Details, datasheet, quote on part number: AK6480AM
DatasheetDownload AK6480AM datasheet
Find where to buy


Features, Applications


ADVANCED CMOS EEPROM TECHNOLOGY Wide Vcc (1.8V 5.5V) operation AK6420A 2048 bits: 16 organization AK6440A 4096 bits: 16 organization AK6480A 8192 bits: 16 organization ONE CHIP MICROCOMPUTER INTERFACE - Interface with one chip microcomputer's serial communication port directly LOW POWER CONSUMPTION - 0.75mA Max (Read operation) - 0.8A Max (Standby mode) HIGH RELIABILITY -Endurance -Data Retention : 100K cycles : 10 years

SPECIAL FEATURES - High speed operation ) - Automatic write cycle time-out with auto-ERASE - Automatic address increment (READ) - Ready/Busy status signal - Software and Hardware controlled write protection IDEAL FOR LOW DENSITY DATA STORAGE - Low cost, space saving, 8-pin package (SOP , SSOP)

General Description The a 2048/4096/8192bit, serial, read/write, non-volatile memory device fabricated using an advanced CMOS EEPROM technology. The AK6420A has 2048bits of memory organized into 128 registers of 16 bits each. The AK6440A has 4096bits of memory organized into 256 registers of 16 bits each. The AK6480A has 8192bits of memory organized into 512 registers of 16 bits each. The AK6420A/40A/80A can operate full function under wide operating voltage range from to 5.5V. The charge up circuit is integrated for high voltage generation that is used for write operation. The AK6420A/40A/80A can connect to the serial communication port of popular one chip microcomputer directly (3 line negative clock synchronous interface). At write operation, AK6420A/40A/80A takes in the write data from data input pin (DI) to a register synchronously with rising edge of input pulse of serial clock pin (SK). And at read operation, AK6420A/40A/80A takes out the read data from a register to data output pin (DO) synchronously with falling edge of SK. The AK6420A/40A/80A has 4 instructions such as READ, WRITE, WREN (write enable) and WRDS (write disable). Each instruction is organized by op-code block (8bits), address block (8bits) and data 2). When input level of SK pin is high level and input level of chip select (CS) pin is changed from high level to low level, AK6420A/40A/80A can receive the instructions. Special features of the AK6420A/40A/80A include : automatic write time-out with auto-ERASE, Ready/Busy status signal output and ultra-low standby power mode when deselected (CS=high). Software and Hardware controlled write protection The AK6420A/40A/80A has 2 (hardware and software) write protection functions. After power on or after execution of WRDS (write disable) instruction, execution of WRITE instruction will be disabled. This write protection condition continues until WREN instruction is executed or Vcc is removed from the part. Execution of READ instruction is independent of both WREN and WRDS instructions. Reset pin should be low level when WRITE instruction is executed. When the Reset pin is high level, the WRITE instruction is not executed. Ready/Busy status signal During the automatic write time-out period (BUSY status), the AK6420A/40A/80A can't accept the other instructions. The AK6420A/40A/80A has 2 functions to know the Busy status from exterior. The RDY/BUSY pin indicates the Busy status regardless of the CS pin status. The RDY/BUSY pin outputs the low level regardless of the CS pin status during Busy status. Except the above status, this pin outputs high level. Also the DO pin indicates the Busy status. When input level of SK pin is low level and input level of CS pin is changed from high level to low level, the is in the status output mode and the DO pin indicates the Ready/Busy status. The Ready/Busy status outputs on DO pin until CS pin is changed from low level to high level, or first bit ("1") of op-code of next instruction is given to the part. Except when the device is in the status output mode or outputs data, the DO pin is in the high impedance state. Type of Products Model AK6480AF AK6480AM

Package 8pin Plastic SOP 8pin Plastic SSOP 8pin Plastic SOP 8pin Plastic SSOP 8pin Plastic SOP 8pin Plastic SSOP


Some Part number from the same manufacture
Same catergory

MH61FDG : 8 pin DIP, 3.3 or 5.0 Volt, Hcmos/ttl Clock Oscillator. Standard 8 DIP Package or 5.0 Volt Versions RoHs Compliant Version available (-R) Low Jitter Tristate Option Wide Operating Temperature Range MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see for our complete.

2SD866R : Si NPN Epitaxial Planar.

