Details, datasheet, quote on part number: FH63-30S-0.5SH
PartFH63-30S-0.5SH
CategoryConnectors => FFC / FPC => 8848575
TitleFFC & FPC Connectors
DescriptionHirose Electric FH62/FH63 Series One Action Lock FPC Connectors simplify the assembly process to improve work efficiency and reduce quality risks such as actuator breakoff and foreign matter adhesion. The FH62 Series Connectors are designed for consumer and portable equipment while the FH63 Series Connectors are designed for high reliability applications due to superior heat resistance and robustness.
CompanyHirose Connector
DatasheetDownload FH63-30S-0.5SH datasheet
Specifications 
Product
Number of Positions
Pitch
Termination Style
Mounting Angle
Contact Location
Contact Plating
Current Rating
SeriesFH63
Packaging
FH63-30S-0.5SH photo

Others parts numbering
FH63-40S-0.5SH: FFC & FPC Connectors 40P 0.5MM SMT HZT
FH62-35S-0.25SHW(10): FFC & FPC Connectors 35P TOP CONTCT SINGL ACTION LOCK SMT HRZ
FH62-35S-0.25SHW(99)
FH63-30S-0.5SH(99): FFC & FPC Connectors 30P 0.5MM SMT HZT
FH63-40S-0.5SH(99): FFC & FPC Connectors 40P 0.5MM SMT HZT

 

Features, Applications
0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector
Jan.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
Insert FPC/FFC without opening the lock lever before insertion!
Features

Single action locking by simply inserting FPC after mounting contributes to enhanced workability. (Fig.1) (Lock release by operating the lock lever when removing.) Operation of the lock lever is not required at the time of mating FPC. Can be inserted with one hand. Contributes to reduced assembly time. The lock lever will not be damaged by operation. Mating failure is reduced by eliminating the need to operate a lever while mating.

2. Two-points of contact prevents contact failure by dust

High contact reliability by independent spring two-point contact design, preventing contact failure by dust. (Fig.2)

FH63 allows you to choose from FPC/FFC/Shield FFC. Shielded FFC is acceptable for EMI prevention. (Fig.3)

The circuit is automatically locked after FPC/FFC is inserted by a single action. The notches on both sides of FPC are held by the lock lever, generating a high FPC retention force in spite of the small contact. (Fig.4)

5. Visual inspection on the mated status of FPC/FFC is possible.

As the notches on both sides of FPC can be checked from the top surface after inserting FPC/FFC, insufficient insertion during assembly is prevented. (Fig.5)

Halogen free *AS defined by IEC : 900ppm max, : 900ppm max, Br+Cl : 1,500ppm max
Shield FFC GND contact and FFC GND plate contact at multiple points. Fig.3
FPC/FFC can be checked from the top surface after mating.

FH63 Series0.5mm Pitch, 2.8mm high, Single Action Lock at bottom contact point, FPC/FFC/Shield FFC connector

Rating Rated current 0.5A Rated voltage 50V AC/DC rms Operating temperature range to +105C (Note 1) Operating humidity range : Relative humidity 90% max. (No condensation) Storage temperature range to +60C (Note 2) Storage humidity range : Relative humidity 90% max. (No condensation)

Thickness 0.03mm Signal layout : Gold plated, GND plate : Tin plated
1. Insulation resistance 2. Withstanding voltage 3. Contact resistance 500M min.
Specification

DC No flashover or insulation breakdown 100m max. * Including FPC/FFC conductor resistance Contact resistance : 100m max. No damage, cracks, or parts dislocation No electrical discontinuity 1s or more Contact resistance : 100m max. No damage, cracks, or parts dislocation No electrical discontinuity 1s or more Contact resistance : 100m max. No damage, cracks, or parts dislocation Contact resistance : 100m max. Insulation resistance : 50M min. No damage, cracks, or parts dislocation Contact resistance : 100m max. Insulation resistance : 50M min. No damage, cracks, or parts dislocation No deformation of components affecting performance

Frequency to 55Hz, single amplitude 0.75mm, 10 cycles in each of the 3 directions
Acceleration of 981m/s2, duration of 6 ms, sine half-wave waveform, 3 cycles in each of the 3 axes

Note 1 : Includes temperature rise caused by current flow. Note 2 : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity Range covers non-conducting condition of installed connectors in storage, shipment or during transportation.

Part Insulator Signal contact Grounding contact Reinforcing metal tabs Materials LCP Copper alloy Copper alloy SUS Finish Grey Black Nickel barrier gold plated Pure tin reflow plated Pure tin reflow plated UL standard UL94V-0

Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders.

Series name : FH Series No. : 63 No. of contacts : 30 Contact pitch : 0.5mm Terminal type SH SMT horizontal mounting type Specification Blank : Standard : 500pcs/reel

B0.15 C Signal contact No.1 Cavity No. (Pickup area) HRS mark Polarity mark Grounding contact 0.50.1 0.25

Reinforcing metal tabs Signal contact 3.90.2 0.350.1 (Signal contact lead) 4.250.2 0.550.1 (Lead of reinforcing metal tabs)

Note 1 : The dimension in parentheses are for reference. 2 : Lead co-planarity including reinforced chucking metals shall be 0.1 max. To be delivered with tape and reel packages. See the packaging specifications for details. 4 : Note that preventive hole for sink mark or slit could be added for improvement. 5 : The quality remains good, even with the dark spots, which could occasionally occur on molded plastic. 6 : This product satisfies halogen free requirements defined as 900ppm maximum chlorine, 900ppm maximum bromine, and 1500ppm maximum total of chlorine and bromine.

HRS No. Under planning (Note 1) Under planning (Note 580-4400-0 580-4403-0 Under planning (Note 1) Under planning (Note 1)

Note 1 : Contact positions without HRS No. are currently under planning. Please contact hirose for detailed information about product variation.


 

Some Part number from the same manufacture Hirose Connector
FH63-40S-0.5SH Hirose Electric FH62/FH63 Series One Action Lock FPC Connectors simplify the assembly process to improve work efficiency and reduce quality risks such as actuator breakoff and foreign matter adhesion.
FH62-35S-0.25SHW(10)
FH62-35S-0.25SHW(99)
FH63-30S-0.5SH(99)
FH63-40S-0.5SH(99)
 
0-C     D-L     M-R     S-Z