Details, datasheet, quote on part number: 48IMS6-05-9
Part48IMS6-05-9
Category
DescriptionDC/DC Converter 6w 5v
CompanyN.A.
DatasheetDownload 48IMS6-05-9 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Input to output electric strength test kV DC Input voltage ranges: 18...36 and V DC Single and dual outputs 15 V DC Wide input voltage ranges Electrical isolation, single and dual outputs Immunity to IEC/EN and -6 High efficiency (typ. 82%) Flex power: flexible load distribution No load and short-circuit proof High reliability and no derating Operating ambient temperature ­40...+ 71 oC Industrial, alternative and SMD pinout DIL 24 case with 9.0 mm profile Safety approvals pending to IEC/EN UL 1950 LGA

The IMS 6 series of board mountable 6 W DC-DC converters has been designed according to the latest industry requirements and standards. The converters are particularly suitable for use in mobile or stationary applications in transport, industry or telecommunications where variable input voltages or high transient voltages are prevalent. Covering a total input voltage range from 75 V DC. The converters are designed and built according to the international safety standards IEC/EN UL 1950, CAN/CSA C22.2 No.950-95 and are LGA and UL marked. A special feature is their small case size, DIL 24 with only 9.0 mm profile. The circuit comprises integrated planar magnetics and all components are automatically assembled and solidly soldered onto a single PCB without any wire connections. Thanks to the rigid mechanical design the units withstand an extremely high level of shock and vibrations. Careful considerations of possible thermal stresses ensure the absence of hot spots providing long life in environments where temperature cycles are a reality. The thermal design allows operation at full load to an ambient temperature C in free air without using any potting material. Options : SMD pinout or K-pinout, an alternative to the standard industrial pinout, provide a high level of application specific engineering and design-in flexibility.

Page Electromagnetic Compatibility (EMC).............................. 8 Mechanical Data.............................................................. 9 Immunity to Environmental Conditions........................... 10 Safety and Installation Instructions................................ 11 Description of Options.................................................... 13

Summary.......................................................................... 1 Type Survey and Key Data.............................................. 2 Type Key.......................................................................... 2 Functional Description...................................................... 3 Electrical Input Data......................................................... 4 Electrical Output Data...................................................... 6 1/13

Options
Flexible load distribution on double outputs possible , 25% asymetric loading.

48 IMS K M Input voltage range 16...36 V DC............................................. 36...75 V DC........................................... 48 Series........................................................................ IMS 6 Output voltage type for output Output voltage type for output Operating ambient temperature range TA ­40...71 C.................................................. -9 Options:

For delivery lead times contact factory. Some types require a minimum order quantity.

The IMS 6 DC-DC modules are feedback controlled flyback converters using current mode PWM (Pulse Width Modulation). The converter input is protected against transients by means of a suppressor diode. The output voltage is monitored by a separate transformer winding close to the secondary windings and fed back to the control circuit.

Current limitation is provided by the primary circuit, thus limiting the total output current (Io nom for the single and Io1 nom + Io2 nom for the dual output types). The close magnetic coupling provided by the planar construction ensures very good regulation and allows for flexible load distribution on dual output types.

Fig. 1 Block diagram for single output types. Standard industrial pinout.
Fig. 2 Block diagram for dual output types. Standard industrial pinout.
Fig. 3 Block diagram for single output types. Special pinout (Option K).
Fig. 4 Block diagram for dual output types. Special pinout (Option K).
Fig. 5 Block diagram for single output types. SMD pinout (Option M).
Fig. 6 Block diagram for dual output types. SMD pinout (Option M).

 

Related products with the same datasheet
48IMS6-0505-9
48IMS6-12-9
Some Part number from the same manufacture
48IMS6-0505-9 DC/DC Converter 6w 5v
48Q1001-2R DC/DC Converter 5.1v 16a
4910A
4910B
4N29300 Optocoupler Photodarlington
4N35/D
5-1393090-0 Relay 2pole 24vdc
5-1393211-3 Relay Panel Dpco 12vdc
5-1393234-0 Relay Dpco 12vdc
5-1419111-0 Relay Plug in 115vac
5-1437007-1 Transition Connector Idc 26 Way
5/V280H.063447 Battery PCB Mount 6.0v
50A-10250 Delay Line-10 Tap 25ns
50B5814 Transistor MOSFET To-220
50N1386 Photo Tachometer
50N1387 LCR Meter
50N1388 Digital Sound Level Meter
52F2278 Ic-sm Voltage Regulator 3.3v
52F7508 Ac/dc Current Clamp Adap
52F7996 Analogue Multimeter
52F7997 Analogue Multimeter Deluxe
Same catergory

2SK2401 : VDDS = 200 ;; Id = 15 ;; Package Type = TO-220FL/SM.

74VHCT14AT : . HIGH SPEED: tPD 4 ns (TYP.) at VCC = 5V LOW POWER DISSIPATION: ICC 2 µA (MAX.) 25 oC POWER DOWN PROTECTION ON INPUTS & OUTPUTS SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = IOL 8 mA (MIN) BALANCED PROPAGATION DELAYS: tPLH tPHL OPERATING VOLTAGE RANGE: VCC (OPR) to 5.5V PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 14 IMPROVED LATCH-UP IMMUNITY LOW NOISE: VOLP.

