|Description||Logic Module Logo|
|Datasheet||Download 6ED1053-1FB00-0BA2 datasheet|
Dear customer, Thank you for purchasing LOGO!, and congratulations on your decision. In LOGO! you have acquired a logic module that meets the stringent quality requirements of ISO 9001. LOGO! is universal in application. Its comprehensive functionality and great ease of use make it a highly costefficient solution for virtually any application.
This LOGO! manual tells you how to install, program and use LOGO!. You can find information on wiring in the LOGO! manual as well as in the LOGO! product information that is supplied with each device. You can get further information on programming LOGO! via the PC in the LOGO!Soft Comfort online help system. LOGO!Soft Comfort is the programming software for PCs. It runs under WINDOWSR and will help you get to know LOGO! and to write, test, print out and archive programs independently of LOGO!.
We have subdivided this manual into 9 chapters: S Getting to Know LOGO! S Installing and Wiring LOGO! S Programming LOGO! S LOGO! Functions S Parameterizing LOGO! S LOGO!'s Program Modules S LOGO! Software S Applications S Appendices
You can find answers to your LOGO! questions quickly and easily on the Internet at http://www.ad.siemens.de/logo.
This manual contains notices which you should observe to ensure your own personal safety, as well as to protect the product and connected equipment. These notices are highlighted in the manual by a warning triangle and are marked as follows according to the level of danger:
Indicates that death, severe personal injury or substantial damage to property will result if proper precautions are not taken.
Indicates that death, severe personal injury or substantial damage to property can result if proper precautions are not taken.
Indicates that personal injury or damage to property can result if proper precautions are not taken.
Draws your intention to particularly important information on the product, handling the product, to a particular part of the documentation.
Only qualified personnel should be allowed to install and work on this equipment. Qualified personnel are defined as persons who are authorized to commission, to ground and to tag circuits, equipment and systems in accordance with established safety practices and standards.
This device may only be used for the applications described in the catalog and the technical description, and only with non Siemens devices or components if they have been approved or recommended by Siemens. This product can only function correctly and safely it is transported, stored, set up, and installed correctly, and operated and maintained as recommended.
The reproduction, transmission or use of this document or its contents is not permitted without express written authority. Offenders will be liable for damages. All rights reserved, in particular in the event of a patent being granted or the registration of a utility model or design.
We have checked the contents of this manual for agreement with the hardware and software described. Nevertheless, discrepancies cannot be ruled out, and we therefore cannot guarantee full correspondence. However, the data in this manual is reviewed regularly and any necessary corrections included in subsequent editions. Suggestions for improvement are welcomed.
|Related products with the same datasheet|
|Some Part number from the same manufacture|
|6ED1053-1FH00-0BA1 Logic Module Logo|
|6EP1311-1SH01 Psu 5v 3a Din Rail|
|6EP1336-2BA00 Psu 24v 20a Din Rail|
|6EP1351-1SH01 Psu 15v 1.85a Din Rail|
|6EP1434-2BA00 Psu 24v 10a Din Rail|
|6PK-322 Coax Cable Stripper|
|6T2.5/245 Timing Belt Synchroflex|
|7-1393091-0 Relay 3pole 24vdc|
|7-1393163-4 Multimode Led Module 24vdc|
|7-1393211-1 Relay Panel Dpno 24vdc|
|7-1393215-5 Relay PCB 24vdc|
|7-1393222-9 Relay PCB 6vdc|
|7-1437007-7 Transition Connector Idc 40 Way|
|70A-5101 Delay Line-5 Tap 100ns|
|70U20 Diode 250a 200v|
|73-560-0095 Psu 600w 4 O/p|
|74-4900 Door Closer (silver)|