Details, datasheet, quote on part number: DK-20648
PartDK-20648
CategoryEmbedded Solutions => Engineering Tools => Sensor Development Tools => Multiple Function Sensor Development Tools => 8844128
TitleMultiple Function Sensor Development Tools Development Kit for ICM-20648 6-Axis Motion Sensor
Description
CompanyInvensense
 
Specifications 
Product CategoryMultiple Function Sensor Development Tools
ManufacturerTDK
ProductDevelopment Kits
TypeAccelerometer, Gyroscope
Tool Is For Evaluation OfICM-20648
Operating Supply Voltage1.71 V to 3.45 V
BrandTDK InvenSense
Description/FunctionDevelopment platform for ICM-20648
Interface TypeI2C, SPI, USB
DK-20648 photo

 

Some Part number from the same manufacture Invensense
MPU-3300 InvenSense MPU-3300 triple-axis industrial gyroscopes are the worlds first single-chip, digital-output, 3-axis MEMS devices optimized for industrial applications. The devices feature three 16-bit analog-to-digital
ICS-40300

The ICS-40300 is a low-noise, high-SPL MEMS microphone with extended low-frequency response. The ICS-40300 consists of a MEMS microphone element and an impedance converter amplifier. The ICS-40300 low-frequency

ICS-40310

The ICS-40310 is a high-performance MEMS microphone with a combination of very-low power consumption, high SNR, and a tiny package. Running from a 1 V supply, the ICS-40310 consumes only 16 µA

ISZ-2510

The ISZ-2510 is a single-chip, digital-output, 1-axis MEMS gyro IC with programmable full-scale ranges of ±250, ±500, ±1000, and ±2000 degrees/sec (dps), which is useful

ITG-3400

The ITG-3400 is a single-chip, digital-output, three-axis MEMS gyro IC with programmable full-scale ranges of ±250, ±500, ±1000, and ±2000 degrees/sec (dps), which is useful

IXZ-2510

The IXZ-2510 is a single-chip, digital-output, 2-axis MEMS gyro IC with programmable full-scale ranges of ±250, ±500, ±1000, and ±2000 degrees/sec (dps), which is useful

ITG-3701

Today’s wearable sports applications require higher than the common ±2000 dps (degrees per second) FSR so that critical data is not lost at the point of impact. The ±4000 dps range

ICM-20608 Specifications: Family: Multifunction ; Series: - ; Sensor Type: Accelerometer, Gyroscope, 3 Axis ; Output Type: IC, SPI ; Online Catalog: ICM-20608
EV_ICS-43434-FX

InvenSense's ICS‐43434 is a digital I²S output bottom port microphone. The complete ICS‐43434 solution consists of a MEMS sensor, signal conditioning, an analog‐to‐digital converter, decimation

ICS-43434
ICS-52000
EV_ICM-20648

InvenSense's ICM-20948 9-axis motion-tracking device is ideal for applications looking for 9-axis sensor fusion. ICM-20948 comes with a digital motion processor that can be utilized to offload the 9-axis

ICM-20648
ICS-40720

InvenSense ICS-40720 enables high performance acoustic applications with a very high 70 dB SNR and ±2 dB sensitivity tolerance. This solution is ideal for any beamforming microphone array and voice

ICS-52000

Invensense's ICS-52000 is a bottom port microphone with a TDM digital output. This demo board contains 16 ICS-52000 microphones in a 4 x 4 array with 15 mm spacing. All microphones are synchronously

EV_ICS-52000-ARRAY
ICS-52000

TDK InvenSense ICS52000 is a low-noise digital TDM output bottom port microphone in a small 4mm  3mm  1mm surfacemount package. The device consists of a MEMS sensor, signal

ICM-20948

TDK InvenSense ICM-20948 9-axis MEMS MotionTracking device is a multi-chip module (MCM) consisting of two dies integrated into a small 3mm x 3mm x 1mm QFN package. One die houses a 3-axis gyroscope,

DK-20602
DK-20789

InvenSense's DK-20789 is a comprehensive development platform for ICM-20789, a high performance 7-axis motion sensor that combines a 3-axis gyroscope, a 3-axis accelerometer, and a pressure sensor.



DK-20948
 
0-C     D-L     M-R     S-Z