AM41DL32X8G : . July 2003 The following document specifies Spansion memory products that are now offered by both Advanced Micro Devices and Fujitsu. Although the document is marked with the name of the company that originally developed the , these products will be offered to customers of both AMD and Fujitsu. There is no change to this datasheet as a result of offering.

FY4ADJ-03A : Type = Trench Gate Dual ;; Voltage = -30V ;; Rdson = 180 ;; Package = Obsolete ;; Drive Voltage = 4.

L918 : Line Filament Lamps. Line No. Part No. L9013 L9014 Volts Amps Watts Life Hours Vacuum Or Gas Filament Type S-8 Filament Length, L MOL Drawing Line No. Part No. L914 L918 Volts Amps Color Temp. Degrees Kelvin Life Hours Vacuum Or Gas Filament Type S-8 Filament Length,L1 F Dimensions MOL D Drawing .

MR27V1602E : 16-Meg OTP ROMs. 1 Meg X 16 or 2 Meg X 8 One Time Prom. The a 16 Mbit electrically One Time Programmable Read-Only Memory that can be electrically switched between × 16-bit and 8-bit by the state of the BYTE pin. The MR27V1602E supports high speed asynchronous read operation using a single 3.3V power supply. × 8-bit electrically switchable configuration +3.3 V power supply Access time 90 nS MAX Operating.

R1114Q151A : LOW Noise 150ma LDO Regulator. The R1114x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, low supply current, low ON-resistance, and high ripple rejection. Each of these ICs consists of a voltage reference unit, an error amplifier, resistor-net for voltage setting, a current limit circuit, and a chip enable circuit. These ICs perform with low dropout.

SI533DB00100DG : DUAL Frequency Crystal Oscillator (XO) (10 MHZ TO 1.4 GHZ). Available with any-rate output frequencies from 10 MHz to 945 MHz and select frequencies to 1.4 GHz 2 selectable output frequencies 3rd generation DSPLL® with superior jitter performance 3x better frequency stability than SAW-based oscillators Pin 1 output enable (OE) Internal fixed crystal frequency ensures high reliability and low aging Available.

2867322 : Miscellaneous Undefined Category; ANALOG/DIGITAL MOD DIN RAIL. s: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

C0805T220J5GALTU : 22pF Ceramic Capacitor 0805 (2012 Metric) 50V; CAP CER 22PF 50V 5% NP0 0805. s: Capacitance: 22pF ; Voltage - Rated: 50V ; Tolerance: ±5% ; Package / Case: 0805 (2012 Metric) ; Temperature Coefficient: C0G, NP0 ; Packaging: Tape & Reel (TR) ; : - ; Lead Spacing: - ; Operating Temperature: -55°C ~ 125°C ; Mounting Type: Surface Mount, MLCC ; Lead.

MBR20035CT : Schottky (Diodes & Rectifiers) 35V 200A Schottky Recovery. s: Manufacturer: GeneSiC Semiconductor ; RoHS:  Details ; Product: Schottky Diodes ; Peak Reverse Voltage: 35 V ; Forward Continuous Current: 200 A ; Max Surge Current: 1500 A ; Forward Voltage Drop: 0.75 V ; Maximum Reverse Leakage Current: 1 uA ; Operating Temperature Range: - 40 C to + 175 C ; Mounting.

6-146499-5 : Tin Through Hole Board To Board - Board Spacers, Stacker Connectors, Interconnect Through Hole; CONN HEADR 30POS .100" DUAL ROW. s: Color: Black ; Length - Post (Mating): 0.120" (3.05mm) ; Length - Stack Height: 0.900" (22.86mm) ; Length - Tail: 0.110" (2.79mm) ; Length - Overall: 1.130" (28.70mm) ; Mounting Type: Through Hole ; Number of Positions:.

CRB1A2E394JT : Resistor 390K Ohm 62.5mW 2 Resistors[number of pins] Pin Networks, Arrays; RES ARRAY 390K OHM 2 RES 0606. s: Resistance (Ohms): 390K ; Tolerance: ±5% ; Power Per Element: 62.5mW ; Circuit Type: Isolated ; Number of Pins: 4 ; Packaging: Tape & Reel (TR) ; Number of Resistors: 2 ; Package / Case: 0606 (1616 Metric), Concave ; Mounting Type: Surface.

QL300W : RESISTOR, WIRE WOUND, 300 W, 5 %, 8 ohm - 150000 ohm, CHASSIS MOUNT. s: Category / Application: General Use ; Technology / Construction: Wirewound ; Mounting / Packaging: Bolt-on Chassis, Radial Leads, RADIAL LEADED.

SDE1006A-181K : Fixed Inductors 180uH 10% SMD 1006. s: Manufacturer: Bourns ; Product Category: Fixed Inductors ; Brand: Bourns ; Inductance: 180 uH ; Tolerance: 10 % ; Maximum DC Current: 1.1 A ; Maximum DC Resistance: 630 mOhms ; Operating Temperature Range: - 40 C to + 125 C ; Self Resonant Frequency: 6.1 MHz ; Shielding: Unshielded ; Termination Style: SMD/SMT.

 
0-C     D-L     M-R     S-Z