Weight/1000 pieces (typical) UNIT x R)1/2
Document Number: 31110 1 For technical questions, contact: email@example.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TEST Thermal shock Short time overload High temperature exposure Temperature cycling Biased humidity Mechanical shock Vibration Operational life Resistance to solder heat Moisture resistance CONDITIONS OF TEST MIL-STD-202, method to +125 °C, 300 cycles at each extreme 2 x rated power; duration according the model MIL-STD-202, method = 125 °C, 0 % power JESD 22, method JA-104, 1000 cycles to +125 °C) MIL-STD-202, method °C/85 % RH, R)1/2 MIL-STD-202, method 213, condition C, 10 g's, 6 ms (half sine), 3 directions MIL-STD-202, method 204, 5 g's, 20 min, 12 cycles, 3 directions, Hz MIL-STD-202, method °C at rated power MIL-STD-202, method +260 °C solder, 12 s dwell, 25 mm/s emergence MIL-STD-202, method 0 % power, 7a and 7b not required TEST LIMITS
MODEL RCWH0805 REEL TAPE WIDTH 8 mm/punched paper DIAMETER 180 mm/7" PITCH 4 mm PIECES/REEL 5000 CODE EA
Document Number: 31110 2 For technical questions, contact: firstname.lastname@example.org THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
|Some Part number from the same manufacture Vishay/Dale|
Vishay Dale RCWH Thick Film Surface Mount Chip Resistors offer extremely low resistance values (0.01 to 0.976) and are suitable for current sensing and shunt applications. The RCHW series features lead
CCF55154KFKR36 : Metal Film Resistors, Industrial, 1% Tolerance
893D335X9050C2TE3 : 3.3µF Tantalum Capacitor 2312 (6032 Metric) 50V; CAP TANT 3.3UF 50V 10% 2312 Specifications: Capacitance: 3.3µF ; Voltage - Rated: 50V ; Tolerance: ±10% ; Features: Fail Safe with Built-in Fuse ; Operating Temperature: -55°C ~ 125°C ; Lead Spacing: - ; ESR (Equivalent Series Resistance): 2.400 Ohm ; Lifetime @ Temp.: - ; Mounting Type: Surface Mount ; Type: Molded ; Package
GBPC608-E4/51 : Bridge Rectifiers 6.0 Amp 800 Volt Specifications: Manufacturer: Vishay ; Product Category: Bridge Rectifiers ; RoHS: Details ; Product: Single Phase Bridge ; Peak Reverse Voltage: 800 V ; Maximum RMS Reverse Voltage: 560 V ; Max Surge Current: 175 A ; Forward Voltage Drop: 1 V ; Maximum Reverse Leakage Current: 5 uA ; Maximum
RCL12183R00JNEK : 3 Ohm 1W Chip Resistor - Surface Mount; RES 3.0 OHM 1W 5% 1218 WIDE Specifications: Resistance (Ohms): 3 ; Power (Watts): 1W ; Tolerance: ±5% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: ±200ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
LCD-240Y160A-CTF-V : LCD DOT MATRIX GRAPHIC DISPLAY MODULE,WHITE Specifications: Display Type: Dot Matrix
LCD-320H240D-AGB-V : LCD DOT MATRIX GRAPHIC DISPLAY MODULE,WHITE Specifications: Display Type: Dot Matrix
MMSZ5229BS : 3.9 V, 0.5 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE Specifications: Diode Type: VOLTAGE REGULATOR DIODE ; RoHS Compliant: RoHS
RNN60C8060BMM76 : RESISTOR, METAL FILM, 0.125 W, 0.1 %, 50 ppm, 806 ohm, THROUGH HOLE MOUNT Specifications: Category / Application: General Use ; Technology / Construction: MetalFilm ; Mounting / Packaging: ThroughHole, Axial Leads, AXIAL LEADED ; Resistance Range: 806 ohms ; Tolerance: 0.1000 +/- % ; Temperature Coefficient: 50 Â±ppm/Â°C ; Power Rating: 0.1250 watts (1.68E-4 HP) ; Operati
5KA24/66 : 5000 W, UNIDIRECTIONAL, SILICON, TVS DIODE Specifications: Configuration: Single ; Direction: Unidirectional ; Package: PLASTIC, CASE P600, 2 PIN ; Pin Count: 2 ; Number of Diodes: 1 ; VBR: 26.7 to 32.6 volts
S1812R-105K : RF Inductors 1000uH 10%. s: Manufacturer: API Delevan ; Product Category: RF Inductors ; RoHS: Details ; Inductance: 1 mH ; Tolerance: 10 % ; Maximum DC Current: 60 mAmps ; Maximum DC Resistance: 55 Ohms ; Self Resonant Frequency: 2 MHz ; Q Minimum: 40 ; Operating Temperature Range: - 55 C to + 125 C ; Termination Style: SMD/SMT ; Package / Case:.
