Details, datasheet, quote on part number: AD648AH
PartAD648AH
Category
Description
CompanyN.A.
DatasheetDownload AD648AH datasheet
Cross ref.Similar parts: LF147, LF147JAN, LF147QML, LF156JAN, LF256, LF347, LF347-N, LF347B, LF353, LF353-N
Quote
Find where to buy
 
  

 

Features, Applications

FEATURES DC Performance 400 A max Quiescent Current 10 pA max Bias Current, Warmed 300 V max Offset Voltage V/ C max Drift 2 V p-p Noise, Hz AC Performance V/ s Slew Rate 1 MHz Unity Gain Bandwidth Available in Plastic Mini-DIP, Cerdip, Plastic SOIC and Hermetic Metal Can Packages MIL-STD-883B Parts Available Surface Mount (SOIC) Package Available in Tape and Reel in Accordance with EIA-481A Standard Single Version: AD548 PRODUCT DESCRIPTION

The is a matched pair of low power, precision monolithic operational amplifiers. It offers both low bias current (10 pA max, warmed up) and low quiescent current (400 A max) and is fabricated with ion-implanted FET and laser wafer trimming technologies. Input bias current is guaranteed over the AD648's entire common-mode voltage range. The economical J grade has a maximum guaranteed offset voltage of less than 2 mV and an offset voltage drift of less than 20 V/C. The C grade reduces offset voltage to less than 0.30 mV and offset voltage drift to less than 3 V/C. This level of dc precision is achieved utilizing Analog's laser wafer drift trimming process. The combination of low quiescent current and low offset voltage drift minimizes changes in input offset voltage due to self-heating effects. Five additional grades are offered over the commercial, industrial and military temperature ranges. The AD648 is recommended for any dual supply op amp application requiring low power and excellent dc and ac performance. In applications such as battery-powered, precision instrument front ends and CMOS DAC buffers, the AD648's excellent combination of low input offset voltage and drift, low bias current and low 1/f noise reduces output errors. High common-mode rejection (86 dB, min on the "C" grade) and high open-loop gain ensures better than 12-bit linearity in high impedance, buffer applications. The AD648 is pinned out in a standard dual op amp configuration and is available in seven performance grades. The AD648J and AD648K are rated over the commercial temperature range to +70C. The AD648A, AD648B and AD648C are rated over the industrial temperature range to +85C. REV. C

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

The AD648S and AD648T are rated over the military temperature range to +125C and are available processed to MIL-STD-883B, Rev. C. The AD648 is available an 8-pin plastic mini-DIP, cerdip, SOIC, TO-99 metal can, or in chip form.

1. A combination of low supply current, excellent dc and ac performance and low drift makes the AD648 the ideal op amp for high performance, low power applications. 2. The AD648 is pin compatible with industry standard dual op amps such as the LF442, TL062, and AD642, enabling designers to improve performance while achieving a reduction in power dissipation 85%. 3. Guaranteed low input offset voltage (2 mV max) and drift (20 V/C max) for the AD648J are achieved utilizing Analog Devices' laser drift trimming technology. 4. Analog Devices specifies each device in the warmed-up condition, insuring that the device will meet its published specifications in actual use. 5. Matching characteristics are excellent for all grades. The input offset voltage matching between amplifiers in the AD648J is within 2 mV, for the C grade matching is within 0.4 mV. 6. Crosstalk between amplifiers is less than at 1 kHz. 7. The AD648 is available in chip form.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 617/329-4700 Fax: 617/326-8703

