|Category||Electromechanical => Motors & Drives => AC, DC & Servo Motors => 8841465|
|Title||AC, DC & Servo Motors Parallax Feedback 360 Servo|
|Datasheet||Download 900-00360 datasheet
|Product Category||AC, DC & Servo Motors|
|Voltage Rating||8.4 VDC|
|Minimum Holding Torque||2.2 kg|
|Motor Drive Type||DC Servo|
Web Site: www.parallax.com Forums: forums.parallax.com Sales: email@example.com Technical: firstname.lastname@example.org
The Parallax Feedback 360° High Speed Servo provides the functionality of a light-duty standard servo, continuous rotation servo, high-speed servo, and encoder in one convenient package. Like most servos, the Feedback 360° is controlled 50 Hz PWM signal. What sets it apart is a return signal line from an internal Hall effect sensor system that provides digital angular position feedback. Utilizing this feedback signal, your application can make the servo to turn to and hold any angle, much like a standard servo but with an unlimited range of motion. Or, rotate the servo continuously at a controlled, verifiable speed as a robot drive motor. Control signal response is nicely linear across the speed control range. BlocklyProp blocks and user-friendly C Propeller C libraries are in the works. Low-level position control example C code is discussed in this guide.Features
Bidirectional, continuous, feedback-controllable, low-load rotation from to 120 RPM PWM positional feedback across entire RPM range Internal Hall effect position sensor not subject to wear or sensor deadband as are potentiometer-style feedback systems No need to manually "center" the servo 3-pin ground-power-signal cable plugs onto the Activity Board's 3pin header Separate single wire with female connector supplies feedback to an I/O pin RPM: 120 w/feedback control, 140 max V, no load Gears: POM Case: Nylon & fiberglass Spline: mm OD Peak stall torque V: 2.5 kg-cm (34.7 oz-in) Voltage requirements: 6 VDC typical, 58.4 VDC max range Current requirements: mA 10) idle, mA 40) no-load, 1200 mA stalled Control signal: PWM, V 50 Hz, 12801720 µs Control signal zero-speed deadband: µs 15) Feedback sensor: Hall effect Feedback signal: PWM, 3.3V, 910 Hz, 2.7%97.1% duty cycle Product weight: 40 g) Cable length: in (250 mm) Dimensions: approx. x 20 mm) Mounting hole spacing: mm on center Operating temperature range: to +70 °C)Specifications
Check for the latest version of this document, free software, and example programs from the Feedback 360° High-Speed Servo product page. Go to www.parallax.com and search 900-00360.
Pin Name Description Servo input, PWM, 50 Hz, 12801720 µs Servo power supply Min 3.3 5* Typical Max Units V Yellow Feedback Servo output, PWM, 910 Hz, 2.797.1% duty cycle White Control Red Vservo
Black Vss Ground, common ground with microcontroller v *5 VDC is absolute minimum required for no-load angular position control. to 8 VDC is recommended for continuous rotation speed control.
The servo requires an input control signal sent from your microcontroller via the white wire connection. This signal, labeled tControl in the diagram and table below, is the time in microseconds 5 V high pulse. The control signal must be sent every 20 ms.
The duration (pulse width) of tControl determines servo rotation speed and direction as shown in the table below. The top speed will vary with supply voltage and load. Clockwise (faster to slower) tControl, 10 µs RPM, 1280....1480 140...0 Stop 1480...1520 0 Counterclockwise (slower to faster) 1520....1720 0...-140
The rotational velocity response to tControl is fairly linear. This example graph is for V, no load.
The servo sends a feedback output signal to your microcontroller via the yellow wire connection. This signal, labeled tCycle in the diagrams and equations below, has a period 1/910 Hz (approx. 1.1 ms), 5%. Within each tCycle iteration, tHigh is the duration in microseconds 3.3 V high pulse. The duration of tHigh varies with the output of a Hall-effect sensor inside of the servo. The duty cycle of this signal, tHigh / tCycle, ranges from 2.9% at the origin to 97.1% approaching one clockwise revolution.
Duty cycle corresponds to the rotational position of the servo, in the units per full circle desired for your application.
|Some Part number from the same manufacture Parallax Inc|
|27228 Specifications: For Use With/Related Products: BASIC Stamp® ; Module/Board Type: Activity Board|
|27111 Specifications: Accessory Type: Serial Adapter ; For Use With/Related Products: BASIC Stamp® 1 Module ; Lead Free Status: Contains Lead|
|32312 Specifications: Accessory Type: Adapter, microSD™ Card ; For Use With/Related Products: Propeller Proto Board, Super Carrier Board, Board of Education (BOE) ; Lead Free Status: Lead Free ; RoHS Status:|
|28030 Specifications: Accessory Type: USB to RS232 Adapter ; For Use With/Related Products: Parallax Motherboards ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant|
|27904 Specifications: Type: Alcohol, Benzine ; Voltage - Supply: 5V ; Operating Temperature: -10°C ~ 50°C ; Accuracy: - ; Oxygen Range: - ; Current - Supply: 250mA ; Output: 0 ~ 5V ; Lead Free Status: Lead Free|
|28126 Specifications: Kit Type: Sensors ; Kit Contents: Parts and Instructions ; Packaging: Cardboard Box|
|28127 Specifications: Lead Free Status: Lead Not Applicable ; RoHS Status: RoHS Not Applicable|
|28905 Specifications: Main Purpose: Game Kit ; Primary Attributes: AVRSimon Game Kit, Memory Game ; Secondary Attributes: - ; Supplied Contents: Board, Components - for assembly ; Utilized IC / Part: ATTiny|
|27100 Specifications: Type: Microcontroller ; Contents: Board ; For Use With/Related Products: BASIC Stamp®|
|27238 Specifications: Type: Starter Kit ; Contents: Module, Demo Board, Manual, CD-Rom, Cable and more ; For Use With/Related Products: BASIC Stamp®|
|27906 Specifications: For Use With/Related Products: BASIC Stamp® ; Module/Board Type: Activity Board|
|30010 Specifications: Accessory Type: Logic Analyzer ; For Use With/Related Products: BASIC Stamp®|
|BS1-IC Specifications: For Use With/Related Products: BASIC Stamp® ; Module/Board Type: BASIC Stamp I Module|