Details, datasheet, quote on part number: ATS-CP-1002
PartATS-CP-1002
Category
TitleMINI CHANNEL COLD PLATE
Description

For cooling IGBT modules and high-powered semiconductors, air cooling is often inadequate and liquid cooling is required. Cold plates are a way to implement localized cooling of power electronics by transferring heat from the device to a liquid that flows to a remote heat exchanger and dissipates into either the ambient or to another liquid in a secondary cooling system. Advanced Thermal Solutions, Inc. (ATS) liquid cold plates are the right choice for cooling high-powered electronics, IGBT modules, lasers, wind turbines, motor devices, automotive components, medical equipment, and any application where liquid cooling is needed.



CompanyAdvanced Semiconductor, Inc.
DatasheetDownload ATS-CP-1002 datasheet
  
ATS-CP-1002 photo

Others parts numbering
ATS-CP-1003
ATS-CP-1004
ATS-CP-1000
ATS-CP-1001

 

Features, Applications

ATS IGBT cold plates have unmatched thermal performance because of their mini-channel fin design. The ATS-CP-1002 cold plate, at a flow rate of 4 L/min, can transfer 1kW of heat at 7.0C temperature difference between the cold plate base and inlet fluid temperature. If the coolant has particles, a #60 filter or finer is recommended to remove possible particles in the liquid.

Superior heat transfer, flexible design platform
FEATURES AND BENEFITS More than 30% improvement in thermal performance compared
Designed to fit standard IGBT and other power electronics applications

Compatible with industry accepted coolants 1/4 NPT threaded input and output Low pressure drop Lightweight for ease of transportation Provides uniform cold plate surface temperature

Industry standard threaded hole sizes allows for hassel-free connection options
Leak tested at 100 psi Applications: Automotive Industry, Uninterruptible Power

Supplies, Wind Turbines, Photovoltaic Inverters, Power Electronics, Induction Heaters, Motor Devices, Utility Vehicles, Anywhere power devices are used

Choose from various options, i.e; fitting types, material types, device mounting and more. Contact ATS for additional information

ADDITIONAL COMPONENTS DEPLOYED IN LIQUID COOLING LOOPS
ATS will customize any of the cold plates to fit Flow Meter Leak Detector into your application
IGBT COMPATIBILITY S emikron SSKIM 63 O ther IGBTs or high power

devices ATS has the products needed to design a complete liquid cooling loop: Cold Plates to transfer and remove the heat from the source, Heat Exchangers to transfer heat from the liquid to the air with or without a fan, and Chillers to circulate and condition the fluid in the system. In addition, ATS offers Flow Meters to instantaneously measure the volumetric flow rate of the fluid in the system and Leak Detectors to notify users of any leaks in the system.

Part Number ATS-CP-1003 ATS-CP-1004 Dimensions* x 20 Flow Rate (L/min) 4 L/min 4 L/min 4 L/min 4 L/min 4 L/min 6.80C 5.90C

For further technical information, please contact Advanced Thermal Solutions, Inc. by phone: 1-781-769-2800, email ats-hq@qats.com or visit www.qats.com.

This confidential document is the sole property of Advanced Thermal Solutions (ATS). It is prohibited to reproduce or distribute this information, in whole or part,

NOTES: 1. DIMENSIONS ARE IN MM. 2. TOLERANCES: X.XX 0.25 MM, X.XXX 0.125 MM. 3. THIRD ANGLE PROJECTION.


 

Some Part number from the same manufacture Advanced Semiconductor, Inc.
ATS-CP-1003

For cooling IGBT modules and high-powered semiconductors, air cooling is often inadequate and liquid cooling is required. Cold plates are a way to implement localized cooling of power electronics by transferring

ATS-CP-1004
ATS-CP-1000
ATS-CP-1001
 
0-C     D-L     M-R     S-Z