Details, datasheet, quote on part number: 48Q1001-2R
Part48Q1001-2R
Category
DescriptionDC/DC Converter 5.1v 16a
CompanyN.A.
DatasheetDownload 48Q1001-2R datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Input to output isolation Single output: Series 24Q...48Q1000 Double output: Series 24Q...48Q2000 Very high efficiency to 86% Flexible output power Excellent surge and transient protection Input to output electric strength test 2800 V DC Redundant operation (n+1), current sharing Extremely low inrush current, hot plug-in Externally adjustable output voltage and inhibit Very compact and fully functional unit (20 mm wide) Telecoms compatible input voltage range of 48Q units according to prETS (38...75 V DC) Safety in accordance to IEC/EN EN 41003 LGA

These extremely compact DC-DC converters incorporate all necessary input and output filtering, signalling and protection features which are required in the majority of industrial applications. The converters provide important advantages such as flexible output power through primary current limitation, very high efficiency, excellent reliability, very low ripple and RFI noise levels, full input to output isolation, negligible inrush current and input over-/undervoltage lockout. The outputs are continuously open-/short-circuit proof. An isolated output power good signal and an output OK LED at the front panel indicate the operation status. Full system flexibility and n+1 redundant operating mode are possible due to virtually unrestricted series or parallel connection capabilities of all outputs. In parallel connection of several units, automatic current sharing is provided by a single wire interconnection. As a modular power supply module or as part of a distributed power supply system, the low profile design significantly reduces the necessary power supply volume without sacrificing high reliability. The fully enclosed, black coated aluminium case acts as heat sink and RFI shield. The 19" cassette occupies 3U/4TE only, but can also be chassismounted by means of four M 3 screws.

Page Electromagnetic Compatibility (EMC)............................ 14 Immunity to Environmental Conditions........................... 15 Mechanical Data............................................................ 16 Safety and Installation Instructions................................ 17 Description of Option...................................................... 19 Accessories.................................................................... 19

Summary.......................................................................... 1 Type Survey and Key Data.............................................. 2 Type Key and Product Marking........................................ 3 Functional Description...................................................... 4 Electrical Input Data......................................................... 5 Electrical Output Data...................................................... 6 Auxilary Functions.......................................................... 10

Input Voltage Range and Efficiency 2 Ui min...Ui max hmin Ui min...Ui max 48Q2540-2R 48Q2660-2R

The cumulated power of both outputs may not exceed the total power for the specified ambient temperature. Efficiency at Ui nom, Io nom and = 25 °C. Output 1 and 2, in parallel configuration. Output 1 and 2, in series configuration. Symetrical configuration with second output semi-regulated (±5% Uo nom).

Output Configuration The Q unit design allows high flexibility in output configuration to cover almost every individual requirement, by simply wiring the outputs in parallel, series or symmetrical configurations as per following figures. For further information and for parallel and series operation of several modules refer to: Electrical Output Data.

Fig. 3 Series output configuration (negative sense at load only)
Fig. 4 Symmetrical common ground output configuration

Input voltage range Ui: 16...36 V DC............................................... 38...75 V DC............................................... 48 Series.............................................................................. Q Number of outputs: Single output................................................... 1 Double output.................................................. 2 Nominal voltage output 1 (main output), Uo1 nom 5.1 V................................................................ 0 12 V................................................................. 3 15 V............................................................. 5 24 V................................................................. 6 other voltages...................................... Other specifications for main output........................ 01...99 Symmetrical double output units: Nominal voltage output 2, Uo1/2 nom (24 V series connected)............... (30 V series connected)............... (48 V series connected)............... 60 other symmetrical voltages.................... 70...99 Operational ambient temperature range TA: ­10...50 °C...................................................... -2 Output voltage control input (Auxiliary function)............. R Potentiometer (Option)..................................................... P

48Q2540-2P: DC-DC converter, input voltage range 38...75 V, double output, each providing 3.3 A, equipped with potentiometer and operating ambient temperature of ­10...50 °C.

Note: All units feature the following auxiliary functions which are not shown in the type designation: Input and output filters, inhibit, sense lines, current sharing, out OK signal and LED indicator. Product Marking Basic type designation, applicable safety approval and recognition marks, CE mark, warnings, pin allocation of input, output and auxiliary functions, Melcher patents and company logo. Identification of LED and potentiometer. Specific type designation, input voltage range, nominal output voltage and output current and degree of protection. Label with batch no., serial no. and data code including production site, modification status and date of production. Confirmation of successfully passed final test.


