Details, datasheet, quote on part number: 885012005009
Part885012005009
Category
TitleCAP CER 22PF 10V C0G/NP0 0402
Description
CompanyWurth Electronics
DatasheetDownload 885012005009 datasheet
  
885012005009 photo

Others parts numbering
885012005029: CAP CER 47PF 16V C0G/NP0 0402
885012206006: CAP CER 470PF 10V X7R 0603
885012006029: CAP CER 1000PF 16V C0G/NP0 0603
885012208046: CAP CER 1000PF 25V X7R 1206
885012208009: CAP CER 0.1UF 10V X7R 1206
885012208026: CAP CER 10000PF 16V X7R 1206
885012209019: CAP CER 0.1UF 25V X7R 1210
885012209028: CAP CER 10UF 25V X7R 1210
885362211015: CAP CER 2200PF 250VAC X7R 1812
885012005053: CAP CER 4.7PF 50V C0G/NP0 0402
885012006046: CAP CER 1.5PF 50V C0G/NP0 0603
885012006010: CAP CER 220PF 10V C0G/NP0 0603
885012006039: CAP CER 150PF 25V C0G/NP0 0603
885012206048: CAP CER 0.22UF 16V X7R 0603
885012007058: CAP CER 150PF 50V C0G/NP0 0805
885012105007: CAP CER 2.2UF 6.3V X5R 0402
885012206072: CAP CER 0.15UF 25V X7R 0603
885012006012: CAP CER 470PF 10V C0G/NP0 0603
885012006042: CAP CER 470PF 25V C0G/NP0 0603

 

Features, Applications

Properties Capacitance Rated voltage Dissipation factor 1±0.2 Vrms, 1 MHz ±10% Isolation Resistance Apply UR for 120 s max. Test conditions 1±0.2 Vrms, 1 MHz UR DF RIso Value 10 G Unit pF V (DC) Tol. ± 5% max. typ.

Precondition for Class II MLCC measurement: Apply a preheat treatment @150±10°C for 1 hour. The measurement should be applied after 24±2 hrs the part was stored under ambient conditions. There is not any precondition necessary for Class I MLCC.

General Purpose MLCC Ceramic Type: Temperature Coeffecient: Storage Conditions: Operating Temperature: Dielectric Strength: General Test conditions: FIT according to

DESCRIPTION

NP0 Class ± 30 ppm max. -55 °C bis °C 5 sec. @250% UR; Charge & Discharge Current 25°C, 30-70% RH; if not specified differently separate documentation

1.0 REV 2014-11-10 DATE SSt BY PSL CHECKED Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. www.we-online.com eiSos@we-online.com

This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Properties Adhesive Strength of Termination Definition Vibration Resistance to Solder Heat Solder Temperature Dipping Time Specific 10 ±1 sec; 10 ±1 sec; 10N all 3 directions, 2 hours each Hz, amplitude 10 ±1 sec Refer to Soldering Profile

Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. www.we-online.com eiSos@we-online.com Order.- No. SIZE A4

This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Profile Feature Preheat - Temperature Min (Tsmin) - Temperature Max (Tsmax) - Time (ts) from (Tsmin to Tsmax) Ramp-up rate (TL to TP) Liquidous temperature (TL) Time (tL) maintained above TL Peak package body temperature (Tp) Time within 5°C of actual peak temperature (tp) Ramp-down rate (TP to TL) Time 25°C to peak temperature refer to IPC/JEDEC J-STD-020D Pb-Free Assembly 200°C 60-120 seconds 3°C/ second max. 217°C 60-150 seconds See Table H3 20-30 seconds 6°C/ second max. 8 minutes max.

Package Thickness PB-Free Assembly PB-Free Assembly PB-Free Assembly refer to IPC/JEDEC 2.5 mm Volume mm³ 260°C 250°C Volume mm³ 250°C 245°C Volume mm³ 260°C 245°C

Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. www.we-online.com eiSos@we-online.com Order.- No. SIZE A4

This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.


