Details, datasheet, quote on part number: AK6440AM
PartAK6440AM
Category
Description
CompanyN.A.
DatasheetDownload AK6440AM datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Features

ADVANCED CMOS EEPROM TECHNOLOGY Wide Vcc (1.8V 5.5V) operation AK6420A 2048 bits: 16 organization AK6440A 4096 bits: 16 organization AK6480A 8192 bits: 16 organization ONE CHIP MICROCOMPUTER INTERFACE - Interface with one chip microcomputer's serial communication port directly LOW POWER CONSUMPTION - 0.75mA Max (Read operation) - 0.8A Max (Standby mode) HIGH RELIABILITY -Endurance -Data Retention : 100K cycles : 10 years

SPECIAL FEATURES - High speed operation ) - Automatic write cycle time-out with auto-ERASE - Automatic address increment (READ) - Ready/Busy status signal - Software and Hardware controlled write protection IDEAL FOR LOW DENSITY DATA STORAGE - Low cost, space saving, 8-pin package (SOP , SSOP)

General Description The a 2048/4096/8192bit, serial, read/write, non-volatile memory device fabricated using an advanced CMOS EEPROM technology. The AK6420A has 2048bits of memory organized into 128 registers of 16 bits each. The AK6440A has 4096bits of memory organized into 256 registers of 16 bits each. The AK6480A has 8192bits of memory organized into 512 registers of 16 bits each. The AK6420A/40A/80A can operate full function under wide operating voltage range from to 5.5V. The charge up circuit is integrated for high voltage generation that is used for write operation. The AK6420A/40A/80A can connect to the serial communication port of popular one chip microcomputer directly (3 line negative clock synchronous interface). At write operation, AK6420A/40A/80A takes in the write data from data input pin (DI) to a register synchronously with rising edge of input pulse of serial clock pin (SK). And at read operation, AK6420A/40A/80A takes out the read data from a register to data output pin (DO) synchronously with falling edge of SK. The AK6420A/40A/80A has 4 instructions such as READ, WRITE, WREN (write enable) and WRDS (write disable). Each instruction is organized by op-code block (8bits), address block (8bits) and data 2). When input level of SK pin is high level and input level of chip select (CS) pin is changed from high level to low level, AK6420A/40A/80A can receive the instructions. Special features of the AK6420A/40A/80A include : automatic write time-out with auto-ERASE, Ready/Busy status signal output and ultra-low standby power mode when deselected (CS=high). Software and Hardware controlled write protection The AK6420A/40A/80A has 2 (hardware and software) write protection functions. After power on or after execution of WRDS (write disable) instruction, execution of WRITE instruction will be disabled. This write protection condition continues until WREN instruction is executed or Vcc is removed from the part. Execution of READ instruction is independent of both WREN and WRDS instructions. Reset pin should be low level when WRITE instruction is executed. When the Reset pin is high level, the WRITE instruction is not executed. Ready/Busy status signal During the automatic write time-out period (BUSY status), the AK6420A/40A/80A can't accept the other instructions. The AK6420A/40A/80A has 2 functions to know the Busy status from exterior. The RDY/BUSY pin indicates the Busy status regardless of the CS pin status. The RDY/BUSY pin outputs the low level regardless of the CS pin status during Busy status. Except the above status, this pin outputs high level. Also the DO pin indicates the Busy status. When input level of SK pin is low level and input level of CS pin is changed from high level to low level, the is in the status output mode and the DO pin indicates the Ready/Busy status. The Ready/Busy status outputs on DO pin until CS pin is changed from low level to high level, or first bit ("1") of op-code of next instruction is given to the part. Except when the device is in the status output mode or outputs data, the DO pin is in the high impedance state. Type of Products Model AK6480AF AK6480AM

Package 8pin Plastic SOP 8pin Plastic SSOP 8pin Plastic SOP 8pin Plastic SSOP 8pin Plastic SOP 8pin Plastic SSOP


 

Some Part number from the same manufacture
AK6440AM-E2
AK6440HF
AK6480A
AK6480AF
AK6480AM
AK6480AM-E2
AK6480HF
AK6510A
AK6510A32KBIT
AK6512A
AK6512A64KBIT
AK93C10
AK93C10A
AK93C41A
AK93C41AV
AK93C45A
AK93C45AF
AK93C45ANF
AK93C45AV
AK93C45B
AK93C46
Same catergory

K1682-K60 : Multilayer Chip Capacitors. High volumetric efficiency Non-linear capacitance change High insulation resistance High pulse strength Applications Sizes 0402 through 1210: silver/nickel/tin Sizes 1812, 2220: silver palladium q For conductive adhesion: All sizes: silver palladium Packing q Blister and cardboard tape, for details refer to chapter "Taping and Packing", page 111. q Bulk.

