Details, datasheet, quote on part number: EVALM1CM610N3TOBO1
PartEVALM1CM610N3TOBO1
Category
TitlePower Management IC Development Tools
DescriptionInfineon iMOTION? MADK Platforms are modular application design kits for evaluating compact and flexible 3-phase motor drives. The iMOTION MADK evaluation platform covers 115/230V motor drive applications up to 300W. Two control board options are available and a range of power boards for a modular and scalable system solution. One control board is based on a standard ARM® Cortex®-M0 Microcontroller XMC1302 with tailored motor control peripherals and MATH hardware accelerator. The other board is an iMOTION? IRMCK099 digital motion control IC with integrated Motor Control Engine (MCE).

CompanyInfineon Technologies Corporation
DatasheetDownload EVALM1CM610N3TOBO1 datasheet
  
EVALM1CM610N3TOBO1 photo

Others parts numbering
EVALM1099MCTOBO1: Power Management IC Development Tools Control Board for iMOTION Modular Application Design Kit (MADK). The Eval-M1-099M-C board requires MCETOOLV2.
EVALM113020565DTOBO1: Power Management IC Development Tools EvalM11302EvalM10565 USBcbl,3/5pole conn
EVALM113020584DTOBO1: Power Management IC Development Tools EvalM11302EvalM10584 USBcbl,3/5pole conn
EVALM113023684ATOBO1: Power Management IC Development Tools USB Cbl,Eval-M1-1302 and Eval-M1-36-84A
EVALM13684ATOBO1: Power Management IC Development Tools IRSM836-084A IPM mounted on board
EVALM113023645ATOBO1: Power Management IC Development Tools USB Cbl,Eval-M1-1302 and Eval-M1-36-45A
EVALM13645ATOBO1: Power Management IC Development Tools IRSM836-045A IPM mounted on board
EVALM10565DTOBO1: Power Management IC Development Tools IRSM505065DA2,3/5ple connector on board
EVALM10584DTOBO1: Power Management IC Development Tools IRSM505084DA2,3/5ple connector on board
MCETOOLV2: Programmers - Universal & Memory Based Isolated programmer, debugger and tuner for IRMCK099M, IRMCx100 and RMCx300 series iMOTION motor control Ics
EVALM11302TOBO1: Development Boards & Kits - ARM XMC1302 mount board

 

Features, Applications

iMOTION TM Modular Application Design Kit About this document

Scope and purpose This application note provides an overview of the evaluation board Eval-M1-CM610N3 including its main features, key data, pin assignments and mechanical dimensions. is a complete evaluation board including a 3-phase CIPOSTM Mini Intelligent Power Module (IPM) for motor drive application. In combination with control-boards equipped with the M1 20pin interface connector, like EVAL-M1-099M, it features and demonstrates Infineon's CIPOSTM Mini IPM technology for motor drive. The evaluation board Eval-M1-CM610N3 was developed to support customers during their first steps designing applications with CIPOSTM Mini IPM. CIPOSTM Mini IPM in this board is IKCM10H60GA which has 600V of voltage and 10A of current rating. It is optimized to high frequency switching application like washing machine, fan, etc. Intended audience This application note is intended for all technical specialists working with the Eval-M1-CM610N3 board.

About this document....................................................................................................................... 1 Table of Contents........................................................................................................................... Safety precautions......................................................................................................... 2 Introduction.................................................................................................................. 3 Main features................................................................................................................ 5 Pin assignments............................................................................................................ 8 Schematics and Layout..................................................................................................10 DC-Link Voltage Measurement.............................................................................................................10 EMI filter and soft power up circuit.......................................................................................................10 Inverter section using CIPOSTM mini IPM...............................................................................................11 Auxiliary power supply..........................................................................................................................12 Overcurrent protection circuit..............................................................................................................12 Thermistor Output................................................................................................................................13 Overtemperature Hardware Protection Circuit...................................................................................14 Power-on and power-off VDD under voltage test waveforms........................................................14 Overcurrent protection test waveform...........................................................................................15 Overtemperature protection test waveform..................................................................................16 PCB Layout............................................................................................................................................17 Bill of Materials Eval-M1-CM610N3..............................................................................21 Reference....................................................................................................................24

Application Note Please read the Important Notice and Warnings at the end of this document <Revision 1.0> <2017-05-22>

