Details, datasheet, quote on part number: 73-560-0095
Part73-560-0095
Category
DescriptionPsu 600w 4 O/p
CompanyN.A.
DatasheetDownload 73-560-0095 datasheet
  

 

Features, Applications

Current share on all main outputs with ratings A or greater Remote sense on all outputs with ratings greater than 2 A Overload protection on all outputs Voltage adjustment on all outputs Margining on all single output modules Input-OK-signal and status indicator LED Global DC OK signal and status indicator LED Global and individual module inhibits/enable 1 year warranty Forced air cooling, field replaceable fan Isolated 5 V bias voltage Power factor correction IEC EN61000-3-2 harmonic distortion compliance CISPR 22, EN55022 Curve B conducted / radiated EMI IEC 801 immunity standards European CE Mark requirements Optional VME timing and system DC OK module Low leakage option for medical applications

Operating temperature: to 50C (start @ 0C) (derate each output linearly to 40C max. with rear air option) Shock/Vibration: Mil-Hdbk 810E Humidity: 95% non-condensing Storage temperature: to +85C Temperature coefficient: 0.02% per C Cooling: Internal DC fan (Field replaceable) (P/N 73-688-0001)

UL CSA IEC VDE BABT E133211 CSA22.2 No. 234 Level LR53982 IEC950, Class EN60950 11774-3336-xxxx Compliance BS 7002 Certificate and report Mark

ASTEC ASIA 6F., China Dyeing Works Building 382-392 Castle Peak Road Tsuen Wan, N.T., Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426

ASTEC EUROPE Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, 1LX, UK Telephone: 01384-842211 Facsimile: 01384-843355

ASTEC AMERICA 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698

Input voltage...........................85-264 VAC 120-350 VDC Frequency..............................47-440 Hz Inrush current.........................40 A peak max. Efficiency................................70-80% typ. @ full case load Power factor...........................0.99 typ. meets EN61000-3-2 Turn-on time...........................AC on 1.5 sec typ., Inhibit / Enable 150 ms typ. EMI filter standard..................CISPR 22 EN55022 Level "B" EMI filter (low leakage option)...CISPR 22 EN55022 Level "A" Leakage current standard......2.0 mA max. @ 240 VAC Leakage current (low leakage option)...............300 A max. @ 240 VAC Radiated EMI.........................CISPR 22 EN55022 Level "B" Holdover storage....................20 ms minimum (independent of input VAC) OK....................................>5 ms early warning min. before outputs loose regulation Full cycle ride thru (50 Hz) Harmonic distortion................Meets EN61000-3-2 Isolation..................................Meets EN60950 Global Inhibit/Enable..............TTL, Logic "1" and Logic "0" Input fuse A Warranty.................................1 year

Adjustment range...................10% min. all outputs Margining...............................4-6% nom.1 Overall 20 mV max. (36 W modules 4% max.) Ripple.....................................RMS: or 10 mV, whichever is greater Pk-Pk: or 50 mV, whichever is greater Bandwidth limited to 20 MHz Dynamic or 100 mV, with 25% load step. Recovery time........................To within in <300 sec. Overcurrent protection...........Single, main of dual output module 105-120% of rated output current. Aux output of dual output module 105-140% of rated output current. Triple output module Internally protected Short circuit protection...........Protected for continuous short circuit. Recovery is automatic upon removal of short Overvoltage protection...........Single output modules (measured at sense V 122-134% connection) V 110-120% Dual output module V 110-120% Triple output module. No overvoltage protection provided. Recycle the AC input voltage to reset OVP circuit Reverse voltage protection...............................100% of rated output current Thermal protection.................All outputs disabled when internal temp exceeds safe operating range. >5 ms warning (AC OK signal) before shutdown Remote sense........................Up 0.5 V total drop Single wire parallel.................Current share to within 2% of total rated current -8% of nominal for any monitored output 2 Minimum load.........................Not required on single or triple output modules. 10% required on main of dual output modules 3 (Consult factory if pre-loaded required) Housekeeping Bias voltage...........................5 VDC @250 mA max. present whenever AC input is applied Module inhibit.........................TTL, isolated, singles and dual (both outputs) only Switching frequency...............250 kHz Output/Output isolation..........>1 Megohm

Notes: 1 Single output modules only. 2 Single and main of dual output modules only. 3 Contact factory for optional preload if required.

Case Size (inches): 10, 5 available slots, 400 W max. 11, 5 available slots, 600 W max. 10, 6 available slots, 800 W max. 11, 7 available slots, 1000 W max. & MP1 Only) Slot #6

Option Code: = no options 1 = rear air exhaust 3 = global enable 5 = option package (options 3) M =low leakage N = low leakage plus option P = low leakage plus option R = low leakage plus option 5 (MP1 Only) Slot #7

or 3 Digit Code See Output Currents Next Page

Use " for Standard Remote Sense Use / " After any module using Remote Sense with o-ring diode (redundancy)

Notes: 1 Omit digits that do not apply. 2 Specify modules from lowest number of outputs to highest.(Single/Dual/Triple) 3 If number of outputs are equal, specify modules from highest to lowest power increments. If power increments are equal, specify in decending alphabetical order (1A, B, C...). 4 Always start with Slot 1. 5 All MVP model configurations created using this selection guide are standard MVP products with standard availability and lead times.


 

Some Part number from the same manufacture
74-4900 Door Closer (silver)
74ABH16244ADGG
74ABH16244ADL
74ABT
74ABT126PWDH
74ABT16
74ABT2240DB
74ABT2245N
74ABT245N Ic-bus Interface Logic
74ABT245PWDH
74ABT377PWADH
74ABT648PWDH
74ABT651PWDH
74ABT833PWDH
74ABT834D
74ABT834N
74ABT845PWDH
74ABT9253N
74ABTD373AB
74ABTH16245BDGG
74ABTH16501A
Same catergory

FS10SM-16A : Type = Planar Process=>200V ;; Voltage = 800V ;; Rdson = 980 ;; Package = Obsolete ;; Drive Voltage = N/a.