 

Related products with the same datasheet
48Q2320-2R
48Q2540-2R
Some Part number from the same manufacture
48Q2320-2R DC/DC Converter 5.1v 16a
4910A
4910B
4N29300 Optocoupler Photodarlington
4N35/D
5-1393090-0 Relay 2pole 24vdc
5-1393211-3 Relay Panel Dpco 12vdc
5-1393234-0 Relay Dpco 12vdc
5-1419111-0 Relay Plug in 115vac
5-1437007-1 Transition Connector Idc 26 Way
5/V280H.063447 Battery PCB Mount 6.0v
50A-10250 Delay Line-10 Tap 25ns
50B5814 Transistor MOSFET To-220
50N1386 Photo Tachometer
50N1387 LCR Meter
50N1388 Digital Sound Level Meter
52F2278 Ic-sm Voltage Regulator 3.3v
52F7508 Ac/dc Current Clamp Adap
52F7996 Analogue Multimeter
52F7997 Analogue Multimeter Deluxe
52F7999 Analog Meter Pocket
Same catergory

CS61318 : E1 Long Haul Line Interface Unit.

FS100UM-03 : N-channel Power MOSFET High-speed Switching Use: 30v, 100a. ˇ10V DRIVE ˇVDSS. 30V ˇrDS (ON) (MAX). 5.4m ˇID 100A ˇIntegrated Fast Recovery Diode (TYP.). 100ns APPLICATION Motor control, Lamp control, Solenoid control DC-DC converter, etc. Parameter Drain-source voltage Gate-source voltage Drain current Drain current (Pulsed) Avalanche drain current (Pulsed) Source current Source current (Pulsed) Maximum power.

IRFI630GPBF : 100V Single N-channel Lead-free HexFET Power MOSFET in a TO-220 Fullpak Package.

ZXFV202E5 : Video Amplifier. The is a single high speed amplifier designed for video and other high speed applications. Packaged in a small it is ideally suited to applications where space at a premium. In applications where cross talk is critical this part provides better isolation than dual or quad devices. fo r manc i gh out put dri compliments this part for use in video applications.

759P : Economy, Wideband Log/antilog Amplifiers. Low-Cost, Complete Log/Antilog Amplifier External Components Not Required; Internal Reference; Temperature Compensated Small Size: x 0.4" Fast Response: 200kHz Bandwidth (ISIG 1µA) 6 Decades Current Operation 1mA 1% max Error 200µA 2% max Error 1mA 4 Decades Voltages Operation 10V 1% max Error 2V 2% max Error to 10V APPLICATIONS Log Current or Voltage.

PR6FFXX : Surface Mount Crystals 3.5 x 6.0 x 1.2 mm. Miniature low profile package & 4 Pad) RoHS Compliant Wide frequency range PCMCIA - high density PCB assemblies PR (2 Pad) PP (4 Pad) MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete.

77061271P : Resistor Networks & Arrays 270 ohms 6Pin 2% Bussed. s: Manufacturer: CTS ; Product Category: Resistor Networks & Arrays ; RoHS:  Details ; Product Type: Networks ; Circuit Type: Bussed ; Number of Resistors: 5 ; Resistor Values: 270 Ohms ; Tolerance: 2 % ; Temperature Coefficient: 200 PPM / C ; Number of Pins: 6 ; Operating Temperature Range: - 55 C to + 125 C ; Dimensions:.

GRM1881X2A221JZ01D : 220pF Ceramic Capacitor 0603 (1608 Metric) 100V; CAP CER 220PF 100V SL 0603. s: Capacitance: 220pF ; Voltage - Rated: 100V ; Tolerance: ±5% ; Package / Case: 0603 (1608 Metric) ; Temperature Coefficient: SL ; Packaging: Tape & Reel (TR) ; : - ; Lead Spacing: - ; Operating Temperature: -55°C ~ 125°C ; Mounting Type: Surface Mount, MLCC ; Lead Free.

