|Datasheet||Download AK93C45AV datasheet
This document is not intended for viewing onscreen. It is best viewed when printed and read from paper.
Depending on your printer, you may need to select "Shrink to Fit" in the print dialog to ensure that the document prints correctly.Features
1 ADVANCED CMOS 1%PROM TECHNOLOGY READ/WRITE NON-VOLATILE MEMORY WIDE VCC OPERATION VCC 5.5V 1024 bits, X 16 organization SERIAL INTERFACE - Interfaces with popular microcontrollers and standard microprocessors LOW POWER CONSUMPTION - 0,5mA max. Read Operation u A Max. Standby Automatic address increment (READ) Automatic write cycle time-out with auto-ERASE Busy/Ready status signal Software controlled write protection IDEAL FOR LOW DENSITY DATA STORAGE - Low cost, space saving, 8-pin packageDATA FUWAMPS AND AUTO ERASE > +1024bit ADD. BUFFERS DECODER
The a 1024-bit serial CMOS EZPROM divided into 64 registers of 16 bits each. The AK93C45A has 4 instructions such as READ, WRITE, EWEN and EWDS. Those instructions control the AK93C45A. The AK93C45A can operate full function under wide operating voltage range from to 5.5V. The charge up circuit is integrated for high voltage generation that is used for write operation. A serial interface of AK93C45A, consisting of chip select (CS), serial clock (SK), data-in (Dl) and data-out (DO), can easily be controlled by popular microcontrollers or standard microprocessors. AK93C45A takes in the write data from data input pin (Dl) to a register synchronously with rising edge of input pulse of serial clock pin (SK). And at read operation, AK93C45A takes out the read data from a register to data output pin (DO) synchronously with rising edge of SK. The DO pin is usually in high impedance state. The DO pin outputs "L" or "H" in case of data output or Busy/Ready signal output.
o Software controlled write protection When Vcc is applied to the pafl, the part automatically powers up in the ERASEANRITE Disable state. In the ERASE/WRITE disable state, execution of WRITE instruction is disabled. Before WRITE instruction is executed, EWEN instruction must be executed. The ERASEAMRITE enable state continues until EWDS instruction is executed or Vcc is removed from the part. Execution of a read instruction is independent of both EWEN and EWDS instructions.
o Busy/Ready status signal After a write instruction, the DO output serves as a Busy/Ready status indicator. After the falling edge of the CS initiates the self-timed programming cycle, the DO indicates the Busy/Ready status of the chip if the CS is brought high after a minimum of 250ns (Tcs). DO=logical "O" indicates that programming is still in progress. DO=logicaI "1" indicates that the register at the address specified in the instruction has been written with the new data pattern contained in the instruction and the part is ready for a next instruction. The Busy/Ready status indicator is only valid when CS is active (high). When CS is low, the DO output goes into a high impedance state. The Busy/Ready signal outputs until a start bit (Logic"l") of the next instruction is given to the part.
of Products Memory size 1024 bits 1024 bits 1024 bits Temp. Range -40~x85~ -40~ti85~ Vcc - 5.5V Package 8pin Plastic DIP 8pin Plastic SOP 8pin Plastic TSSOP
|Some Part number from the same manufacture|
ATIR0711S : Material: GAAS/sic , Wavelength: 940nm. Compact and thin. Visible light cut-off type. High sensitivity. Cassette tape recorders,VCRs. Floppy disk drives. Various microcomputerized control equipment. UNIT : MM[INCH] TOLERANCE UNLESS OTHERWISE NOTED. Par et er Forward Current Input Reverse voltage Power dissipation Collector power dissipation Output Collector current Collector-emitter voltage.
HUF75343G3 : 75A, 55V, 0.009 Ohm, N-channel UltraFET Power MOSFETs. These N-Channel power MOSFETs are manufactured using the innovative UltraFET® process. This advanced process technology achieves the lowest possible onresistance per silicon area, resulting in outstanding performance. This device is capable of withstanding high energy in the avalanche mode and the diode exhibits very low reverse recovery time and stored.
LT1280AC : Low Power 5v Rs232 Dual Driver/receiver With 0.1uf Capacitors. LT1280A/LT1281A Low Power 5V RS232 Dual Driver/Receiver with 0.1µF Capacitors DESCRIPTIO The LT ®1280A/LT1281A are dual RS232 driver/receiver pairs with integral charge pump to generate RS232 voltage levels from a single 5V supply. These circuits feature rugged bipolar design to provide operating fault tolerance and ESD protection unmatched by competing.
SM6T6V8 : General Purpose. Transil(tm). PEAK PULSE POWER W (10/1000µs) BREAKDOWN VOLTAGE RANGE : From 220 V. UNI AND BIDIRECTIONAL TYPES LOW CLAMPING FACTOR FAST RESPONSE TIME UL RECOGNIZED Transil diodes provide high overvoltage protection by clamping action. Their instantaneous response to transient overvoltages makes them particularly suited to protect voltage sensitive devices such as MOS Technology.
