Details, datasheet, quote on part number: SP3422-04UTG
DatasheetDownload SP3422-04UTG datasheet
SP3422-04UTG photo


Features, Applications


The SP3422 integrates 4 channels of ultra low capacitance rail-to-rail diodes and an additional zener diode to provide protection for electronic equipment that may experience destructive electrostatic discharges (ESD). This robust component can safely absorb repetitive ESD strikes above the maximum level specified in the IEC 61000-4-2 international standard (±8kV contact discharge) without performance degradation. The extremely low loading capacitance also makes it ideal for protecting high speed signal pins such as V-by-One®, USB3.0, USB2.0, and IEEE 1394.

Features ESD, IEC +22/ -10kV contact, +22/-10kV air EFT, IEC 40A (tP=5/50ns) Lightning, IEC 61000-4-5 2nd edition, 2A (tP=8/20s) Low capacitance of 0.2pF (TYP) at 3GHz Low leakage current of 20nA (TYP) at 5V Halogen free, Lead free and RoHS compliant Moisture Sensitivity Level(MSL -1)

Applications V-by-One® Embedded DisplayPort USB 2.0/3.0 Ports MIPI Camera and Display Serial bus interfaces such as IEEE 1394 Flat Panel Displays LCD/LED TVs Smartphones Mobile Computing

Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. ©2017 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 08/04/17

Symbol IPP TOP TSTOR Parameter Peak Current (tp=8/20s) Operating Temperature Storage Temperature Value to 150 Units A °C

CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied.

Parameter Reverse Standoff Voltage Reverse Leakage Current Clamp Voltage1 Dynamic Resistance2 ESD Withstand Voltage1 Diode Capacitance


Note: 1 Parameter is guaranteed by design and/or component characterization. Transmission Line Pulse (TLP) with 100ns width, 2ns rise time, and average window t2= 90ns

Positive Transmission Line Pulsing (TLP) Plot
Negative Transmission Line Pulsing (TLP) Plot
©2017 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 08/04/17

Reflow Condition - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) - Time (min to max) (ts) Average ramp up rate (Liquidus) Temp (TL) to peak TS(max) TL - Ramp-up Rate Reflow - Temperature (TL) (Liquidus) - Temperature (tL) Pb ­ Free assembly

Peak Temperature (TP) Time within 5°C of actual peak Temperature (tp) Ramp-down Rate Time 25°C to peak Temperature (TP) Do not exceed

TVS Diode Arrays (SPA® Diodes) Series Number of Channels G= Green T= Tape & Reel Package
Part Number SP3422-04UTG Package DFN-5 Marking B* Min. Order Qty. 3000


Some Part number from the same manufacture Littelfuse
0-C     D-L     M-R     S-Z