RBP-12112SNFS : 1-6 Pole Miniature Rotary Switches. /Benefits Rotary switch for low current Shaft perpendicular to PCB Index mechanism included in thickness of switch Several actuation modes Low profile Mechanical Data Max. number of banks Operating torque Stop strength End stop Contact material Insulating material 1 2.5 Ncm 25% (1 pole) > 40 Ncm With/without or mobile Silver, Gold Thermoplastic Gold.

UE458 : SAW Filter Technical . Rating CW RF power Dissipation DC Voltage between any 2 pins Operating Temperature Value +50 0C Characteristic Center Frequency (f0) 2dB Bandwidth 40dB Bandwidth 50dB Bandwidth Insertion Loss Amplitude Ripple Ultimate Rejection Ambient Temperature Package Substrate Material Unit MHz 0 C Minimum 457.7 3.00 Typical 4.3mm3) 36-LiTaO3 Maximum .

STE325EC10 : 6 Pad Clipped Sinewave TCXO Oscillator. Supply Voltage / 5=5.0Vdc Frequency Stability Table 1 Operating Temp. Range Table 1 Frequency M=MHz Frequency Deviation Blank=No Connection (TCXO) 5=5ppm Min. / 10=10ppm Min. Output T=TTL / M=HCMOS / C=Compatible / S=Clipped Sinewave Frequency Range Frequency Stability Operating Temperature Range Storage Temperature Range Supply Voltage Load Drive.

F03-20T : Liquid Leakage Sensor Amplifier with Disconnection Detection Function.

BL-BK23J4 : LED Lamps .

SUR6080 : Ultra Fast Recovery Epitaxial Diodes. Test Conditions TVJ=TVJM TC=85oC; rectangular, d=0.5 tp<10us; rep. rating, pulse width limited by TVJM t=10ms (50Hz), sine t=8.3ms (60Hz), sine t=10ms(50Hz), sine t=8.3ms(60Hz), sine t=10ms (50Hz), sine t=8.3ms (60Hz), sine t=10ms(50Hz), sine t=8.3ms(60Hz), sine TVJ TVJM Tstg Ptot Md Weight TC=25oC Mounting torque Test Conditions TVJ=25oC; VR=VRRM.

1437540-5 : Tin-Lead Through Hole Socket For Ics, Transistor Connectors, Interconnect Through Hole; CONN SCKT DIP 32PS VERT TIN-LEAD. s: Contact Finish: Tin-Lead ; : Open Frame ; Mounting Type: Through Hole ; Pitch: 0.100" (2.54mm) ; Number of Positions or Pins (Grid): 32 (2 x 16) ; Type: DIP, 0.6" (15.24mm) Row Spacing ; Contact Finish Thickness: 80in (2.03m).

CRCW12101M10JNEA : 1.1M Ohm 0.5W, 1/2W Chip Resistor - Surface Mount; RES 1.1M OHM 1/2W 5% 1210 SMD. s: Resistance (Ohms): 1.1M ; Power (Watts): 0.5W, 1/2W ; Tolerance: 5% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: 200ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

570-260-001 : Rectangular - Accessory Connectors, Interconnect Seal; 568/570 WIRE SEAL BLCK .067-.075. s: Accessory Type: Seal ; Number of Positions: - ; For Use With/Related Products: 570 Series ; : Splash-Proof ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

09644247210 : 37 CONTACT(S), MALE, D SUBMINIATURE CONNECTOR, SOLDER. s: Connector Type: D-Sub ; Gender: Male ; Termination Types: SOLDER ; Number of Contacts: 37 ; RoHS Compliant: RoHS.

FC0402E9200BSTS : RESISTOR, 0.05 W, 0.1 %, 25 ppm, 920 ohm, SURFACE MOUNT, 0402. s: Category / Application: General Use ; Mounting / Packaging: Surface Mount Technology (SMT / SMD), 0402, CHIP, ROHS COMPLIANT ; Resistance Range: 920 ohms ; Tolerance: 0.1000 +/- % ; Temperature Coefficient: 25 ±ppm/°C ; Power Rating: 0.0500 watts (6.70E-5 HP) ; Operating DC Voltage:.

HHM1731E2 : 1710 MHz - 1880 MHz RF TRANSFORMER. s: Category: Signal ; Other Transformer Types / Applications: RF ; Mounting: Chip Transformer ; Operating Temperature: -40 to 85 C (-40 to 185 F).

0-C     D-L     M-R     S-Z