Some Part number from the same manufacture Wurth Electronics
885012005029
885012206006
885012006029
885012208046
885012208009
885012208026
885012209019
885012209028
885362211015
885012005053
885012006046
885012006010
885012006039
885012206048
885012007058
885012105007
885012206072
885012006012
885012006042

692901100000 : Usb Cable Assembly 3.28' (1.00m); CABLE USB A-MALE TO A-MALE 1M Specifications: Style: - ; Length: 3.28' (1.00m) ; Configuration: A Male to A Male ; Shielding: Shielded ; Specifications: USB 3.0 ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

744823210 : 2A Common Mode Choke Filter - Power Line; CHOKE TOROID 10MH 2A VERTICAL Specifications: Inductance: 10mH ; Impedance: - ; DC Resistance (DCR): 125 mOhm Max ; Current: 2A ; Filter Type: Power Line ; Mounting Type: Through Hole ; Package / Case: Vertical, 4 PC Pin ; Packaging: Bulk ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

615006141121 : Through Hole Modular - Jack Connectors, Interconnect Jack; CONN 6-6 MOD JACK PLASTIC Specifications: Connector Type: Jack ; Features: Board Lock ; LED Color: Does Not Contain LED ; Mounting Type: Through Hole ; Number of Ports: 1 ; Number of Positions/Contacts: 6p6c (RJ11, RJ12, RJ14, RJ25) ; Number of Rows: 1 ; Ratings: - ; Shielding: Shielded ; Tab Direction: Down ; Termination: S

7447779168 : Power Inductors Shielded Pwr Inductr 0.87A 0.38Ohm 68uH Wurth Electronics WE-PD SMD Shielded Power Inductors are magnetically shielded for a low leakage field and low self-losses. With a high storage capacity, the Wurth WE-PD Inductors feature the highest possible current loading for SMD inductors. The Wurth Electronics WE-PD SMD Shielded Power Inductors

746105-9 : - Through Hole Terminal - Screw Connectors, Interconnect Through Hole; CONN SOCKET PCB PIN-PLATE M6 Specifications: Current Rating: - ; Features: - ; Mounting Type: Through Hole ; Number of Legs: 10 ; Screw Size: M6 ; Termination: Press-Fit, Solder ; Terminal Type: Screw Terminal, Power Tap ; Contact Finish: - ; Contact Material: Copper ; Material - Insulation: - ; Screw Material: - ; Screw Finish

744874220 : Arrays, Signal Transformer Inductors, Coils, Choke 2.47A Surface Mount; COUPLED INDUCTOR FLYBACK 22UH Specifications: DC Resistance (DCR): 80 mOhm Max ; Current: 2.47A ; Number of Coils: 2 ; Mounting Type: Surface Mount ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

158563427 : High Power LEDs - White WL-SWTP SMD Top View PLCC4 5630 SnrsCRI80 Wurth Electronics SMD White Top View LEDs enable fast switching, low power consumption, and are available in compact ceramic and PLCC packages. With a wide viewing angle and high brightness, these top view LEDs are ideal for a wide range of general lighting applications.Specifications

744720 : KIT DESIGN FOR LINEAR TECH Wurth Electronics provides a wide range of design kits created in-house. These design kits are great for engineers to use during their development work. A product index of part numbers and part values is indicated in each kit which allows for users to confidently pick and choose a part to test in

860040378015 : Aluminium Electrolytic Capacitors - Leaded WCAP-ATUL 16V 2200uF 20% ESR=26mOhms Wurth Electronics THT Aluminum Electrolytic Capacitors are available in V-Chip, Radial THT, and Snap-in designs with high capacitances and voltages. These are provided for the standard application with 85ºC and 1000h.Specifications: Series: WCAP-ATUL ; Termination Style: Radial ; Capa

 
0-C     D-L     M-R     S-Z