|
Details, datasheet, quote on part number:06LTM0075A
| |
Datasheet text preview:
MODELS LT/MLT ·
TECHNICAL SPECIFICATIONS
MODELS
LINEAR POSITION TRANSDUCER
LT
MLT
DIPTEONS** S O M I NSION
MECHANICAL
Total Mechanical Travel Starting Force Shock Vibration Life 1.05 to 10.05 in. (min) 26.7 to 255.3 mm (min) .55 to 6.05 in. (min) 13.9 to 153.7 mm (min)
1.0 oz (max) 50 g 11 ms half sine 20 g rms 5 Hz to 2 KHz (MLT only) One billion dither operations
· Other resistance values · Independent Linearity to ± .1% Travels > 1 inch* · Water resistant seal*** · Three pin connector for MLT
DIMENSIONS
.50 Dia. (12.7) Housing length (Electrical travel + 1.50 in.) 1.00 (Retracted) (25.4) .125 Dia. (3.1)
ELECTRICAL
Theoretical Electrical Travel (in 1" increments) Independent Linearity Total Resistance Resistance Tolerance Operating Temperature Resolution Insulation Resistance Dielectric Strength Power Rating Recommended Wiper Current 0.25 Watt/in. electrical travel <1µA
.375 Dia. (9.53) 3 - Conductor cable #26 AWG (65/44) 12" (305) long min. (Color coded per schematic) xx.xx = inches (xx.xx) = mm (Black) Ground .187 Dia. (4.76) .50 (12.7) .75 Retracted (19.05) (Red) V-in Shaft Extended
1 to 10 in. (25.4 to 254.0mm) ±1.0% 1000 /in. electrical trave ±20%
1/2 to 6 in. (12.7 to 152.4mm)
#4-40 UNC-2A Thd x .50 in. long #28 jacketed cable 6" long, min. (Color coded per schematic) xx.xx = inches (xx.xx) = mm
1500 /in. electrical travel
(Black) Ground
(Red) V-in Shaft Extended
-40° to 80°C (-40° to 176°F) Infinite 1000 M @ 500 Vdc 500 M @ 500 Vdc 1000 V rms 0.20 Watt/in. electrical travel
(Brown) V-out Connect to high impedance circuit
SCHEMATIC DIAGRAM
Housing length [Electrical travel +1.2" (30.48)]
.063 (1.6) .125 Dia. (3.1)
#4-40 UNF-2B
(Orange) V-out Connect to high impedance circuit
SCHEMATIC DIAGRAM
.17 (4.3) .125 (3.17) .25 (6.35) Wiper M6 x 3 Thread #4-40 UNF-2B .625 (15.87) .37 (9.4)
Extended (Red)
Retracted (Black)
Optional MLT connector
Metric Shaft Adapter
.32 (8.0) .75 (19.0)
*5-95% of Theoretical Electrical Travel **Minimum quantities may be required. ***LT only, 12 oz. (340 g) max. starting force NOTE: Do not test using an Ohmeter on Rx 1 scale or other current devices. Excessive wiper current can cause output error or damage. Zero side load is recommended to achieve maximum life.
MLT Mating Connector
s
1-800-333-DATA
23
|
|