MLF2012DR68K : Fixed Inductors, Coils, Choke 680nH 150mA 0805 (2012 Metric) Ferrite Core; INDUCTOR MULTILAYER 0.68UH 0805. s: Inductance: 680nH ; Tolerance: ±10% ; Package / Case: 0805 (2012 Metric) ; Packaging: Digi-Reel® ; Type: Ferrite Core ; Current: 150mA ; Mounting Type: Surface Mount ; Q @ Freq: 25 @ 25MHz ; Frequency - Self Resonant: 190MHz ; DC Resistance.

TWL6040A2ZQZR : Interface - Codec Integrated Circuit (ics) Audio Codec Cut Tape (CT) 2.1V; IC AUDIO CODEC 8CH LP 120PBGA. s: Type: Audio Codec ; Number of ADCs / DACs: 2 / 4 ; Dynamic Range, ADCs / DACs (db) Typ: - ; S/N Ratio, ADCs / DACs (db) Typ: - ; Resolution (Bits): - ; Voltage - Supply, Analog: 2.1V ; Voltage - Supply, Digital: 1.8V ; Mounting Type: Surface.

2-1622821-0 : 0.15 Ohm 0.25W, 1/4W Chip Resistor - Surface Mount; RES 0.15 OHM 1/4W 5% 0805. s: Resistance (Ohms): 0.15 ; Power (Watts): 0.25W, 1/4W ; Tolerance: ±5% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: ±350ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

CRCW121888R7FKEK : 88.7 Ohm 1W Chip Resistor - Surface Mount; RES 88.7 OHM 1W 1% 1218 SMD. s: Resistance (Ohms): 88.7 ; Power (Watts): 1W ; Tolerance: ±1% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: ±100ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

SM2615FT40R2 : 40.2 Ohm 1W Chip Resistor - Surface Mount; RES 40.2 OHM 1W 1% WW 2615. s: Resistance (Ohms): 40.2 ; Power (Watts): 1W ; Tolerance: ±1% ; Packaging: Tape & Reel (TR) ; Composition: Wirewound ; Temperature Coefficient: ±20ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

TNPW20105K76BETF : 5.76K Ohm 0.4W Chip Resistor - Surface Mount; RES 5.76K OHM .40W 0.1% 2010. s: Resistance (Ohms): 5.76K ; Power (Watts): 0.4W ; Tolerance: ±0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: ±25ppm/°C ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant.

EF-DSP-PC-NL : Software Programmers, Development System; SOFTWARE SYS GEN FOR DSP. s: Type: System Generator ; For Use With/Related Products: Xilinx DSPs ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

M2012TYG01-HH : SPDT Rocker Switch On-On 0.4VA (AC/DC); SWITCH ROCKER SPDT 0.4VA 28V. s: Circuit: SPDT ; Switch Function: On-On ; Current Rating: 0.4VA (AC/DC) ; Voltage Rating - AC: 28V ; Voltage Rating - DC: 28V ; Actuator Style: Paddle ; Color - Actuator/Cap: Gray ; Actuator Marking: No Marking ; Illumination Type, Color: - ; Illumination Voltage (Nominal): - ; Mounting.

0805F0500683ZYT : CAPACITOR, CERAMIC, MULTILAYER, 50 V, Y5V, 0.068 uF, SURFACE MOUNT, 0805. s: Configuration / Form Factor: Chip Capacitor ; Technology: Multilayer ; Applications: General Purpose ; Electrostatic Capacitors: Ceramic Composition ; Capacitance Range: 0.0680 microF ; Capacitance Tolerance: 80 (+/- %) ; WVDC: 50 volts ; Mounting Style: Surface Mount Technology.

FVGSC-1 : 1 mm2, WIRE TERMINAL. s: Terminal Type: Wire Connector ; Material: NOT SPECIFIED ; North American: 16 AWG ; International: 1 mm2 ; : RoHS.

CFPB-1CC-2R9W : SWITCH PUSH SPST-NO 1MA 20V. s: Family: Pushbutton Switches ; Series: CFPB ; Packaging  : Tray   ; Type: Standard, Illuminated ; Circuit: SPST-NO ; Switch Function: Off-Mom ; Current Rating: 1mA (DC) ; Voltage Rating - AC: - ; Voltage Rating - DC: 20V ; Actuator Type: Square, Button ; Color - Actuator/Cap: Red ; Illumination Type,.

 
0-C     D-L     M-R     S-Z