06031A100JAT2A : Multilayer Ceramic Capacitors (MLCC) - SMD/SMT 0603 10pF 100volts C0G 5%. AVX 's EIA Class I C0G ( NPO ) ceramic material is one of the most stable capacitor dielectrics on the market. The C0G ( NPO ) capacitors offer significant advantages, including life-time capacitance change of less than ±0.1%, which is one-fifth of that shown by other dielectrics.
PBRC2.00HR50X000 : Resonators 2.00MHZ .5% W/CAP. s: Manufacturer: AVX ; Product Category: Resonators ; RoHS: Details ; Frequency: 2 MHz ; Tolerance: 0.5 % ; Series: PBRC ; Termination Style: SMD/SMT ; Operating Temperature Range: - 40 C to + 85 C ; Dimensions: 3.4 mm W x 7.4 mm L x 2 mm H ; Packaging: Reel ; Load Capacitance: 33 pF ; Type: MHz Band Ceramic Chip.
PDB181-GTR01-103A2 : Potentiometers 10KOHMS KNURLED SNG SOLDER LUGS. s: Manufacturer: Bourns ; Product Category: Potentiometers ; RoHS: Details ; Product: Musical Syst Potentiometer ; Resistance: 10 KOhms ; Power Rating: 100 mWatts ; Tolerance: 20 % ; Taper: Audio ; Element Type: Carbon ; Number of Turns: 1 ; Shaft Type: Knurled / Serrated ; Mounting Style: Panel.
1130-100K-RC : HIGH CURRENT CHOKE, 10UH, 17A, 10%. s: Inductance: 10µH ; Inductance Tolerance: ± 10% ; DC Resistance Max: 0.006ohm ; DC Current Rating: 17A ; Q Factor: - ; Self Resonant Frequency: - ; Q Test Frequency: - ; No. of Pins: 2 ; Inductor Case Style: Radial Leaded ; Lead Spacing: 20.828mm.
SMR46B-10-1-10K : Precision Potentiometers 5W 10Kohms 3% Switch Pot. s: Manufacturer: ETI Systems ; Product Category: Precision Potentiometers ; RoHS: Details ; Product: Precision Potentiometer ; Resistance: 10 KOhms ; Power Rating: 5 Watts ; Tolerance: 3 % ; Mounting Style: Panel ; Element Type: Wirewound ; Number of Turns: 10 ; Linearity: +/- 0.3 % ; Series:.
18-10 : Resistor Hardware RES MOUNTING BRACKET. s: Manufacturer: Ohmite ; Product Category: Resistor Hardware ; RoHS: No ; Packaging: Bulk ; Factory Pack Quantity: 10.
EVU-F3MFL3B24 : Potentiometers 20KOhms 9MM VERT MET BUSHING. s: Manufacturer: Panasonic ; Product Category: Potentiometers ; RoHS: Details ; Product: Potentiometer ; Resistance: 20 KOhms ; Power Rating: 50 mWatts ; Tolerance: 20 % ; Number of Turns: 1 ; Shaft Type: Flatted / D ; Mounting Style: Through Hole ; Termination Style: Pin.
PE-68017S : Transformers Audio & Signal MOD. s: Manufacturer: Pulse ; Product Category: Transformers Audio & Signal ; RoHS: No ; Isolation Voltage: 1500 Volts ; Termination Style: Through Hole ; Dimensions: 25.4 mm L x 5.33 mm W x 11.43 mm H ; Product: 10 Base-T Interface Modules ; Product Type: Interface Modules ; Factory Pack Quantity: 15.