Model Min INPUT OFFSET VOLTAGE 1 Initial Offset TMIN to TMAX vs. Temperature vs. Supply vs. Supply, T MIN to TMAX Long-Term Offset Stability INPUT BIAS CURRENT Either Input, 2 VCM = 0 Either Input 2 at TMAX, VCM = 0 Max Input Bias Current Over Common-Mode Voltage Range Offset Current, = 0 Offset Current at T MAX MATCHING CHARACTERISTICS 3 Input Offset Voltage Input Offset Voltage T MIN to T MAX Input Offset Voltage vs. Temperature Input Bias Current Crosstalk INPUT IMPEDANCE Differential Common Mode INPUT VOLTAGE RANGE Differential 4 Common Mode Common-Mode Rejection VCM 10 V TMIN to TMAX VCM 11 V TMIN to TMAX INPUT VOLTAGE NOISE Voltage = 1 kHz = 10 kHz INPUT CURRENT NOISE = 1 kHz FREQUENCY RESPONSE Unity Gain, Small Signal Full Power Response Slew Rate, Unity Gain Settling Time 0.01% OPEN-LOOP GAIN 10 k TMIN to TMAX, 10 V, TMIN to TMAX, 5 k OUTPUT CHARACTERISTICS Voltage 10 k, TMIN to TMAX Voltage k, TMIN to TMAX Short Circuit Current POWER SUPPLY Rated Performance Operating Range Quiescent Current (Both Amplifiers) TEMPERATURE RANGE Operating, Rated Performance Commercial to +70 C) Industrial to +85C) Military to +125C) PACKAGE OPTIONS SOIC (R-8) Plastic (N-8) Cerdip (Q-8) Metal Can (H-08A) Tape and Reel Chips Available 0.8 1.0


NOTES 1 Input Offset Voltage specifications are guaranteed after 5 minutes of operation +25C. 2 Bias Current specifications are guaranteed maximum at either input after 5 minutes of operation = +25C. For higher temperature, the current doubles every 10C. 3 Matching is defined as the difference between parameters of the two amplifiers. 4 Defined as voltages between inputs, such that neither exceeds 10 V from ground. Specifications subject to change without notice.

Supply Voltage. 18 V Internal Power 500 mW Input 18 V Output Short Circuit Duration. Indefinite Differential Input Voltage. +VS and VS Storage Temperature Range (Q, H). to +150C Storage Temperature Range (N, R). to +125C Operating Temperature Range to +125C Lead Temperature Range (Soldering 60 sec). +300C

NOTES 1 Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. 2 Thermal Characteristics: 8-Pin Plastic Package: 165C/Watt 8-Pin Cerdip Package: 110C/Watt 8-Pin Metal Package: 150C/Watt 8-Pin SOIC Package: 160C/Watt 3 For supply voltages less than 18 V, the absolute maximum input voltage is equal to the supply voltage.

Contact factory for latest dimensions. Dimensions shown in inches and (mm).

CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although the AD648 features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.


 

Some Part number from the same manufacture
AD648BH
AD648BQ
AD648CQ
AD648TH/883B
AD648TQ/883B
AD664/883B
AD711AH
AD711BH
AD711BQ
AD711CH
AD711CQ
AD711SQ/883B
AD711TQ/883B
AD712AH
AD712BH
AD712CH
AD712CQ
AD713SQ
AD713SQ/883B
AD713TQ
AD713TQ/883B
Same catergory

IRGBC40M : Medium Voltage 600-1199 Volts. Short Circuit Rated Fast Igbt Insulated Gate Bipolar Transistor.

IXFX50N50 : HiperFET (tm) Power MOSFETs: 500v, 50a. Symbol V DSS VDGR VGS VGSM ID25 IDM IAR EAR EAS dv/dt PD TJ TJM Tstg TL Md Weight mm (0.063 in.) from case for 10 s Mounting torque Test Conditions to 150C; RGS 1 M Continuous Transient = 25C, pulse width limited by TJM 25C IS IDM, di/dt 100 A/s, VDD VDSS 50N50 55N50 International standard package Low RDS (on) HDMOSTM process Rugged polysilicon.

MH8S64PHC : 512m (8mx64) Sdram Module. Some contents are subject to change without notice. The 8388608 - word by 64-bit Synchronous DRAM module. This consists of four industry standard 8Mx16 Synchronous DRAMs in TSOP and one industory standard EEPROM in TSSOP. The mounting of TSOP on a card edge Dual Inline package provides any application where high densities and large quantities of memory.

ISL21007BFB812 : Precision, Low Noise FGA Voltage References The ISL21007 FGA voltage references are extremely low power, high precision, and low noise voltage references fabricated on Intersils proprietary Floating Gate Analog technology. The ISL21007 very low noise (4μVP-P for 0.1Hz to 10Hz) and very low operating current (150μA, Max). In addition, the ISL21007.

