|
|
Part: E3T-FT14
Category:
Description: Photoswitch Separate PNP
Company:
Datasheet: Download E3T-FT14 datasheet File size : 744 kB
Request For quote: Find where to buy E3T-FT14
Datasheet text preview:
"Mini" Photoelectric Sensor
High cost-performance "Mini" Photoelectric Sensor Saves Installation Space and Wiring Effort and Detects Minute Sensing Objects
"Pin-point" beam (1 to 2-mm dia.) makes it possible to detect minute sensing objects. Saves wiring effort, even with compact body. Work steps can be reduced to half with the retroreflective or limited reflective model. Easy-to-use with a clearly-visible "Pin-point" beam. Long sensing distance of 1 meter is possible with the through-beam model.
E3T
Ordering Information
Photoelectric Sensors
Item Through-beam Appearance Side-view Flat Sensing method Retroreflective Side-view Diffuse reflective Flat Limited reflective Side-view
Sensing distance
1m
500 mm
200 mm (10 mm) (see note) E3T-SR11 E3T-SR13 E3T-SR12 E3T-SR14
5 to 30 mm
5 to 15 mm
5 to 30 mm
Model
Light-ON Dark-ON
NPN PNP NPN PNP
E3T-ST11 E3T-ST13 E3T-ST12 E3T-ST14
E3T-FT11 E3T-FT13 E3T-FT12 E3T-FT14
E3T-FD11 E3T-FD13 E3T-FD12 E3T-FD14
E3T-SL11 E3T-SL13 E3T-SL12 E3T-SL14
E3T-SL21 E3T-SL23 E3T-SL22 E3T-SL24
Note:
Set the distance between the Sensor and Reflector to a value larger than the one indicated in parentheses.
Accessories (Order Separately)
Slits
For E3T-ST1j Slit width Sensing distance (typical) 100 mm Minimum sensing object (typical) 0.5 dia. Model Remarks For E3T-FT1j Slit width Sensing distance Minimum sensing object (typical) 0.5 dia. Model Remarks
0.5 dia.
E39-S63
1 dia.
300 mm
1 dia.
One each for Emitter and Receiver; common with with Slit widths of 1 dia. and 0.5 dia.
0.5 dia.
50 mm
E39-S64
1 dia.
100 mm
1 dia.
One each for Emitter and Receiver; common with with Slit widths of 1 dia. and 0.5 dia.
1
E3T
Reflectors
Name Sensing distance 200 mm (10 mm) (rated value) (see note 2) 100 mm (10 mm) (see note 2) Note: Minimum sensing object (typical) 2 dia. Model
E3T
Mounting Brackets
Model E39-L116 E39-R4 (see note 1) Appearance Applied model Common with the E3T-Sj. Remarks Two mounting brackets are required for through-beam models.
For retroreflective model
E39-R37
E39-L117
1. Attached to the E3T-SR1j retroreflective model. 2. Set the distance between the Sensor and Reflector to a value larger than the one indicated in parentheses.
E39-L118
Sensitivity Adjustment Unit
For E3T-ST1j Appearance Sensing distance (typical) 300 to 800 mm Model E39-E10 E39-L119 Common with the E3T-Fj.
E39-L120
Application Examples
Detection of Lead Frame Rise (Pressure Machines) Checking of IC Set (Handler)
E3T-ST1j
E3T-ST1j
E3T-ST1j
Conventional photoelectric sensor
Malfunctions due to the light reflection of the metal surface.
Detection of IC Chips on Tape (Taping Machines)
Reflector
Detection of Cassette or Magazine on the Conveyor
IC chip
E3T-ST1j E3T-SR1j
2
E3T
E3T
Specifications
E3T-jjjj
Item
Ratings/Characteristics
Through-beam Side-view NPN Light-ON Dark-ON -ST11 -ST12 PNP -ST13 -ST14 NPN -FT11 -FT12 500 mm Flat PNP -FT13 -FT14 NPN -SR11 -SR12 PNP -SR13 -SR14 Retroreflective Limited reflective Side-view NPN -SL11 -SL12 PNP -SL13 -SL14 NPN -SL21 -SL22 PNP -SL23 -SL24 NPN -FD11 -FD12 Diffuse reflective Flat PNP -FD13 -FD14
Sensing distance Standard sensing object (white paper) Min. sensing object (typical) Differential travel Directional angle
1 m (Sensitivity Adjustment Unit is available)
200 mm (10 mm) (see note) (with the E39-R4) Opaque, 27 dia. min.
5 to 15 mm (50 x 50 mm white paper) ---
5 to 30 mm (50 x 50 mm white paper)
5 to 30 mm (50 x 50 mm white paper)
Opaque, 2 dia. min.
Opaque, 2 dia. min.
2 dia. (sensing distance of 100 mm)
0.15 dia. (sensing distance of 10 mm)
--Emitter: 3° to 10° Receiver: 3 to 70° Emitter: 3° to 13° Receiver: 3 to 70° Emitter: 2° to 5°
2 mm max. ---
6 mm max.
6 mm max.