In addition to the precautions listed throughout this manual, please read and understand the following statements regarding hazards associated with development systems. Table 1 Precautions Attention: The ground potential of the Eval-M1-CM610N3 system is biased to a negative DC bus voltage potential. When measuring voltage waveform by oscilloscope, the scope's ground needs to be isolated. Failure do so may result in personal injury or death. Darkened display LEDs are not an indication that capacitors have discharged to safe voltage levels. Attention: Eval-M1-CM610N3 system contains DC bus capacitors which take time to discharge after removal of the main supply. Before working on the drive system, wait three minutes for capacitors to discharge to safe voltage levels. Failure do so may result in personal injury or death. Darkened display LEDs are not an indication that capacitors have discharged to safe voltage levels. Attention: Only personnel familiar with the drive and associated machinery should plan or implement the installation, start-up and subsequent maintenance of the system. Failure to comply may result in personal injury and/or equipment damage.

Attention: The surfaces of the drive may become hot, which may cause injury.

Attention: Eval-M1-CM610N3 system contains parts and assemblies sensitive to Electrostatic Discharge (ESD). Electrostatic control precautions are required when installing, testing, servicing or repairing this assembly. Component damage may result if ESD control procedures are not followed. If you are not familiar with electrostatic control procedures, refer to applicable ESD protection handbooks and guidelines. Attention: A drive, incorrectly applied or installed, can result in component damage or reduction in product lifetime. Wiring or application errors such as under sizing the motor, supplying an incorrect or inadequate AC supply or excessive ambient temperatures may result in system malfunction. Attention: Remove and lock out power from the drive before you disconnect or reconnect wires or perform service. Wait three minutes after removing power to discharge the bus capacitors. Do not attempt to service the drive until the bus capacitors have discharged to zero. Failure do so may result in personal injury or death. Attention: Eval-M1-CM610N3 system is shipped with packing materials that need to be removed prior to installation. Failure to remove all packing materials which are unnecessary for system installation may result in overheating or abnormal operating condition.

The Eval-M1-CM610N3 evaluation board is a part of the iMOTIONTM Modular Application Design Kit for drives (iMOTIONTM MADK). The MADK platform is intended to use various power stages with different control boards. These boards can easily be interfaced through the iMOTIONTM MADK-M1 20 pin interface connector. This evaluation board is designed to give Easy-to-use power stage based on the Infineon's CIPOSTM Mini Inteligent Power Module (IPM). The board is equipped with all assembly groups for sensorless field oriented control (FOC). It provides a single-phase AC-connector, rectifier and 3-phase output for connecting the motor. The power stage also contains emitter shunts for current sensing and a voltage divider for DC-link voltage measurement. The Eval-M1-CM610N3 evaluation board is available through regular Infineon distribution partners as well as on Infineon's website. The features of this board are described in the design feature chapter of this document, whereas the remaining paragraphs provide information to enable the customers to copy, modify and qualify the design for production according to their own specific requirements. Environmental conditions were considered in the design of the Eval-M1-CM610N3. The design was tested as described in this document but not qualified regarding safety requirements or manufacturing and operation over the whole operating temperature range or lifetime. The boards provided by Infineon are subject to functional testing only. Evaluation boards are not subject to the same procedures as regular products regarding Returned Material Analysis (RMA), Process Change Notification (PCN) and Product Discontinuation (PD). Evaluation boards are intended to be used under laboratory conditions and by trained specialists only. The block diagram of the Eval-M1-CM610N3 is depicted in Figure 1. This evaluation board includes an EMI filter and soft power up circuit, 20 pin iMOTIONTM MADK-M1 interface connector, auxiliary power supply to provide 15V and 3.3V, and the CIPOSTM Mini IPM IKCM10H60GA.

CIPOSTM Mini IPM in this board is IKCM10H60GA which has 600V of voltage and 10A of current rating. It is optimized to high frequency switching application like washing machine, fan, etc.


 

Some Part number from the same manufacture Infineon Technologies Corporation
EVALM1099MCTOBO1 Infineon iMOTION? MADK Platforms are modular application design kits for evaluating compact and flexible 3-phase motor drives. The iMOTION MADK evaluation platform covers 115/230V motor drive applications
EVALM113020565DTOBO1
EVALM113020584DTOBO1
EVALM113023684ATOBO1
EVALM13684ATOBO1
EVALM113023645ATOBO1
EVALM13645ATOBO1
EVALM10565DTOBO1
EVALM10584DTOBO1
MCETOOLV2
EVALM11302TOBO1
 
0-C     D-L     M-R     S-Z