SG6980SZ : Single-stage PFC Controller. The highly integrated SG6980 is designed for power supplies with boost power-factor-correction (PFC). It requires very few external components to achieve desirable operation and includes versatile protections / compensation. It is available in 16-pin DIP and SOP packages. The innovative switching-charge multiplier divider enhances the PFC circuit's.

LDEIH4100 : Pen-pet H.T. The part number, comprising 14 digits, is formed as follows: Digit to 3 Series code (L = leadless; DE = polyester family) Digit 4 d.c. or a.c. rated voltage (VR). P =630Vdc Digit 5 Size code: Series Rated voltage = 50Vdc) Size code = 22.20) Capacitance = 0.47F Tolerance = 5%) Dielectric (A = PEN) Version (5 = standard) Packing (N= Tape) Internal use Digits.

LMK432BJ226MM-T : 22F Ceramic Capacitor 1812 (4532 Metric) 10V; CAP CER 22UF 10V X5R 1812. s: Capacitance: 22F ; Voltage - Rated: 10V ; Tolerance: 20% ; Package / Case: 1812 (4532 Metric) ; Temperature Coefficient: X5R ; Packaging: Cut Tape (CT) ; : - ; Lead Spacing: - ; Operating Temperature: -55C ~ 85C ; Mounting Type: Surface Mount, MLCC ; Lead Free Status: Lead.

1300170004 : Polyamide Free Hanging (In-Line) Circular Connectors, Interconnect Plug, Female Sockets; CONN 3P FEM SCKT INT THREAD STR. s: Connector Type: Plug, Female Sockets ; Shell Size - Insert: - ; Mounting Type: Free Hanging (In-Line) ; Fastening Type: Threaded ; : - ; Packaging: Bulk ; Number of Positions: 3 ; Termination: Screw ; Shell Material, Finish: Polyamide.

74AVC16373DGG,118 : Latches IC 16BIT D TRANSP LATCH. s: Manufacturer: NXP ; RoHS:  Details ; Number of Circuits: 2 ; Logic Type: CMOS ; Logic Family: AVC ; Polarity: Non-Inverting ; Number of Output Lines: 16 ; High Level Output Current: - 12 mA ; Propagation Delay Time: 2.2 ns at 1.65 V to 1.95 V ; Supply Voltage (Max): 3.6 V ; Supply Voltage (Min): 1.4 V ; Maximum.

07004118015 : 380 CONTACT(S), MALE, STRAIGHT TWO PART EURO CONNECTOR, PRESS FIT. s: Connector Type: TWO PART EURO CONNECTOR ; Gender: Male ; Termination Types: PRESS FIT ; Number of Contacts: 380.

B471-8I-10 : UNSHIELDED, 0.34 uH - 0.47 uH, VARIABLE INDUCTOR. s: Devices in Package: 1 ; Core Material: Powdered Iron ; Lead Style: Radial, FLAT ; Configuration: Variable ; Application: RF Choke ; Inductance Range: 0.3400 to 0.4700 microH ; DCR: 1 ohms ; Testing Frequency: 25000 kHz ; Operating Temperature: -55 to 125 C (-67 to 257 F).

BUP46R1 : 60 A, 60 V, NPN, Si, POWER TRANSISTOR, TO-204AE. s: Polarity: NPN ; Package Type: TO-3, HERMETIC SEALED, METAL, TO-3, 2 PIN.

HBC25ZH-T : 1-OUTPUT 300 W DC-DC REG PWR SUPPLY MODULE. s: Output Voltage: 9.6 to 13.2 volts ; Input Voltage: 36 to 75 volts ; Output Power: 300 watts (0.4021 HP).

SN75270N : 7 LINE DRIVER, DIP16. s: Device Type: Line / Bus Driver ; Supply Voltage: 5V ; Operating Temperature: 0 to 70 C (32 to 158 F) ; Package Type: DIP, DIP-16 ; Pins: 16.

BEM-24368-D47 : Microphones omni-directional MICROPHONE. Knowles BEM Series Microphone is an improved version of the EM microphone. It offers enhanced PFA performance, as well as power-on reset and an electrical high pass filter. The BEM is ideal in directional applications as a matched omni-directional pair. s: Manufacturer: Knowles ; Product Category: Microphones.

 
0-C     D-L     M-R     S-Z