Details, datasheet, quote on part number: BQ25600DEVM-771
PartBQ25600DEVM-771
CategoryEmbedded Solutions => Engineering Tools => 8846143
TitlePower Management IC Development Tools BQ25600DEVM-771
DescriptionTexas Instruments bq25600EVM-771/bq25600DEVM-711 Evaluation Modules (EVMs) are complete charger modules for evaluating an I2C-controlled single cell battery charger using either the bq25600 or bq25600D device in a WCSP package. These evaluation modules do not include the USB-to-GPIO or EV2300/EV2400 interface board. To evaluate the evaluation module a USB-to-GPIO interface board must be ordered separately.
CompanyTexas Instruments Inc.
DatasheetDownload BQ25600DEVM-771 datasheet
Specifications 
ProductEvaluation Modules
TypeBattery Management
Tool Is For Evaluation OfBQ25600D
Input Voltage3.9 V to 14 V
Output Voltage4.208 V
BQ25600DEVM-771 photo

Others parts numbering
BQ25600EVM-771: Power Management IC Development Tools BQ25600EVM-771

 

Features, Applications

This user's guide provides detailed testing instructions for the bq25600 and bq25600D evaluation modules (EVM). Also included are descriptions of the necessary equipment, equipment setup, and procedures. The reference documentation contains the printed-circuit board layouts, schematics, and the bill of materials (BOM).

Contents Introduction................................................................................................................... 2 1.1 EVM Features....................................................................................................... 2 1.2 I/O Descriptions..................................................................................................... 2 Test Summary................................................................................................................ 4 2.1 Equipment........................................................................................................... 4 2.2 Equipment Setup.................................................................................................... 4 2.3 Test Procedure...................................................................................................... 6 PCB Layout Guideline....................................................................................................... 7 Board Layout, Schematic, and Bill of Materials.......................................................................... 7 4.1 Schematic............................................................................................................ 7 4.2 Bill of Materials.................................................................................................... 10 List of Figures

Original Test Setup for bq25600xEVM.................................................................................... Selection Window of bqStudio Evaluation Software.................................................................... Schematic for bq25600 EVM............................................................................................... Schematic for bq25600D EVM.............................................................................................

Device Data Sheets......................................................................................................... 2 PWR771 EVM Connections................................................................................................ 2 EVM Jumper Connections and Shunt Installation....................................................................... 3 Recommended Operating Conditions..................................................................................... 3 bq25600EVM-771 Bill of Materials....................................................................................... 10 bq25600DEVM-771 Bill of Materials..................................................................................... 14

For detailed features and operation, see Table 1 for a list of devices and their data sheets. Table 1. Device Data Sheets

The bq25600(D) evaluation module (EVM) is a complete charger module for evaluating an I2C-controlled single NVDC-1 charge using the bq25600(D) device. This EVM does not include the USB-to-GPIO or EV2300/EV2400 interface board. To evaluate the EVM, a USB-to-GPIO interface board must be ordered separately.

Table 2 lists the jumper connections available on this EVM. Table 2. PWR771 EVM Connections

Jack J6 J7 Description Input: positive terminal Input: negative terminal (ground terminal) PMID pin connection, power bank output Ground and power bank output negative terminal Output mini-USB port Connected to system Ground Connected to battery pack Connected to battery pack for voltage sensing Ground I2C 4-pin connector USB-TO-GPIO connector

Table 3 lists the EVM jumper connections. Table 3. EVM Jumper Connections and Shunt Installation

Jack S1 S2 Description D+ and PSEL pin selection CE pin setting: pull low to enable the charge SCL and OTG pin setting STAT, PG, CE, INT, OTG pins internal pullup source (VSYS or BAT) TS pin to GND TS resistor divider pullup source (REGN) connection Internal k to GND to TS pin BATSNS selection QON and VSET pin setting STAT pin setting SDA and PG pin setting D+ and PSEL J3 D- and J3 D- and PG pin setting Add 1-F (C100) VBUS capacitor Add 10-F (C101) PMID capacitor Add 10-F (C103) SYS capacitor Add 4.7-F (C104) BAT capacitor QON control Switch to short indicator LEDs bq25600 Setting Short PSEL to low Installed Not installed Short to VSYS Not installed Installed Short to BAT Not installed Installed Not installed Not installed Installed Not installed Not installed Not installed Not installed Default off Default off bq25600D Setting Not installed Installed Not installed Short to VSYS Not installed Installed Short to BAT Not installed Installed Not installed Installed Not installed Not installed Not installed Not installed Not installed Default off Default off

Table 4 lists the recommended operating conditions for this EVM. Table 4. Recommended Operating Conditions

Symbol Supply voltage, VVBUS Battery voltage, VBAT IBAT IBATOP Supply current, IIN Description Input voltage from AC adapter Voltage applied at VBAT terminal Fast charging current Discharging current through internal MOSFET Maximum input current from AC adapter input MIN TYP 5 4.208 MAX UNIT


 

Some Part number from the same manufacture Texas Instruments Inc.
BQ25600EVM-771 Texas Instruments bq25600EVM-771/bq25600DEVM-711 Evaluation Modules (EVMs) are complete charger modules for evaluating an I2C-controlled single cell battery charger using either the bq25600 or bq25600D
CSD95490Q5MC Texas Instruments Synchronous Buck NexFET? Smart Power Stage in an Industry Standard Footprint has a highly optimized design for operating in a high-power, high-density synchronous buck converter. In completing
CSD95492QVM
CSD95490Q5MCT
CSD95496QVM
CSD95495QVMT
CSD95492QVMT
CSD95496QVMT
CSD95482RWJT
CSD95491Q5MCT
CSD95481RWJT
CSD95491Q5MC
CSD95495QVM
CSD95481RWJ
CSD95482RWJ
DRV3220QPHPRQ1 Specifications: Product Category: Motor/Motion/Ignition Controllers & Drivers ; Manufacturer: Texas Instruments ; Product: Brushed DC Motor Drivers ; Type: Three-Phase Automotive Gate Driver ; Output Current:
LM76003EVM-500K
LM76002EVM-500K
LM76003RNPT
LM76002RNPT
LM76003RNPR
 
0-C     D-L     M-R     S-Z