|
Details, datasheet, quote on part number:EQ-DS520-ST
| |
Datasheet text preview:
USER GUIDE
(Version 1.00)
Dallas 80C320/87C520 Starter Kit User Manual V1.00 Copyright Information
Equinox guarantees that its products will be free from defects of material and workmanship under normal use and service, and these products will perform to current specifications in accordance with, and subject to, the Company's standard warranty which is detailed in Equinox's Purchase Order Acknowledgment. Equinox reserves the right to change specifications detailed in this document without notice and does not represent a commitment on the part of the manufacturer. The software described in this document is furnished under license agreement or non-disclosure agreement and may be used or copied only in accordance with the terms of the agreement. It is against the law to copy the software on any medium except as specifically allowed in the license or non-disclosure agreement. The purchaser may make one copy of the software for backup purposes. No part of this manual may be reproduced or transmitted in any form or by any means, electronic, mechanical, including photocopying, recording, or information retrieval systems, for any purpose other than for the purchaser's personal use, without written permission.
© 1999 Copyright Equinox Technologies UK Limited. All rights reserved. Dallas SemiconductorsTM is a trademark of the Dallas Semiconductor Corporation Microsoft, MS-DOS, WindowsTM and Windows 95TM Windows NTTM are registered trademarks of the Microsoft Corporation IBM, PC and PS/2 are registered trademarks of International Business Machines Corporation Every effort was made to ensure accuracy in this manual and to give appropriate credit to persons, companies and trademarks referenced herein.
i
User Manual V1.00 Dallas 80C320/87C520 Starter Kit Electromagnetic Compatibility (EMC) Compliance
The Dallas 87C520/80C320 Programmer is a CE Approved Product. It is designed only for use in a development environment only. This means that the user must ensure that there is no possibility of damage from electrostatic discharge (ESD). Since the devices and equipment to which this product is likely to be connected may well themselves be susceptible to ESD, this should not pose any difficulty. For example, if you are handling microcontrollers and EEPROMS etc. then you will already be used to appropriate precautions, such as the use of anti-static mats, wrist straps and so on. You should treat your Dallas 87C520/80C320 with the same care as you would these type of device. Always ensure that you are not yourself carrying a static charge before handling the product. Wearing an earthed anti-static wrist strap is recommended. Equinox have taken great care in designing this product to be compliant with the European EMC directive. When using the equipment be sure to follow the instructions provided. Although RF emissions are within prescribed limits, care should be taken if you are using the product near to sensitive apparatus. If you experience any difficulty please refer to Equinox technical support. ESD Points to remember
q q
Work in a static-free environment. Wear an earthed wrist strap when handling either the programmer and/or any programmable device.
Please Note:
This equipment is NOT designed to be used in a production environment.
ii
Dallas 80C320/87C520 Starter Kit User Manual V1.00 Technical Support
It is often the case that users experience problems when installing or using a product for the first time. Due to the low-cost nature of this product, Equinox are unable to answer technical support questions about this product or its use by telephone. If you have a technical support problem, please consult the following list for help: 1 This manual 2 Troubleshooting Guide (see page 17) 3 On-line help The Keil PK51-2K IDE (µVision and dScope) feature on-line context sensitive help. Press for help at any time. Simply press on any error message and the possible causes of the error should be listed. This help system is updated on a regular basis. Please see software update details for information on keeping up-to-date with software revisions. 4 Internet Web Site i Equinox Web site The microcontroller support page can be found at: www.equinox-tech.com or ii Keil On-Line Technical Support Database Keil operate a `Technical Support Database' on their website which provides up-to-date answers to real technical support questions: www.keil.com 5 E-mail Please e-mail any technical support questions about this product to: ds520@equinox-tech.com Equinox will try our best to answer your questions about this product as quickly as possible. However, we can not promise an immediate reply. Please consult our web site for new software updates as the problem that you are enquiring about may have already been fixed in a new version. 6 Fax Please fax any technical support questions about this product to: +44 (0) 1204 535555 Equinox will try our best to answer your questions about this product as quickly as possible. However, we can not promise an immediate reply. Please consult our web site for new software updates as the problem that you are enquiring about may have already been fixed in a new version.
iii
User Manual V1.00 Dallas 80C320/87C520 Starter Kit Contacts
Equinox Technologies UK Limited
3 Atlas House, St Georges Square, Bolton, England BL1 2HB
Telephone Sales ..... : +44 (0) 1204 529000 Fax .... : +44 (0) 1204 535555 E-mail ........ : sales@equinox-tech.com Web site ... : www.equinox-tech.com
For technical support on this product please e-mail us at: ds520@equinox-tech.com
iv
|
|