CRCW02012K40FKED : Thick Film Resistors - SMD 1/20watt 2.4Kohms 1% 100ppm. s: Manufacturer: Vishay ; Product Category: Thick Film Resistors - SMD ; RoHS: Details ; Resistance: 2.4 KOhms ; Tolerance: 1 % ; Power Rating: 50 mWatts ; Temperature Coefficient: 100 PPM / K ; Series: CRCW ; Termination Style: SMD/SMT ; Package / Case: 0201 (0603 metric) ; Voltage Rating:.
7443556680 : Power Inductors 6.8uH, 10mA DCR MAX=4.1, +/-20%. The HCI SMD Flat Wire Inductors by Wurth Electronics are magnetically shielded and have a flat wire coil for low losses at high frequency. Wurth Electronics' HCI SMD Flat Wire Inductors have a low stray field, operating temperature of -40ºC to +125ºC/+150ºC, and a reflow solder recommended.
744028003 : Power Inductors 1100mA, 3.3uH DCR Max=0.22, +/-30%. The Wurth Electronics SMD-Shielded Tiny Power Inductor WE-TPC is an extremely flat power inductor with a high current capability, high reliability, and perfect soldering characteristics because of an integrated soldering pad. Wurth offers the Tiny Power Inductor WE-TPC with magnetic shielding for a low leakage.
260-27-RC : Thick Film Resistors - SMD 1/10WATT 27OHMS. s: Manufacturer: Xicon ; Product Category: Thick Film Resistors - SMD ; RoHS: Details ; Resistance: 27 Ohms ; Tolerance: 5 % ; Power Rating: 100 mWatts ; Temperature Coefficient: 200 PPM / C ; Series: 260 ; Termination Style: SMD/SMT ; Package / Case: 0805 (2013 metric) ; Voltage Rating: 150 Volts ; Operating.
RC0603JR-130RL : Thick Film Resistors - SMD ZERO OHM JUMPER. s: Manufacturer: Yageo ; Product Category: Thick Film Resistors - SMD ; RoHS: Details ; Resistance: 0 Ohm ; Tolerance: 5 % ; Power Rating: 100 mWatts ; Temperature Coefficient: 100 PPM / C ; Series: RC ; Termination Style: SMD/SMT ; Package / Case: 0603 (1608 metric) ; Voltage Rating: 100 Volts ; Operating.
74438321010 : Fixed Inductors WE-MAPI SMD PWR IND 1.0uH 1.25A 196mOhm. s: Manufacturer: Wurth Electronics ; Inductance: 1 uH ; Tolerance: 30 % ; Maximum DC Current: 1.25 A ; Maximum DC Resistance: 196 mOhms ; Operating Temperature Range: - 40 C to + 125 C ; Self Resonant Frequency: 90 MHz ; Shielding: Shielded ; Termination Style: SMD/SMT ; Package / Case: 1008 (2520.
LQM2HPN3R3MGCL : Fixed Inductors 1008 3.3uH +/-20% 1000mA DCR .2ohm. Murata LQM Series Fixed Inductors offer a wide range of current ratings, inductance values, and sizes - all with a magnetically shielded structure and low DC Resistance. LQM inductors feature a multi-layer type ferrite core and provide a current rating up to 1800mA. LQM devices are ideal for use in voltage.
FGH0H105ZF : Supercapacitors / Ultracapacitors 1F 5.5volts Radial Super Cap. FC Series Electric Double Layer (EDLC) Supercaps are surface mount type capacitors intended for high energy storage applications. This series is designed specifically for reflow soldering, allowing them to be attached to a printed circuit board (PCB) directly. s: Manufacturer: Kemet.
TG04-TDK1N1RL : Transformers Audio & Signal ISO MOD SMD GullWing E4/STM-1/STS-3/OC-3. s: Manufacturer: HALO Electronics ; Product Category: Transformers Audio & Signal ; Brand: HALO Electronics ; Packaging: Tube ; Series: smd-e4.