|Title||TAPE ELECTROPLATING 1/2"|
For tape applications requiring resistance to most chemicals used in electroplating and anodizing processes, use 3M's electroplating tape 470. This tan, conformable tape features an abrasion resistant backing ideal for use with plating chemicals, anodizing chemicals, milling, etching, and peening operations.
|Datasheet||Download 1/2-5-470 datasheet
|Others parts numbering|
|1-5-470: TAPE ELECTROPLATING 1"|
|2-5-470: TAPE ELECTROPLATING 2"|
|3/4-5-470: TAPE ELECTROPLATING 3/4"|
|3-5-470: TAPE ELECTROPLATING 3"|
3MTM Electroplating Tape is a conformable and abrasion-resistant vinyl tape with excellent resistance to most chemicals used in typical electroplating processes. 3MTM Electroplating Tape is a linered version of 3M vinyl tape 470 that may be used for die-cutting or large area applications.Backing Pigmented vinyl Adhesive Rubber Liner Tape 470 - none Tape 470L - white paper Color Tan
Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes.
ASTM Test Method Adhesion to Steel: Tensile Strength at Break: Elongation at Break: Backing Thickness: Total Tape Thickness (without liner): Liner Thickness: Temperature Use Range: 37 oz./in. width (40.4 N/100 mm) 20 lbs./in. width (350 N/100 mm) 180% 6.3 mils (0.16 mm) 7.1 mils (0.18 mm) 6.1 mils (0.15 mm) D-3759 D-3652Features
Excellent resistance to most chemicals used in typical electroplating operations. Prolonged exposure to elevated temperatures (above 250°F/121°C) and hot caustics may cause weakening of the adhesive bond. Can be qualified to meet Federal Specification HH-T-0025 (GSA-FSS) Ammendment 2. Resists most common solvents, care should be taken to avoid ketones, chlorinated hydrocarbons, and esters, found in lacquer thinners, degreasers, paint strippers, etc., which may cause the backing to swell or curl. Vinyl backing is conformable Backing accepts marker ink and is printable in using the thermal transfer process.
Application Ideas Masking during many electroplating operations, including both flat strip and overlapping masks. Wrapping, patching, coated racks and masking many irregular surfaces. Labeling. Sealing containers from water intrusion.Store under normal conditions to 27°C) and to 60% R.H. in the original carton.
To obtain best performance, use this product within 18 months from date of manufacture.
The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed.
Many factors beyond 3M's control and uniquely within user's knowledge and control can affect the use and performance a 3M product in a particular application. Given the variety of factors that can affect the use and performance a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user's method of application.
Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M's option, replacement of the 3M product or refund of the purchase price.
Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001: 2008 standards.
Industrial Adhesives and Tapes Division 3M Center, Building 225-3S-06 St. Paul, 800-362-3550 877-369-2923 (Fax) www.3M.com/industrial
|Some Part number from the same manufacture 3M|
For tape applications requiring resistance to most chemicals used in electroplating and anodizing processes, use 3M's electroplating tape 470. This tan, conformable tape features an abrasion resistant