Details, datasheet, quote on part number: TGHPV1R00KE
PartTGHPV1R00KE
CategoryPassive Components => Resistors => Film Resistors => 8841441
TitlePlanar Resistors - Chassis Mount SOT-227 600W 1 OHM
DescriptionOhmite TGH600 Series Thick Film SOT227 Resistors are ideally suited for high-frequency and pulse-load applications. The TGH600 series resistors are designed for direct mounting onto a heatsink. The TGH600 resistors provide up to 600W of power dissipation. Popular applications include variable speed drives, power supplies, control devices, telecom, robotics, motor controls, and other switching designs.
CompanyOhmite
DatasheetDownload TGHPV1R00KE datasheet
Specifications 
SeriesTGH600
Resistance1 Ohms
Power Rating600 W
Tolerance10 %
Temperature Coefficient250 PPM / C
Voltage Rating500 V
Length38.3 mm
Width25.4 mm
Height12.2 mm
PackagingBulk
TGHPV1R00KE photo

Others parts numbering
TGHPV1K00KE: Planar Resistors - Chassis Mount SOT-227 600W 1000OHM
TGHPV50R0KE: Planar Resistors - Chassis Mount SOT-227 600W 50 OHM
TGHPV5R00KE: Planar Resistors - Chassis Mount SOT-227 600W 5 OHM
TGHPV100RKE: Planar Resistors - Chassis Mount SOT-227 600W 100 OHM
TGHPV10R0KE: Planar Resistors - Chassis Mount SOT-227 600W 10 OHM

 

Features, Applications

Due to the TGH600's non-inductive design, they are deally suited for high-frequency and pulseload applications. The TGH600 series resistors are designed for direct mounting onto a heatsink and provides to 600 watts of power dissipation. Popular applications include variable speed drives, power supplies, control devices, telecom, robotics, motor controls, and other switching designs.

Ohmic range to 1K Resistance tolerance 5% on request Temperature coefficient 250ppm/C (others on request) Maximum working voltage 500V DC (higher voltage on request) Power rating at 85C bottom case temperature Electric strength voltage Dielectric strength to 4,000VDC against ground Isolation voltage between R1 and 1,000V on request Partial discharge 2kVrms, <80pC Insulation resistance 10G min. at 1kV Short time overload 1.25 x rated power at 85C bottom case temp. for 10 sec, = 0.4% max. Operating temperature to +155C

Best results can be reached by using a thermal transfer compound with a heat conductivity 2.9W/mK or better.

Test Method Moisture Resistance MIL-Std-202, Method 106 Thermal shock Mil-Std-202, Method 107, Cond F Vibration, High Frequency MIL-Std-202, Method 204, Cond + 0.001W) max + 0.01W) max + 0.01W) max

Terminal Strength MIL-Std-202, Method 211, Cond A (pull test) = 0.01W) max Life 20 years (120,000 hours) Operating failure rate x 10-7 fail/hour. Requirements to be achieved under the following conditions: Tamb=25C, THS=70C, Papplied=Pn

SOT227 Series Wattage = 600W Resistance Value Example: = 10,000 Tolerance = 10%
THIS PRODUCT IS DESIGNED FOR USE WITH PROPER HEATSINKING.

Maximum base plate temperature of the resistor must be monitored and kept within specified limits to establish the power rating. Best technique is to attach a thermocouple to the side of the base plate of the resistor. Temperature of plastic housing or heat sink cannot be used to establish rating of the resistor.


 

Some Part number from the same manufacture Ohmite
TGHPV1K00KE Ohmite TGH600 Series Thick Film SOT227 Resistors are ideally suited for high-frequency and pulse-load applications. The TGH600 series resistors are designed for direct mounting onto a heatsink. The TGH600
TGHPV50R0KE
TGHPV5R00KE
TGHPV100RKE
TGHPV10R0KE
 
0-C     D-L     M-R     S-Z