UPS601 : HIGH Performance Current MODE Power Switch. HIGH PERFORMANCE CURRENT MODE POWER SWITCH The UTC UPS601 is designed to provide several special enhancements to satisfy the needs: Power-Saving mode for low standby power, Over Current Protection (OCP), Over Voltage Protection (OVP), Over Load Protection (OLP), UVLO, Over Temperature Protection (OTP) etc protection . IC will be shutdown when either.
6MBP25TEA-120-50 : IGBT, 6 PACK MOD, 1200V, 25A, P622. s: Module Configuration: - ; Transistor Polarity: - ; DC Collector Current: 25A ; Collector Emitter Voltage Vces: 2.4V ; Power Dissipation Pd: - ; Collector Emitter Voltage V(br)ceo: 1.2kV ; Operating Temperature Range: -20°C to +100°C ; Transistor Case Style: Module ; No. of Pins: 25.
ESC36DRSD-S273 : Gold Through Hole Card Edge, Edgeboard Connector Connectors, Interconnect Non Specified - Dual Edge; CONN EDGECARD 72POS DIP .100 SLD. s: Card Thickness: 0.093" (2.36mm) ; Card Type: Non Specified - Dual Edge ; Contact Finish: Gold ; Mounting Type: Through Hole ; : - ; Number of Positions: 72 ; Number of Rows: 2 ; Pitch: 0.100" (2.54mm) ; Packaging:.
PIC18F6585-E/L : Embedded - Microcontroller Integrated Circuit (ics) External Tube 4.2 V ~ 5.5 V; IC PIC MCU FLASH 24KX16 68PLCC. s: Program Memory Size: 48KB (24K x 16) ; RAM Size: 3.25K x 8 ; Number of I /O: 52 ; Package / Case: 68-LCC (J-Lead) ; Speed: 25MHz ; Oscillator Type: External ; Packaging: Tube ; Program Memory Type: FLASH ; EEPROM Size: 1K x 8 ; Core Processor:.
AT85RFD-07 : Obsolete/discontinued Part Number Programmers, Development System; REFERENCE DESIGN FOR AT85C51SND3. s: Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant.
KSZ9021RL : Interface - Drivers, Receivers, Transceiver Integrated Circuit (ics) Transceiver Tray 3.135 V ~ 3.465 V; IC TXRX 10/100/1000 SGL 64LQFP. s: Number of Drivers/Receivers: 8/8 ; Type: Transceiver ; Voltage - Supply: 3.135 V ~ 3.465 V ; Package / Case: 64-LQFP Exposed Pad ; Packaging: Tray ; Protocol: Gigabit Ethernet ; Lead Free Status: Lead Free ; RoHS.
GL34DHE3/98 : Diodes, Rectifier - Single Discrete Semiconductor Product 500mA 200V Standard; DIODE 0.5A 200V STD MELF. s: Diode Type: Standard ; Voltage - DC Reverse (Vr) (Max): 200V ; Current - Average Rectified (Io): 500mA ; Voltage - Forward (Vf) (Max) @ If: 1.2V @ 500mA ; Reverse Recovery Time (trr): 1.5µs ; Current - Reverse Leakage @ Vr: 5µA @ 200V ; Speed:.
TNPW060339K0BETA : 39K Ohm 0.1W, 1/10W Chip Resistor - Surface Mount; RES 39.0K OHM 1/10W 0.1% 0603. s: Resistance (Ohms): 39K ; Power (Watts): 0.1W, 1/10W ; Tolerance: ±0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: ±25ppm/°C ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant.
M55342K02B10B1MT1 : RESISTOR, THIN FILM, 0.125 W, 0.1 %, 100 ppm, 10100 ohm, SURFACE MOUNT, 0505. s: Category / Application: General Use ; Technology / Construction: Thin Film (Chip) ; Mounting / Packaging: Surface Mount Technology (SMT / SMD), CHIP ; Resistance Range: 10100 ohms ; Tolerance: 0.1000 +/- % ; Temperature Coefficient: 100 Â±ppm/Â°C ; Power Rating: 0.1250.
PN5415-T/R : 500 mA, 200 V, PNP, Si, SMALL SIGNAL TRANSISTOR, TO-92. s: Polarity: PNP.
SI4845DY-T1-GE3 : SMALL SIGNAL, FET. P-Channel 20-V (D-S) MOSFET with Schottky Diode Halogen-free According to IEC 61249-2-21 Definition LITTLE FOOT® Plus Integrated Schottky Compliant to RoHS Directive 2002/95/EC APPLICATIONS Top View Ordering Information: Si4845DY-T1-E3 (Lead (Pb)-free) Si4845DY-T1-GE3 (Lead (Pb)-free and Halogen-free) P-Channel MOSFET A G ABSOLUTE MAXIMUM RATINGS = 25 °C, unless.
XZMOK45FW : SINGLE COLOR LED, ORANGE, 2.4 mm. s: LED Type: Orange ; Peak Wavelength: 610 nm (6100 Ã…) ; Viewing Angle: 120 degrees ; Luminous Intensity: 0.2970 milliCandela ; Forward Current: 30 milliamps ; LED Package : ROHS COMPLIANT, PLASTIC, SMD, LCC-2.