Details, datasheet, quote on part number: NL3S22UHMUTAGbaebfwqsuytr
PartNL3S22UHMUTAGbaebfwqsuytr
CategorySemiconductors => Switch ICs => 8844069
TitleUSB Switch ICs USB 2.0 + AUDIO SWITCH
DescriptionON Semiconductor NL3S22 USB 2.0 + Audio Switches are double-pole/double-throw (DPDT) analog switches for routing high speed differential data and audio. The high-speed data path and differential channels are compliant with High Speed USB 2.0, Full Speed USB 1.1, Low Speed USB 1.0 and any generic UART protocol. The multipurpose audio path is capable of passing signals with negative voltages as low as 2V below ground and features shunt resistors to reduce Pop and Click noise in the audio system.baebfwqsuytr
CompanyON Semiconductor
DatasheetDownload NL3S22UHMUTAGbaebfwqsuytr datasheet
Specifications 
ProductUSB 2.0 Audio Switches
Configuration2 x DPDT
On Resistance - Max6.63 Ohms
On Time - Max3.4 us
Off Time - Max157 ns
Operating Supply Voltage2.7 V to 3.6 V
Maximum Operating Temperature+ 85 C
Mounting StyleSMD/SMT
Package/CaseUQFN-10
PackagingCut Tape, Reel
NL3S22UHMUTAGbaebfwqsuytr photo

Others parts numbering
NL3S22SMUTAG: USB Switch ICs USB 2.0 + AUDIO SWITCH WI
NL3S22AHMUTAG
NL3S2223MUTBG New Technology: USB Switch ICs DPDT USB ANALOG SWITCH

 

Features, Applications

The is a double-pole/double-throw (DPDT) analog switch for routing high speed differential data and audio. The differential channels are compliant with High Speed USB 2.0, Full Speed USB 1.1, Low Speed USB 1.0 and any generic UART protocol. The multi-purpose audio path is capable of passing signals with negative voltages as low 3 V below ground and features shunt resistors to reduce Pop and Click noise in the audio system. For the NL3S22AH, the audio path (AUDP/AUDN) will be selected with SEL=0 with the device enabled (EN = 1). For the NL3S22UH, the high speed data path (HDP/HDN) will be selected with SEL=0 with the device enabled (EN = 1).

Features

VCC Range: 3.6 V Control Pins Compatible with 1.8 V Interfaces ICC: 60 mA (Typ) ESD Performance: 2 kV HBM Available mm UQFN10 These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS Compliant Input Signal Range: 3.7 V RDS(on): 5.4 W (Typ) CON: 8.7 pF (Typ) Data Rate: USB to 480 Mbps Bandwidth: >811 MHz

= AY for = DW for M = Date Code G = Pb-Free Device (Note: Microdot may be in either location)

Device NL3S22AHMUTAG Package UQFN10 (Pb-Free) UQFN10 (Pb-Free) Shipping 3000 / Tape & Reel 3000 / Tape & Reel

Input Signal Range: 3.0 V RDSON: 0.56 W (Typ) RON(FLAT): 0.004 W (Typ) THD+N: 113 dB (RL W / VIS = 1.0 VRMS) 109 dB (RL W / VIS = 0.4 VRMS) Smartphones Tablets USB 2.0 Hosts/Peripherals Audio / High-Speeds Data Switching USB Type-C Switching

For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D.

Applications
SEL 1 0 Shunt Status ON OFF ON D+/D- Function No Connect (Power Down) AUDP/AUDN HDP/HDN

Pin Name HDP HDN GND AUDN SEL D+ EN AUDP VCC Pin High Speed Differential Data High Speed Differential Data Ground Audio Signal Function Select Audio/Data Common I/O Audio/Data Common I/O Chip Enable Audio Signal Power Supply Description

Rating VCC VIS Positive DC Supply Voltage Analog Input/Output Voltage HDP, HDN AUDP, AUDN D+, D- VIN TL TJ MSL ILU ESD Digital Control Pin Voltage on EN, SEL Storage Temperature Lead Temperature, 1 mm from Case for 10 seconds Junction Temperature Under Bias Moisture Sensitivity (Note 1) Latchup Current (Note 2) ESD Protection (Note 3) Human Body Model Charged Device Model Symbol Value -0.5 to VCC 260 150 Level V C Unit V

Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Moisture Sensitivity Level (MSL): 1 per IPC/JEDEC standard: J-STD-020A. 2. Latch up Current Maximum Rating: 100 mA per JEDEC standard: JESD78. 3. This device series contains ESD protection and passes the following tests: Human Body Model (HBM) 2.0 kV per JEDEC standard: JESD22-A114 for all pins.

Symbol VCC VIS Positive DC Supply Voltage Switch Input / Output Voltage (Note 4) HDP, HDN AUDP, AUDN D+, D- VIN TA Digital Control Input Voltage Operating Temperature Range Parameter Min GND -40 Max VCC V C Unit V

4. If the audio channel is not in use, it is recommended that no signals are applied on the audio inputs AUDN and AUDP.


 

Some Part number from the same manufacture ON Semiconductor
NL3S22SMUTAG ON Semiconductor NL3S22 USB 2.0 + Audio Switches are double-pole/double-throw (DPDT) analog switches for routing high speed differential data and audio. The high-speed data path and differential channels
NL3S22AHMUTAG
NL3S2223MUTBG New Technology
 
0-C     D-L     M-R     S-Z