Light source (wave length) Power supply voltage Current consumption Control output Circuit protection Protection Response time Ambient illumination (on Receiver lens) Ambient temperature Ambient humidity Insulation resistance Dielectric strength Vibration resistance Shock resistance Degree of protection Connection method Weight (with packaging)
Red LED ("Pin-point" LED) (=670 nm) 12 to 24 VDC ±10%, ripple (p-p) 10% max. 24 VDC ±10%
Emitter/Receiver: 12 mA max.
20 mA max.
Open collector, load current: 50 mA max. at 24 VDC, residual voltage: 1 V max., operation mode: Light ON or Dark ON (separate models) Protection from reversed power supply connection and output short-circuit Protection from reversed power supply connection, output short-circuit, and mutual interference
Protection from reversed power supply connection and output short-circuit 1 ms max. each for operation and release Incandescent lamp: 5,000 x max. Sunlight: 10,000 x max. Operating: 25°C to 55°C Storage: 40°C to 70°C (with no icing or condensation) Operating: 35% to 85% Storage: 35% to 95% (with no condensation) 20 M min. (at 500 VDC) 1,000 VAC, 50/60 Hz for 1 min Destruction: 10 to 2,000 Hz, 1.5-mm double amplitude or 300 m/s2 (approx. 30G) for 0.5 hrs each in X, Y, and Z directions Destruction: 1,000 m/s2 (approx. 100G) 3 times each in X, Y, and Z directions IEC60529: IP67 Prewired (standard length: 2 m) Approx. 40 g Approx. 20 g
3
E3T
Item Through-beam Side-view NPN Light-ON Dark-ON Materials Accessories Note: -ST11 -ST12 PNP -ST13 -ST14 NPN -FT11 -FT12 Flat PNP -FT13 -FT14 NPN -SR11 -SR12 PNP -SR13 -SR14 Retroreflective Limited reflective Side-view NPN -SL11 -SL12 PNP -SL13 -SL14 NPN -SL21 -SL22 PNP -SL23 -SL24 NPN -FD11 -FD12
E3T
Diffuse reflective Flat PNP -FD13 -FD14
Case: PBT Lens and cover: Polycarbonate Phillips-head screws (side-view type: M2 x 14, flat type: M2 x 8), nuts, spring washers, flat washers, instruction sheet, and Reflector (for retroreflective model only)
Set the distance between the Sensor and Reflector to a value larger than the one indicated in parentheses.
Engineering Data
Excess Gain vs. Set Distance (Typical)
E3T-ST1j (Through-beam)
Excess gain ratio
E3T-FT1j (Through-beam)
Excess gain ratio
E3T-SR1j with E39-R4 (Retroreflective)
Excess gain ratio
Operation level
Operation level
0
400
800
1200
1600
2000
Set distance (mm)
Set distance (mm)
Operation level
Set distance (mm)
E3T-FD1j(Diffuse Reflective)
Excess gain ratio
E3T-SL1j(Limited Reflective)
Excess gain ratio
E3T-SL2j(Limited Reflective)
Excess gain ratio
White paper
White paper
White paper
Black paper
Operation level Black paper
Operation level Black paper
Set distance (mm)
Set distance (mm)
Set distance (mm)
4
E3T
Parallel Operating Range (Typical) (Through-beam)
E3T-ST1j with Slit
Distance Y (mm) Without Slit 1-dia. Slit 0.5-dia. Slit
400 800 1,200 1,600 2,000
E3T
(Retroreflective)
E3T-SR1j with E39-R4
Distance Y (mm)
E3T-ST1j with Slit (Enlarged graph)
Distance Y (mm)
0.5-dia. Slit
1-dia. Slit
Distance X (mm)
Distance X (mm) Distance X (mm)
E3T-FT1j with Slit
Distance Y (mm)
E3T-FT1j with Slit (Enlarged graph)
Distance Y (mm)
1-dia. Slit 0.5-dia. Slit
Without Slit
1-dia. Slit 0.5-dia. Slit
200
400
600
800
1,000
Distance X (mm)
Distance X (mm)
Angle Characteristics (Typical)
E3T-SL1j (Up and Down)
Sensing distance change rate (%) Sensing object: 100 x 100 mm white paper
E3T-SL1j (Left and Right)
Sensing distance change rate (%) Sensing object: 100 x 100 mm white paper
Close-distance Sensing Capability (Typical)
E3T-SL1j, E3T-SL2j, E3T-FD1j
Sensing distance (mm) j White paper J Black paper
Angle (°)
Angle (°)
E3T-SL1j
E3T-SL2j
E3T-FD1j
Sensing Object Size vs. Sensing Distance (Typical)
E3T-SL1j
Min. sensing object dia. (mm) Min. sensing object dia. (mm)
E3T-FD1j, E3T-SL2j
Sensing object: Pin-gauge, stainless steel
E3T-FD1j
E3T-SL2j Sensing distance (mm)
Sensing distance (mm)
5
Others parts begin by e3
E3-1 E3-2 E3-3 E3-4
|
|
|