LCC20AM1000BT0 : Hermetic, 50 Mil Pitch, Leadless Chip Resistor Networks. Hermetic, 50 Mil Pitch, Leadless Chip Resistor Networks Lead (Pb)-free available High purity alumina substrate for high power dissipation Leach resistant terminations with nickel barrier 20, 24 terminal gold plated wraparound true hermetic packaging Military/Aerospace Hermetically sealed Isolated/Bussed circuits Ideal for military/aerospace applications.

JX-41 : ACTUATOR, 6OZF, ZX SERIES SWITCH. s: For Use With: Honeywell SX Series Micro Switches ; Operating Force Max: 6ozf ; Mounting Hole Dia: - ; Differential Travel Max: 0.635mm ; Over Travel Min: 0.381mm.

GRM1886T1H2R8CD01D : 2.8pF Ceramic Capacitor 0603 (1608 Metric) 50V; CAP CER 2.8PF 50V T2H 0603. s: Capacitance: 2.8pF ; Voltage - Rated: 50V ; Tolerance: 0.25pF ; Package / Case: 0603 (1608 Metric) ; Temperature Coefficient: T2H ; Packaging: Tape & Reel (TR) ; : - ; Lead Spacing: - ; Operating Temperature: -55C ~ 125C ; Mounting Type: Surface Mount, MLCC ; Lead.

BU-34 : Alligator Clip. s: Connector Type: - ; Jaw Opening Max: 0.219" ; Current Rating: - ; Insulator Color: - ; Termination Method: -.

FWJ-20-01-T-S : Tin Through Hole Rectangular - Headers, Male Pin Connectors, Interconnect Header, Unshrouded; CONN HEADER .156" 20POS SNGL TIN. s: Color: Black ; Connector Type: Header, Unshrouded ; Contact Finish: Tin ; Contact Mating Length: 0.450" (11.43mm) ; : - ; Mounting Type: Through Hole ; Number of Positions Loaded: All ; Number of Rows: 1 ; Pitch: 0.156".

GTC02R-40-53P : Olive Drab, Silver Plated Panel Mount, Flange; Through Hole Circular Connectors, Interconnect Receptacle, Male Pins; CONN RCPT 60POS BOX MNT W/PINS. s: Connector Type: Receptacle, Male Pins ; Shell Size - Insert: 40-53 ; Mounting Type: Panel Mount, Flange; Through Hole ; Fastening Type: Reverse Bayonet Lock ; : - ; Packaging: Bulk ; Number of Positions:.

REF5025SKGD1 : Pmic - Voltage Reference Integrated Circuit (ics) Series, Precision Tray - 2.5V; IC VREF SERIES PREC 2.5V 0-XCEPT. s: Reference Type: Series, Precision ; Voltage - Output: 2.5V ; Tolerance: 0.9% ; Temperature Coefficient: 55ppm/C ; Voltage - Input: 3.25 V ~ 18 V ; Number of Channels: 1 ; Current - Cathode: - ; Current - Quiescent: 1.2mA ; Current.

MFR-25FBF-19R6 : 19.6 Ohm 0.25W, 1/4W Through Hole Resistors; RES 19.6 OHM 1/4W 1% METAL FILM. s: Resistance (Ohms): 19.6 ; Power (Watts): 0.25W, 1/4W ; Tolerance: 1% ; Packaging: Bulk ; Composition: Metal Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

7-466571-7 : Crimpers, Applicators, Press - Accessory Tool; SPARE PARTS KIT HDM APPLICATOR. s: Lead Free Status: Lead Not Applicable ; RoHS Status: RoHS Not Applicable.

PTVS28VS1UR,115 : Tv - Diode Circuit Protection 28V 400W; TVS UNI-DIR 28V 400W SOD123W. s: Package / Case: SOD-123W ; Packaging: Tape & Reel (TR) ; Polarization: Unidirectional ; Power (Watts): 400W ; Voltage - Reverse Standoff (Typ): 28V ; Voltage - Breakdown: 31.1V ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

EMM5836V1B : 17700 MHz - 19700 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER. s: Amplifier Type: Power Amplifier ; Applications: RF Microwave ; Frequency Range: 17700 to 19700 MHz ; Minimum Gain: 22 dB ; Package Type: ROHS COMPLIANT, HERMETIC SEALED, METAL CERAMIC, CASE V1B, SMT, 16 PIN ; Nominal Impedance: 50 ; Operating Temperature: -40 to 85 C (-40 to 185 F).

TA20301203DH : 1884 A, SCR. s: VRRM: 3000 volts ; IT(RMS): 1884 amps ; IGT: 200 mA ; Package Type: TA2, 3 PIN ; Pin Count: 2.

2SB1150-K-AZ : 3 A, 70 V, PNP, Si, POWER TRANSISTOR. s: Polarity: PNP.

 
0-C     D-L     M-R     S-Z