Details, datasheet, quote on part number: DGQ2788AEN-T1-GE4
PartDGQ2788AEN-T1-GE4
CategorySemiconductors => Switch ICs => Analogue Switch ICs => 8846310
TitleAnalogue Switch ICs Dual DPDT/Quad SPDT 16-pin miniQFN
Description
CompanyVishay/Semiconductors
DatasheetDownload DGQ2788AEN-T1-GE4 datasheet
Specifications 
Product CategoryAnalogue Switch ICs
ManufacturerVishay
Number of Switches4 Switch
Configuration4 x SPDT
On Resistance - Max0.65 Ohms
Switch Voltage - Max5.5 V
On Time - Max150 us
Off Time - Max3 us
Maximum Operating Temperature+ 125 C
Mounting StyleSMD/SMT
Package/CaseQFN-16
PackagingCut Tape
BrandVishay Semiconductors
Minimum Operating Temperature- 40 C
Pd - Power Dissipation525 mW
SeriesDGQ2788A
Factory Pack Quantity3000
Supply Current - Max60 uA
Supply TypeSingle Supply
Supply Voltage - Max5.5 V
Supply Voltage - Min1.8 V
DGQ2788AEN-T1-GE4 photo

 

Features, Applications

, 338 MHz Bandwidth, Dual DPDT / Quad SPDT Analog Switch
DESCRIPTION

The is a four-channel single-pole double-throw (SPDT) analog switch with two control inputs. It is also known as a two-channel double-pole double-throw (DPDT) configuration. The part is designed to operate from 5.5 V single power rail. All switches conduct equally well in both directions, offering rail to rail signal witching and can be used both as multiplexers as well as de-multiplexers. The DGQ2788A offers low parasitic capacitance and highly matched low and flat switch resistance over the full signal range. It features break-before-make switching and low control logic threshold. The part supports rail to rail fast edge pulsing signals and have 0.1 ns/typ. propagation delay. It is ideal for both analog and digital signal switching in space constrain applications requiring high performance and efficient use of board space. The DGQ2788A comes in a small miniQFN-16 lead package x 0.55 mm. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

FEATURES

5.5 V single supply operation Low resistance: 0.37 /typ. 2.7 V Highly flat and matched RON Low parasitic capacitance, CON = 26 pF, COFF 14.5 pF High bandwidth: 338 MHz 0.1 ns/typ. propagation delay for rail to rail fast edge pulsing signal Guaranteed logic high 1.2 V, logic low 0.3 V Break before make switching Signal swing over V+ capable Power down protection Latch up current: mA (JESD78) ESD / HBM: kV AEC-Q100 qualified (Automotive product qualification in accordance with AEC-Q100 (Grade 1), specified from to +125 C) Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

Low and flat resistance High bandwidth Low parasitic capacitance Fault protection
APPLICATIONS

Automotive infotainment Audio, video, and bus routing Industrial automation Medical imaging Network and telecommunication

16 NC2 GND 3xx NO1 Pin 1 V+ Device marking: xx = date / lot traceability code Note: pin 1 has long lead

Document Number: 75683 1 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PACKAGE miniQFN-16 PART NUMBER DGQ2788AEN-T1-GE4 MIN. ORDER / PACK. QUANTITY Tape and reel, 3000 units

ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise noted)

PARAMETER Reference to GND Current (any terminal except NO, NC, or COM) Continuous current (NO, NC, or COM) Peak current (pulsed at 1 ms, 10 % duty cycle) Storage temperature (D suffix) Package solder reflow conditions d Power dissipation (packages) c V+ IN, COM, NC, NO a SYMBOL LIMIT -0.3 to (V+ mW mA UNIT V

Notes a. Signals on NC, NO, or COM, or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings b. All leads welded or soldered to PC board c. Derate 6.6 mW/C above C d. Manual soldering with iron is not recommended for leadless components. The is a leadless package. The end of the lead terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper lip cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection

Document Number: 75683 2 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PARAMETER Analog Switch Analog signal range d On-resistance RON flatness d RON match d VNO, VNC, VCOM RON flatness RON INO(off), INC(off) ICOM(off) Channel-on leakage current Digital Control Input high voltage Input low voltage Input capacitance Input current Dynamic Characteristics Turn-on time Turn-off time Break-before-make time Charge injection -3 dB bandwidth Off-isolation d Crosstalk d, f NO, NC off capacitance d Channel-on capacitance Power Supply Power supply range Power supply current V+ I+ VIN or V+ Full V A

Full 2.7 V, VCOM 2.7 V, INO, INC 100 mA Room Full 2.7 V, VCOM 0 to V+, INO, INC 100 mA Room 5.5 V, VNO, VNC 4 V, VCOM 0.5 V Full Room Full 5.5 V, VNO, VNC = VCOM = 0.5 Room Full VIN or V+ Full Room VNO or VNC 35 pF Full Room Full = 1 nF, VGEN 1.5 V, RGEN = 5 pF, = 100 kHz = 5 pF, = 1 MHz = 5 pF, = 100 kHz = 5 pF, = 1 MHz Room = 1 MHz Room

tON tOFF td QINJ BW OIRR XTALK CNO(off) CNC(off) CNO(on) CNC(on)

Notes a. Room = 25 C, full = as determined by the operating suffix b. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet c. Typical values are for design aid only, not guaranteed nor subject to production testing d. Guarantee by design, not subjected to production test e. VIN = input voltage to perform proper function f. Crosstalk measured between channels

Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

Document Number: 75683 3 For technical questions, contact: analogswitchtechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


 

Some Part number from the same manufacture Vishay/Semiconductors
4GBL005 Specifications: Diode Type: Single Phase ; Package / Case: 4-SIP, GBL ; Packaging: Bulk ; Reverse Recovery Time (trr): - ; Speed: Standard Recovery > 500ns,> 200mA (Io) ; Current - DC Forward (If): 4A ; Voltage
4GBL01
4GBL02
4GBL04
4GBL06
4GBL08
4GBU005 Specifications: Diode Type: Single Phase ; Package / Case: 4-SIP, GBU ; Packaging: Bulk ; Reverse Recovery Time (trr): - ; Speed: Standard Recovery > 500ns,> 200mA (Io) ; Current - DC Forward (If): 4A ; Voltage
4GBU01
4GBU02
4GBU04
4GBU06
4GBU08
6GBU005
6GBU01
6GBU02
6GBU04
6GBU06
6GBU08
8GBU005
8GBU01
8GBU02
 
0-C     D-L     M-R     S-Z