Q62702F1591 : Transistor R.f Sot343. NPN Silicon RF Transistor For high gain low noise amplifiers For oscillators to 10 GHz Noise figure at 1.8 GHz outstanding Gms at 1.8 GHz Transition frequency = 25 GHz Gold metalization for high reliability SIEGET 25 - Line Siemens Grounded Emitter Transistor 25 GHz T - Line ESD: Electrostatic discharge sensitive device, observe handling precaution!.

ST24C01B1TR : Serial 1k 128 X 8 EePROM. 1 MILLION ERASE/WRITE CYCLES with 40 YEARS DATA RETENTION SINGLE SUPPLY VOLTAGE: to 5.5V for ST24x01 versions to 5.5V for ST25x01 versions to 5.5V for ST24C01R version only HARDWARE WRITE CONTROL VERSIONS: ST24W01 and ST25W01 TWO WIRE SERIAL INTERFACE, FULLY I2C BUS COMPATIBLE BYTE and MULTIBYTE WRITE (up to 4 BYTES) PAGE WRITE (up to 8 BYTES) BYTE,.

MA11TAX : 14 pin DIP, 5.0 Volt, Acmos/ttl, Clock Oscillator. MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. .

FF0650L : LOW PASS Video Filter. These low pass video filters are intended for bandwidth limitation over the video range of frequencies. The filters are 7-pole Elliptical Function networks which have been equalised to correct for group delay distortion over 95% of the passband and for loss distortion over the entire passband. Degradation of a composite video signal is minimal when.

ATAVRXPLAIN : Development Boards & Kits - AVR EVALUATION KIT FOR ATXMEGA128A1. s: Manufacturer: Atmel ; Product Category: Development Boards & Kits - AVR ; RoHS:  Details ; Tool Type: Development Kit ; Core Architecture: AVR ; Data Bus Width: 8 bit ; CPU Core: AVR 8 ; Factory Pack Quantity: 1.

UV3TZ-400-15 : Standard LED - Through Hole UV Purple 400nm Water Clear. » » » LEDs - High Brightness - Leaded - Violet/UV LEDs - High Brightness - Leaded - Violet/UV Standard Leaded LED components are often used in indication applications and generally have power levels s: Manufacturer: BIVAR ; Product Category: Standard LED - Through Hole ; RoHS:.

Q126E : SENSOR, TX, 2M, PNP, CABLE. s: Sensing Range: - ; Sensor Output: - ; Supply Voltage Range DC: 10V to 30V.

ECQ-V1H153JL9 : 0.015F Film Capacitor Radial; CAP FILM 0.015UF 50VDC RADIAL. s: Capacitance: 0.015F ; Tolerance: 5% ; Dielectric Material: Polyester, Metallized - Stacked ; Package / Case: Radial ; Packaging: Tape & Reel (TR) ; Lead Spacing: 0.197" (5.00mm) ; ESR (Equivalent Series Resistance): - ; Mounting Type: Through Hole ; : General Purpose ; Lead Free.

FTSH-107-04-F-DV : Gold Surface Mount Rectangular - Headers, Male Pin Connectors, Interconnect Header, Unshrouded; CONN HEADER 14POS DUAL .05" SMD. s: Color: Black ; Connector Type: Header, Unshrouded ; Contact Finish: Gold ; Contact Mating Length: 0.150" (3.81mm) ; : - ; Mounting Type: Surface Mount ; Number of Positions Loaded: All ; Number of Rows: 2 ; Pitch: 0.050".

SML-011YTT86 : LEDs -; LED 590NM YLW TRANSPARENT 1208. s: Color: Yellow ; Lens Style/Size: Rectangle with Flat Top, 2.3mm x 1.6mm ; Millicandela Rating: 63mcd ; Voltage - Forward (Vf) Typ: 2V ; Wavelength - Dominant: 590nm ; Wavelength - Peak: 590nm ; Current - Test: 20mA ; Viewing Angle: - ; Lens Type: Clear ; Luminous Flux @ Current - Test: - ; Package / Case: 1208.

BAV102-7 : Diodes, Rectifier - Single Discrete Semiconductor Product 125mA 150V Standard; DIODE SWITCH 150V 500MW MINIMELF. s: Diode Type: Standard ; Voltage - DC Reverse (Vr) (Max): 150V ; Current - Average Rectified (Io): 125mA ; Voltage - Forward (Vf) (Max) @ If: 1V @ 100mA ; Reverse Recovery Time (trr): 50ns ; Current - Reverse Leakage @ Vr: 100nA @ 150V ; Speed:.

MP01403 : 1 FUNCTIONS, 284 MHz, SAW FILTER. s: Filter Design: Saw Filter ; Insertion Loss: 4.5 dB ; Package Type: Surface Mount ; Operating Temperature: 14 to 122 F (263 to 323 K).

1221 : RESISTOR, POTENTIOMETER, CONDUCTIVE PLASTIC, 1 TURN(S), 0.5 W, 400 ohm - 75000 ohm. s: Potentiometer Type: Standard Potentiometer ; Resistance Taper: Linear ; Mounting / Packaging: Panel Mount (Bushing) ; Operating Temperature: -55 to 125 C (-67 to 257 F).

1689983 : 5 CONTACT(S), FEMALE, D SUBMINIATURE CONNECTOR, SOCKET. s: Connector Type: D-Sub ; Gender: Female ; Number of Contacts: 5.

 
0-C     D-L     M-R     S-Z